JUST RELEASED: Visit the Incredible PBX WikiGetting Started
An ISO can’t be used as the installation media at CloudAtCost. Start by building a 64-bit Debian 9 virtual machine with at least 1GB RAM and a 10GB virtual drive. No need to choose a larger drive at the moment since there’s a bug in CloudAtCost’s installer for Debian 9.
Once you’ve built and started the virtual machine, log into your server as root using SSH/Putty and immediately change your root password: passwd
Perform these initial steps:
sed -i '/exit 0/d' /etc/rc.local killall plymouthd echo killall plymouthd >> /etc/rc.local rm -f /etc/rc3.d/S97* echo "exit 0" >> /etc/rc.local
Debian/Wazo/Incredible PBX Installation
While logged into your server as root using SSH/Putty, change your root password: passwd
Then issue the following commands to kick off the base install:
cd /root sed -i 's|127.0.1.1\\tlocalhost|127.0.1.1\\txivo.incrediblepbx.com\\tlocalhost.localdomain|' /etc/hosts hostname xivo.incrediblepbx.com sed -i 's|localhost|xivo|' /etc/hostname wget http://incrediblepbx.com/IncrediblePBX15-Wazo.sh chmod +x IncrediblePBX15-Wazo.sh ./IncrediblePBX15-Wazo.sh # enter .q at the : prompt during Debian upgrade process
After rebooting, log into your server again as root and issue the following command to complete the Wazo and Incredible PBX installation and configuration:
./IncrediblePBX15-Wazo.sh
You now can proceed to Incredible PBX Initial Configuration tutorial to continue your setup.
