IncrediblePBX – Page 24

VoIP 101: Developing a Cost-Effective SIP Strategy

Monday, June 11, 2018 / 3 Comments on VoIP 101: Developing a Cost-Effective SIP Strategy

In the lead up to the demise of Google Voice XMPP service next week, we wanted to offer what we have found to be a cost-effective SIP strategy which takes advantage of the best of all worlds. We would divide SIP offerings into five broad categories: business-class unlimited SIP trunks, Old Faithful SIP providers, Mom-and-Pop SIP services, dirt-cheap termination services, and Gee Whiz SIP providers. As we have said many times, the beauty of setting up an Asterisk® PBX such as Incredible PBX® is you don’t have to put all your VoIP eggs in one basket. In our particular case, that has included a mix of Google Voice trunks plus all five of the SIP categories above. Today we want to document why we’ve personally made the selections we’ve made and hope that it provides a roadmap for your own VoIP setup while encouraging you to venture out of your safe zone and try some new VoIP options.

The all-you-can-eat business plans, which we previously have covered, make little sense for most home and small business users. Then there are the rock-solid, long term pay-as-you-go providers such as Vitelity and CallCentric that make perfect sense as your primary DID and SIP provider. While they may not always be the cheapest VoIP providers, the tradeoff is dependability and long-term reliability for your VoIP platform. In the case of Vitelity, it turns out the Nerd Vittles DID special (detailed below) from our Platinum Sponsor is perhaps one of the best VoIP deals on the planet.

The third category of SIP providers and our personal favorite is what we would call the mom-and-pop providers. These are typically one or two-person operations that offer incredible deals on all-you-can-eat VoIP plans for home users. Included in this category are Vestalink (available to existing customers only), Future-Nine and CircleNet. VestaLink originally began as OBiVoice and morphed over trademark issues. While the service is no longer available to new customers, it remains the best bargain at $72 for two years of unlimited inbound and outbound residential calling services. A close second goes to Future-Nine and their "Future 5 Grey" plan which provides 1,500 inbound and 1,500 outbound minutes a month for only $5. You can sign up here. Be sure to read the Terms of Services carefully, especially item #18. The New Kid on the Block is CircleNet. In addition to very attractive pay-by-the-minute offerings of $.005 per minute to most of the U.S. and Canada, they also have an $8 a month all-you-can-eat plan for residential customers that includes a very reasonable 5,000 minutes a month for calls to the following countries: United States, Canada, Australia, Bangladesh, Belgium, Brazil, Chile, Cyprus, Denmark, Finland, France, Germany, Greece , Guam, Hungary, India,Ireland, Italy, Japan, Latvia, Mexico, Netherlands, New Zealand, Norway, Poland, Puerto Rico, Singapore, Spain, Sweden, Taiwan, Thailand, United Kingdom, and Vatican City. Just let them know that you plan to use it with an Asterisk-based PBX. CircleNet also is offering Nerd Vittles readers a free month of the $8/month service to kick the tires. Simply send an email to sales@circlenet.us with your valid email address to take advantage of the offer. One free trial per customer/email address. CircleNet also offers a $15 a month business plan with even more minutes.

A fourth class of VoIP providers is the dirt-cheap termination services including Anveo Direct, TelecomsXchange, V1VoIP and the Betamax companies for low-cost international calling. These providers make terrific additions for supplementing your other VoIP services. TelecomsXchange is our personal favorite because of the special deal they have extended to Incredible PBX users. You get access to 300 VoIP wholesalers and can read about their services in this Nerd Vittles article. V1VoIP also has some terrific deals with 15¢/mo. DIDs from 13,000 Rate Centers and incoming and outgoing U.S. call pricing as low as $.003 per minute (not a typo!). Anveo Direct was perhaps the first provider to offer wholesale pricing to consumers, and they remain a terrific service both for DID and origination services with T.38 fax support as well as many of the lowest cost SIP terminations worldwide featuring user-configurable least-cost routing. Check out their pricing and rates here.

Finally, there are the SIP providers such as VoIP.ms that offer a rich collection of special features that you won’t find in many places and certainly not under the same roof. These features include SMS messaging, SIP URI proxying and iNUM for free worldwide calling, and fax support. Every one of these features is free when you sign up for an account at VoIP.ms. We encourage you to take advantage of these little known free services to enhance your PBX.

Putting It All Together. Now that we’ve covered the options, let’s go over how we would actually implement this. For the inbound trunk and primary DID, we’d recommend a SIP trunk from either Vitelity, VoIP.ms, or CallCentric. If you have multiple, simultaneous inbound calls, then the Nerd Vittles Vitelity special below can’t be beat because it provides four call paths. In addition, you get SMS support on the same trunk. Many people now assume your primary number supports SMS. We actually get dozens of unsolicited SMS messages on our home number from schools, churches, and political groups. If incoming call volume isn’t an issue, then VoIP.ms and CallCentric also offer a free iNUM number for your account. And VoIP.ms throws in a SIP URI as well.

For outbound calling for home and SOHO deployments, we recommend at least one of the mom-and-pop, all-you-can-eat providers: Future-Nine or CircleNet. If international calling is a requirement, you can’t beat the CircleNet offering. In addition to using your primary incoming provider, we also recommend you set up SIP accounts with a couple of the dirt-cheap termination providers. These don’t cost you anything other than a modest deposit unless you actually use them to place calls. And, when your primary outbound service has an outage, your PBX will never miss a beat.

The icing on the cake always has been several Google Voice trunks which work well for IVRs, Stealth AutoAttendants with DISA support, and faxing. While this may change with the demise of XMPP support, it appears that Bill Simon’s SIP Gateway to Google Voice will live on. With the Nerd Vittles sign-up link, you can migrate your existing Google Voice XMPP connections to the Simonics gateway for $4.99 each should the need arise. Enjoy!

Originally published: Monday, June 11, 2018

CircleNet SIP Setup for FreePBX/IncrediblePBX/VitalPBX/Issabel:

username=acct-id
type=friend
trustrpid=yes
sendrpid=yes
secret=acct-pword
qualify=yes
nat=yes
insecure=port,invite
host=sip.circlenet.biz
fromuser=acct-id
context=from-trunk
disallow=all
allow=ulaw

Registration String: acct-id:acct-pword@sip.circlenet.biz:5060/did-num

Future-Nine SIP Setup for FreePBX/IncrediblePBX/VitalPBX/Issabel:

username=acct-num
type=friend
trustrpid=yes
sendrpid=yes
secret=acct-pword
qualify=yes
nat=yes
insecure=port,invite
host=incoming.future-nine.com
fromuser=acct-num
context=from-trunk
canreinvite=no
disallow=all
allow=ulaw

Registration String: acct-num:acct-pword@incoming.future-nine.com/acct-num

Need help with Asterisk? Visit the PIAF Forum.

Special Thanks to Our Generous Sponsors

FULL DISCLOSURE: ClearlyIP, Skyetel, Vitelity, DigitalOcean, Vultr, VoIP.ms, 3CX, Sangoma, TelecomsXchange and VitalPBX have provided financial support to Nerd Vittles and our open source projects through advertising, referral revenue, and/or merchandise. As an Amazon Associate and Best Buy Affiliate, we also earn from qualifying purchases. We’ve chosen these providers not the other way around. Our decisions are based upon their corporate reputation and the quality of their offerings and pricing. Our recommendations regarding technology are reached without regard to financial compensation except in situations in which comparable products at comparable pricing are available from multiple sources. In this limited case, we support our sponsors because our sponsors support us.

BOGO Bonaza: Enjoy state-of-the-art VoIP service with a $10 credit and half-price SIP service on up to $500 of Skyetel trunking with free number porting when you fund your Skyetel account. No limits on number of simultaneous calls. Quadruple data center redundancy. $25 monthly minimum spend required. Tutorial and sign up details are here.

The lynchpin of Incredible PBX 2020 and beyond is ClearlyIP components which bring management of FreePBX modules and SIP phone integration to a level never before available with any other Asterisk distribution. And now you can configure and reconfigure your new Incredible PBX phones from the convenience of the Incredible PBX GUI.

VitalPBX is perhaps the fastest-growing PBX offering based upon Asterisk with an installed presence in more than 100 countries worldwide. VitalPBX has generously provided a customized White Label version of Incredible PBX tailored for use with all Incredible PBX and VitalPBX custom applications. Follow this link for a free test drive!

Special Thanks to Vitelity. Vitelity is now Voyant Communications and has halted new registrations for the time being. Our special thanks to Vitelity for their unwavering financial support over many years and to the many Nerd Vittles readers who continue to enjoy the benefits of their service offerings. We will keep everyone posted on further developments.

Some Recent Nerd Vittles Articles of Interest…

Some Fresh CallerID Magic for Incredible PBX 13-13

Wednesday, May 30, 2018 / 1 Comment on Some Fresh CallerID Magic for Incredible PBX 13-13

It’s been more than 10 years since we first introduced CallerID Trifecta for Asterisk® and the FreePBX® platform. A few months later it morphed into CallerID Superfecta and, as they say, the rest is history. Today CallerID Superfecta is used by over a million people around the globe to obtain CallerID Name (CNAM) information from over 70 different lookup sources. WOW! Just call me the Proud Papa. What a journey it has been, and our special thanks to the dozens of contributors.

Unfortunately, for those in the United States, most of the lookup sources now are commercial enterprises much like the original Bell Sisters that monopolized CallerID information by keeping it proprietary instead of forwarding CallerID Name data together with the CallerID number of incoming calls. In fact, for many users, the cost of CallerID lookups now is more expensive than the cost of the VoIP trunks carrying the calls. While we can’t solve the problem, we can make the cost of these CallerID lookup services considerably cheaper using a neat little trick with CallerID Superfecta.

Here’s the problem. Many cell phone users don’t subscribe to any service that keeps track of the caller’s identity. The same is true for those using services such as Google Voice. When you receive a call from one of these users, the CNAM provided for the caller will either show something like "Mobile Phone User" or the city and state of the caller’s cellphone provider. This doesn’t keep the commercial CNAM providers from dinging you every time you receive one of these calls. And if your girlfriend calls you a hundred times a month, the commercial CNAM providers charge you for a hundred lookups even when the calls are from the same caller. That ends today. Once you implement this new CallerID add-on, you’ll only get billed for a single CNAM lookup regardless of how many times that person calls your PBX. Better yet, with a little effort, you can quickly replace the CNAM entries of the mystery cellphone and Google Voice callers by inserting their actual names into your Asterisk phonebook using either the FreePBX GUI or the Asterisk CLI. We’ll show you how.

Here’s the trick. CallerID Superfecta lets you prioritize source lookups when incoming calls hit your PBX. For example, you can lookup the CallerID number in AsteriDex and the Asterisk Phonebook in a fraction of a second at no cost. Once there’s a match on the CallerID number of the caller, additional lookups stop. So what we want to do is prioritize the lookups so that the free sources are used before any commercial lookup service is triggered. For the commercial CNAM source in the U.S., we’re going to use OpenCNAM in our examples because their service is one of the easiest and least expensive to implement. All OpenCNAM lookup options are less than a half a cent per lookup. By placing OpenCNAM third in the Default Superfecta lookup sequence, it will only be used when there is no match in either AsteriDex or the Asterisk Phonebook.

Getting Started. It would obviously be a hassle to have to add every caller to one of these phonebooks every time a call arrives on your PBX. So the other half of today’s magic is to automatically add an entry to the Asterisk Phonebook every time a call hits your PBX. Then, the next time you receive a call from that same number, CallerID Superfecta will be able to find it in your free databases instead of querying OpenCNAM for yet another commercial lookup. As a general rule, in the United States, phonebook data is not copyrightable. However, you should consult an attorney for questions regarding the legality of this methodology as it applies to any particular CNAM lookup service.

We’re aware that CallerID Superfecta has had a caching option which provides similar functionality; however, users have reported mixed results and data corruption with that feature so we’ll be implementing a slightly different solution that relies on Asterisk’s extremely reliable SQLite3 database. This also provides the flexibility to customize the entries after completion of a call for more accurate CNAM information on subsequent calls. Unfortunately, a CNAM entry of ATLANTA, GA doesn’t tell you much about the caller even though you paid for the lookup. By inserting these call entries in the Asterisk Phonebook, you then have the option of easily customizing them in multiple ways. Not only will this provide better CNAM data on subsequent inbound calls, but the phonebook can also be used to make outgoing calls and to produce an alphabetized phonebook listing as well.

cd /var/lib/asterisk
sqlite3 astdb.sqlite3 "select key,value from astdb where key LIKE '%cidname/%' order by value"

Upgrading Asterisk Phonebook Module. Before we get too deep in the weeds, let’s get your Asterisk Phonebook module in FreePBX upgraded to resolve a bug in the version that ships with Incredible PBX which won’t let you edit phonebook entries without also adding a speed dial number for each entry. For generic FreePBX platforms, you can use Module Admin to upgrade the Phonebook module. For Incredible PBX platforms, log into your server as root and issue these commands:

cd /root
./gpl-install-fpbx phonebook

Activating CallerID Superfecta. There are three steps in activating CallerID Superfecta. First, configure the Default Scheme for CallerID Superfecta in Admin:CID Superfecta using the settings we previously displayed. Use the Arrow keys to properly order the three lookup sources: AsteriDex, Asterisk Phonebook, and OpenCNAM.

Be advised that there is a credentials mismatch in the Default setup for AsteriDex. To correct this, open the Default configuration for Superfecta and click on the Tool icon to the left of AsteriDex. The username must be root, and the password is passw0rd with a zero. Save your settings.

Next, you need to create and fund an account at OpenCNAM.com. Once your account is established, copy your credentials and insert them into the OpenCNAM lookup source by clicking on OpenCNAM’s tool icon :

Once you have saved the Default Scheme, then you need to enable CallerID Superfecta for each of your Inbound Routes under the Other tab in Connectivity:Inbound Routes:

Adding Hook for Inbound Call Processing. One of the decade-old shortcomings of FreePBX has always been the inability to insert dialplan code into the Inbound Call process without forever damaging your ability to add additional DIDs moving forward. While extensions_override_freepbx.conf lets you extract and manipulate large chunks of FreePBX code, the drawback is that once you do that, the flexibility provided by the GUI goes up in smoke unless you remember to always move the newly generated dialplan code back into the override context.

We much prefer a simpler way of inserting custom dialplan code into the Inbound Call processing routine, but it requires a change in the FreePBX Core module. We would caution you about using this except on Incredible PBX 13-13 servers running under CentOS 6 or 7 or Ubuntu 18.04 with Signature Checking Disabled. It will trigger nasty signature checking errors on the FreePBX Dashboard. See the next section for a workaround on generic FreePBX 13 platforms. On Incredible PBX 13 servers, login as root and issue the following commands making sure that you expand the last two lines into a single command before executing it:

cd /var/www/html/admin/modules/core
sed -i "s|new ext_noop('CallerID Entry Point')|new ext_gosub('1','s','sub-log-caller')|" \\
functions.inc.php
mysql -u root -ppassw0rd asterisk -e "update admin set value='true' \\
where variable='need_reload'"
amportal a r

Next, we need to add some supplemental dialplan code to extensions_custom.conf. This code actually populates the Asterisk Phonebook with the new call entries each time a call is received by your PBX:

cd /tmp
wget http://incrediblepbx.com/sub-log-caller.tar.gz
tar zxvf sub-log-caller.tar.gz
rm -f sub-log-caller.tar.gz
cd /etc/asterisk
cat /tmp/sub-log-caller.txt >> extensions_custom.conf
fwconsole reload
amportal restart

Disabling Module Signature Checking. If you’re running FreePBX 13 behind a secure firewall that blocks web access to FreePBX for anonymous users, then here’s a simple way that you can apply the patch above and take advantage of the sub-log-caller functionality without having to endure module signature errors within FreePBX. Simply disable Module Signature Checking. Here’s how:

cd /var/www/html/admin/libraries
sed -i 's|"SIGNATURECHECK", true|"SIGNATURECHECK", false|' modulefunctions.class.php
mysql -u root -ppassw0rd asterisk -e "UPDATE notifications SET candelete =  '1' WHERE  true;"
mysql -u root -ppassw0rd asterisk -e "DELETE FROM notifications WHERE true;"
mysql -u root -ppassw0rd asterisk -e "UPDATE freepbx_settings SET value='0' WHERE \\
keyword='SIGNATURECHECK';"
amportal restart

Adding CNAM data to CDR Listings. One of our concerns with the current CDR implementation in FreePBX is the lack of display of CNAM data for most entries in CDR listings. Currently, the only way to decipher the CNAM information is to use your mouse to hover over each of the CallerID numbers. We much prefer displaying both CallerID Name and Number in the CallerID column of CDR Reports. Here’s how to fix it:

cd /var/www/html/admin/modules/cdr
sed -i "s|cdr_formatSrc($row\['src'], $row\['clid']);|cdr_formatSrc($row\['clid'], \\
$row\['clid']);|" page.cdr.php
amportal a r

Managing Your Asterisk Phonebook. As we mentioned, there are a couple of ways to display and/or update entries in your Asterisk Phonebook that have been populated with OpenCNAM lookups. From the Asterisk CLI, you can display entries like this: database show cidname.

You also can add or update entries using the Asterisk CLI like this:

database put cidname 8431234567 "Mundy, Ward"

The simplest method to manage your Asterisk Phonebook is from within the FreePBX GUI. Simply navigate to Admin:Asterisk Phonebook. There you can edit individual entries and replace generic CNAM entries such as Atlanta, GA within something more descriptive of the caller’d identity. You also have the ability to export the data and even create speed dial entries for frequently called parties. Once Speed Dial numbers have been created, you can reach the party from any phone connected to your PBX by dialing *0 plus the speed dial number.

Finally, you need to complete some additional steps to implement the Spam Call Blocker as documented in this tutorial. Enjoy!

Originally published: Wednesday, May 30, 2018 Updated: Monday, November 26, 2018

Support Issues. With any application as sophisticated as this one, you’re bound to have questions. Blog comments are a terrible place to handle support issues although we welcome general comments about our articles and software. If you have particular support issues, we encourage you to get actively involved in the PBX in a Flash Forums. It’s the best Asterisk tech support site in the business, and it’s all free! Please have a look and post your support questions there. Unlike some forums, ours is extremely friendly and is supported by literally hundreds of Asterisk gurus and thousands of users just like you. You won’t have to wait long for an answer to your question.

Need help with Asterisk? Visit the PBX in a Flash Forum.

Special Thanks to Our Generous Sponsors

FULL DISCLOSURE: ClearlyIP, Skyetel, Vitelity, DigitalOcean, Vultr, VoIP.ms, 3CX, Sangoma, TelecomsXchange and VitalPBX have provided financial support to Nerd Vittles and our open source projects through advertising, referral revenue, and/or merchandise. As an Amazon Associate and Best Buy Affiliate, we also earn from qualifying purchases. We’ve chosen these providers not the other way around. Our decisions are based upon their corporate reputation and the quality of their offerings and pricing. Our recommendations regarding technology are reached without regard to financial compensation except in situations in which comparable products at comparable pricing are available from multiple sources. In this limited case, we support our sponsors because our sponsors support us.

BOGO Bonaza: Enjoy state-of-the-art VoIP service with a $10 credit and half-price SIP service on up to $500 of Skyetel trunking with free number porting when you fund your Skyetel account. No limits on number of simultaneous calls. Quadruple data center redundancy. $25 monthly minimum spend required. Tutorial and sign up details are here.

The lynchpin of Incredible PBX 2020 and beyond is ClearlyIP components which bring management of FreePBX modules and SIP phone integration to a level never before available with any other Asterisk distribution. And now you can configure and reconfigure your new Incredible PBX phones from the convenience of the Incredible PBX GUI.

VitalPBX is perhaps the fastest-growing PBX offering based upon Asterisk with an installed presence in more than 100 countries worldwide. VitalPBX has generously provided a customized White Label version of Incredible PBX tailored for use with all Incredible PBX and VitalPBX custom applications. Follow this link for a free test drive!

Special Thanks to Vitelity. Vitelity is now Voyant Communications and has halted new registrations for the time being. Our special thanks to Vitelity for their unwavering financial support over many years and to the many Nerd Vittles readers who continue to enjoy the benefits of their service offerings. We will keep everyone posted on further developments.

Some Recent Nerd Vittles Articles of Interest…

Dare to Compare: The Best (free) VoIP Offerings for 2018

Sunday, May 27, 2018 / 4 Comments on Dare to Compare: The Best (free) VoIP Offerings for 2018

Last week we showed you how to get 10 months of free hosting for your Incredible PBX® in the Cloud. And today we present our semi-annual survey of the latest and greatest VoIP offerings for 2018. The beauty of the cloud platform is you can try all of them for less than a penny an hour and decide for yourself which free offering best meets your needs. This year we’ve ushered in new Asterisk® 13 LTS releases of Incredible PBX® on the CentOS, Ubuntu, and Raspberry Pi platforms as well as new versions for Issabel 4 and VitalPBX. To sweeten the pot even further, we nailed down a new Cloud-based offering for $10 a year that makes a perfect VOIP sandbox for our CentOS platform. For 2018, we also secured new (free) DID offerings in the U.S. and announced a Nerd Vittles exclusive providing access to 300+ VoIP providers worldwide, all at wholesale prices. And, last but not least, we introduced Digium’s newest IP phones for Asterisk including a $59 model that makes a perfect VoIP companion.

Choosing the Best VoIP Platform for Your Needs

Choosing a VoIP platform is partially a subjective decision, but there also are some glaring red flags to consider. We suggest you begin by deciding whether your preferences include any must-have’s. Do your requirements mandate an open source solution? Do you need text-to-speech and voice recognition? Does the operating system have to be Linux-based and, if so, must it be CentOS, Debian, or Ubuntu? If you’ll be using SIP phones, must the platform include phone provisioning software for your phones, or is the ability to purchase it as an add-on sufficient? Is paid support important in making your platform decision and how much are you prepared to pay? Are automatic or pain-free software updates critical in making your selection? Is migration from an existing platform a factor? Does a preconfigured, secure firewall matter, or are you prepared to do it yourself or take your chances? Before choosing to ignore security, read this RIPS analysis of FreePBX®. Here’s a snippet from the article. Read it carefully. It’s your phone bill.

Since FreePBX is written completely in PHP, we decided to throw it into our code analysis tool RIPS. The results were more than surprising and should tell you why a rock-solid firewall is absolutely essential.

The total amount of detected vulnerabilities is very high. Luckily, the majority of the detected vulnerabilities are inside the administration control panel, such that attackers either need to steal a valid account or they have to trick an administrator into visiting a malicious website that triggers one of the critical vulnerabilities. For example, a remote command execution vulnerability could be triggered by a less critical cross-site scripting vulnerability. By chaining both vulnerabilities, the severity is increased drastically and can lead to full server compromise.

In choosing which platforms to include today, we eliminated platforms which we considered too complicated for the average new user to configure. We also eliminated any platform that did not offer at least a free tier of service with a reasonably complete feature set as part of their offering. So here’s our Pick of the Litter.

We must confess that we are partial to the Incredible PBX offerings because they provide a turnkey GPL platform with minimal configuration required on your part. Regardless of platform, all come standard with a preconfigured firewall and about three dozen applications for Asterisk that will help you learn everything there is to know about VoIP telephony.

VoIP Platform Feature Summary

Aggregation: Incredible PBX 13-13 for CentOS/SL
License: Open Source GPL
VoIP Platform: Asterisk 13
GUI: FreePBX 13 GPL modules
O/S: CentOS/SL 6.9 or 7
Phone Provisioning: Open Source
Text-to-Speech/Voice Recognition: Yes/Yes
Software Updates: Automatic Update Utility included
Migration Tools: No
Security: Fail2Ban + Preconfigured Firewall Whitelist
Security Rating (as delivered): Secure
Comments: Lean & Mean or Whole Enchilada installers as well as ISO available

Aggregation: Incredible PBX 13-13 for Raspbian
License: Open Source GPL
VoIP Platform: Asterisk 13
GUI: FreePBX 13 GPL modules
O/S: Raspbian 7
Phone Provisioning: Open Source
Text-to-Speech/Voice Recognition: Yes/Yes
Software Updates: Automatic Update Utility included
Migration Tools: No
Security: Fail2Ban + Preconfigured Firewall Whitelist
Security Rating (as delivered): Secure

Aggregation: Incredible PBX 13-13 for Ubuntu
License: Open Source GPL
VoIP Platform: Asterisk 13
GUI: FreePBX 13 GPL modules
O/S: Ubuntu 18.04
Phone Provisioning: Open Source
Text-to-Speech/Voice Recognition: Yes/Yes
Software Updates: Automatic Update Utility included
Migration Tools: No
Security: Fail2Ban + Preconfigured Firewall Whitelist
Security Rating (as delivered): Secure
Comments: Lean & Mean or Whole Enchilada installers

Aggregation: VitalPBX
License: Closed Source
VoIP Platform: Asterisk 13
GUI: Free and Commercial modules
O/S: CentOS 7
Phone Provisioning: Free
Text-to-Speech/Voice Recognition: Optional/Optional
Software Updates: Automatic
Migration Tools: Yes
Security: Fail2Ban + User-Configurable Firewall
Security Rating (as delivered): Insecure
Comments: Incredible PBX add-on now available including TM3 firewall.

Aggregation: Incredible PBX for Issabel 4
License: Open Source GPL
VoIP Platform: Asterisk 13
GUI: FreePBX 11 GPL modules
O/S: CentOS 7
Phone Provisioning: Open Source
Text-to-Speech/Voice Recognition: No/No
Software Updates: Semi-Automatic
Migration Tools: No
Security: Fail2Ban + Unconfigured Firewall
Security Rating (as delivered): Secure with Incredible PBX add-on
Comments: Incredible PBX add-on provides secure platform

Aggregation: FusionPBX for FreeSWITCH
License: Open Source MPL 1.1
VoIP Platform: FreeSWITCH 1.6
GUI: FusionPBX
O/S: Debian 8
Phone Provisioning: Free
Text-to-Speech/Voice Recognition: Optional/Optional
Software Updates: Automatic
Security: Fail2Ban + User-Configurable Firewall
Security Rating (as delivered): Secure with mods below
Comments: Incredible PBX firewall add-on now available .

Aggregation: Incredible PBX for Wazo
License: GPL3 Open Source
VoIP Platform: Asterisk 15 RealTime
GUI: Wazo GPL3 modules
O/S: Debian 9
Phone Provisioning: Extensive Open Source
Text-to-Speech/Voice Recognition: Yes/Yes
Software Updates: Automatic or 2-minute Manual
Migration Tools: No
Security: Fail2Ban + Preconfigured Firewall
Security Rating (as delivered): Secure WhiteList with Incredible PBX add-on
Comments: High Availability & Call Center GPL3 Modules

Aggregation: FreePBX Distro a.k.a. AsteriskNOW
License: Closed Source
VoIP Platform: Asterisk 13/14/15
GUI: FreePBX GPL and Commercial modules
O/S: Closed-source CentOS fork
Phone Provisioning: Open Source (minimal) or Commercial
Text-to-Speech/Voice Recognition: Optional/No
Software Updates: Manual from Hidden Repo
Migration Tools: Yes
Security: Fail2Ban + User-Configurable Firewall
Security Rating (as delivered): Insecure
Comments: Extensive commercial NagWare preinstalled

Deploying a Local Server vs. Cloud Platform

We’ve always been big fans of local servers because you have almost total control of your own destiny. This was especially true when the Raspberry Pi came along to take the financial pain out of the server equation. But the price of Cloud-based servers has continued to plummet. For 2018, you can run any of our favorites on the least expensive platform at Vultr or Digital Ocean for $2.50 a month. And, if you hurry, your first 10 months are free at Vultr. Spending another 50 cents buys you automatic backups.¹ And, for the Incredible PBX 13-13 build with CentOS 6.9 (64-bit), we’ve found a deal at HiFormance that offers a high-performance OpenVZ platform at an annual cost of just $10. The technical specs are impressive (even better if you sign up for 3 years), and we don’t think you’ll find a comparable deal with anything near comparable performance and specs anywhere, period. You get your choice of hosting sites including New York, Chicago, Los Angeles, Buffalo, Atlanta, and Dallas. Complete tutorial available here.

NOTE: OpenVZ/SolusVM platforms not suitable for CentOS 7, Debian 9, or Ubuntu 18 implementations, and some providers do not yet support Ubuntu 18.04 platform although Vultr and Digital Ocean both do.

Available Free Trunks for VoIP Servers

For many years, we’ve offered free Google Voice connectivity with our VoIP platforms. And that remains true at least for a few more weeks. On all of the Incredible PBX platforms, Google Voice trunks can be set up to make free calls in the U.S. and Canada provided you have a U.S. residence and a U.S. cellphone number to verify that you are who you say you are. There’s even a ray of hope that the Simonics gateway may allow you to continue using Google Voice after Google Voice’s mid-June drop-dead date for XMPP. Details here. But what about the rest of the world. For 2018, we solved the problem by offering free DID trunks for inbound calls and a collection of 300 wholesale VoIP carriers worldwide to make outbound calls at the same wholesale rates offered to the very largest resellers. Simply pay a 13% surcharge in lieu of the $650 annual fee, and TelecomsXchange (TCXC) will provide you access to their entire suite of wholesale carriers together with state-of-the-art tools to manage all of the services.² The Nerd Vittles setup tutorial is available here. Enjoy!

Published: Monday, March 5, 2018 Updated: Sunday, May 27, 2018

Need help with Asterisk? Visit the PBX in a Flash Forum.

Special Thanks to Our Generous Sponsors

FULL DISCLOSURE: ClearlyIP, Skyetel, Vitelity, DigitalOcean, Vultr, VoIP.ms, 3CX, Sangoma, TelecomsXchange and VitalPBX have provided financial support to Nerd Vittles and our open source projects through advertising, referral revenue, and/or merchandise. As an Amazon Associate and Best Buy Affiliate, we also earn from qualifying purchases. We’ve chosen these providers not the other way around. Our decisions are based upon their corporate reputation and the quality of their offerings and pricing. Our recommendations regarding technology are reached without regard to financial compensation except in situations in which comparable products at comparable pricing are available from multiple sources. In this limited case, we support our sponsors because our sponsors support us.

BOGO Bonaza: Enjoy state-of-the-art VoIP service with a $10 credit and half-price SIP service on up to $500 of Skyetel trunking with free number porting when you fund your Skyetel account. No limits on number of simultaneous calls. Quadruple data center redundancy. $25 monthly minimum spend required. Tutorial and sign up details are here.

The lynchpin of Incredible PBX 2020 and beyond is ClearlyIP components which bring management of FreePBX modules and SIP phone integration to a level never before available with any other Asterisk distribution. And now you can configure and reconfigure your new Incredible PBX phones from the convenience of the Incredible PBX GUI.

VitalPBX is perhaps the fastest-growing PBX offering based upon Asterisk with an installed presence in more than 100 countries worldwide. VitalPBX has generously provided a customized White Label version of Incredible PBX tailored for use with all Incredible PBX and VitalPBX custom applications. Follow this link for a free test drive!

Special Thanks to Vitelity. Vitelity is now Voyant Communications and has halted new registrations for the time being. Our special thanks to Vitelity for their unwavering financial support over many years and to the many Nerd Vittles readers who continue to enjoy the benefits of their service offerings. We will keep everyone posted on further developments.

Some Recent Nerd Vittles Articles of Interest…

On the Vultr and Digital Ocean $2.50 platforms, be sure to (1) create a 1GB swapfile once you’ve chosen your operating system. (2) Then, for Vultr, issue the following command before beginning the Incredible PBX install: apt-get install cloud-init.
(3) Now complete the steps outlined in your preferred Nerd Vittles tutorial, and you’ll be all set in about 15 minutes. [↩]
Our special thanks to TelecomsXchange. They have generously offered to contribute a portion of the wholesale surcharge to support the Incredible PBX open source project. [↩]

Cloud 9: Free Incredible PBX in the Cloud Hosting until 2019

Friday, May 25, 2018

These deals don’t come along every day so we’re interrupting our regular programming to alert you to a terrific, limited time cloud hosting offer for first-time users of Vultr. If you hurry, you can take advantage of a $25 credit on Vultr which translates into 10 free months of cloud hosting service. We can’t say enough about Vultr. They’ve been one of our key resources for development and testing of new releases of Incredible PBX for many years. Historically, they’ve supported our open source projects through generous referral revenue although that does not apply with this special offer. If you’ve always wondered whether cloud hosting was a viable alternative to on-premise solutions, now’s your chance to kick the tires at zero cost. And the other good news is you have your choice of the following Incredible PBX offerings. Simply load the required OS or upload the ISO for the platform of your choice and follow the linked tutorials below. Enjoy!

Originally published: Friday, May 25, 2018

Support Issues. With any application as sophisticated as this one, you’re bound to have questions. Blog comments are a terrible place to handle support issues although we welcome general comments about our articles and software. If you have particular support issues, we encourage you to get actively involved in the PBX in a Flash Forums. It’s the best Asterisk tech support site in the business, and it’s all free! Please have a look and post your support questions there. Unlike some forums, ours is extremely friendly and is supported by literally hundreds of Asterisk gurus and thousands of users just like you. You won’t have to wait long for an answer to your question.

Need help with Asterisk? Visit the PBX in a Flash Forum.

Special Thanks to Our Generous Sponsors

FULL DISCLOSURE: ClearlyIP, Skyetel, Vitelity, DigitalOcean, Vultr, VoIP.ms, 3CX, Sangoma, TelecomsXchange and VitalPBX have provided financial support to Nerd Vittles and our open source projects through advertising, referral revenue, and/or merchandise. As an Amazon Associate and Best Buy Affiliate, we also earn from qualifying purchases. We’ve chosen these providers not the other way around. Our decisions are based upon their corporate reputation and the quality of their offerings and pricing. Our recommendations regarding technology are reached without regard to financial compensation except in situations in which comparable products at comparable pricing are available from multiple sources. In this limited case, we support our sponsors because our sponsors support us.

BOGO Bonaza: Enjoy state-of-the-art VoIP service with a $10 credit and half-price SIP service on up to $500 of Skyetel trunking with free number porting when you fund your Skyetel account. No limits on number of simultaneous calls. Quadruple data center redundancy. $25 monthly minimum spend required. Tutorial and sign up details are here.

The lynchpin of Incredible PBX 2020 and beyond is ClearlyIP components which bring management of FreePBX modules and SIP phone integration to a level never before available with any other Asterisk distribution. And now you can configure and reconfigure your new Incredible PBX phones from the convenience of the Incredible PBX GUI.

VitalPBX is perhaps the fastest-growing PBX offering based upon Asterisk with an installed presence in more than 100 countries worldwide. VitalPBX has generously provided a customized White Label version of Incredible PBX tailored for use with all Incredible PBX and VitalPBX custom applications. Follow this link for a free test drive!

Special Thanks to Vitelity. Vitelity is now Voyant Communications and has halted new registrations for the time being. Our special thanks to Vitelity for their unwavering financial support over many years and to the many Nerd Vittles readers who continue to enjoy the benefits of their service offerings. We will keep everyone posted on further developments.

Some Recent Nerd Vittles Articles of Interest…

Creating an OBi200 Google Voice Trunk to Use with Asterisk

Monday, May 14, 2018 / 6 Comments on Creating an OBi200 Google Voice Trunk to Use with Asterisk

Since Asterisk® will no longer be able to "talk" to Google Voice after June 17, we promised to hold our nose and document how to salvage your Google Voice trunks. Our exercise for today is to show you how to deploy an OBi 200-series device which can speak the new Google Voice language and use it as a traditional SIP bridge between Google Voice’s proprietary SIP platform and your Asterisk server. We will skip the editorializing on why Google is making a terrible mistake by discarding XMPP and forcing users to a proprietary solution necessitating a hardware purchase without first offering an open standards solution as Google’s Community Manager promised here. Promises, of course, don’t keep your phones ringing. For the whole story, see our article from last Saturday. For today, you’ll need to shell out $50 for an OBi 200 device. Once you have it in hand, feel free to read on and we’ll get you back in business. For security reasons, it should be noted that today’s setup assumes you are running an Incredible PBX® server and OBi device locally behind a NAT-based router. This will work equally well with the Incredible PBX-enhanced versions of Issabel and VitalPBX. We’ll leave it to the FreePBX® folks to figure out a solution for their proprietary distro.

Everything we’re covering below will work just as well using any of the OBi 200-series devices. We’ve simply chosen to use an OBi202 in our examples today because it supports an extra phone port. But an OBi200 works just as well if you will only be deploying Google Voice trunks (up to 3 and perhaps more) for your PBX. They retail for approximately $50 and are readily available at Amazon through the link in the right column which also provides a few shekels for Nerd Vittles to keep the lights on. As mentioned last week, Obihai crippled the OBi 110-series devices which will no longer work with the new Google Voice setup. Such a fine company that we once praised for producing our Device of the Year. And don’t worry. If you ever visit their forum, you can expect a cheery reception from the Obihai forum moderator. Here’s the response we got¹ when raising concerns about the demise of Google Voice XMPP:

Registering Your OBi2x Device with OBiTALK

A Quick Start Guide accompanies your OBi hardware. Following along in the tutorial will get your OBi set up using a free (so far) OBiTALK account. When you get to Step 5, you’ll be ready to set up your Google Voice account by clicking the Google Voice Set-Up button.

Before you begin the Google Voice setup, we strongly recommend that you plug a POTS phone into your OBi device and dial ***6 to update your firmware to the latest release. Depending upon where you purchased your device, it may or may not have the latest firmware which is required to communicate with Google Voice on or after June 17.

We also recommend that you dial ***1 and obtain the DHCP-assigned IP address for your OBi. You’ll need this in a few minutes. And, while you’re at it, be sure to set the OBi up behind a NAT-based router to protect it from intrusion. Once someone gains access to your OBi, they’ve essentially got the keys to your telecom castle. So always deploy an OBi behind a hardware-based firewall that is on the same private LAN as your Asterisk PBX. Finally, on your router, be sure to reserve the DHCP-assigned IP address of your OBi for permanent use by the OBi hardware. Otherwise, the IP address of your OBi may change, and this will break the SIP gateway connection to your Asterisk server.

Finally, a word about the new OBi setup. All of your settings are now stored and managed in the OBiTALK cloud. Obihai then pushes the configuration to your OBi device. To put it charitably, this usually works but sometimes it doesn’t, and you end up with a quirky OBi setup that looks correct in the cloud but simply doesn’t work. We’ve found the simplest solution is to unplug the device and then restart it. Then check all of your cloud-based settings when the OBi device comes back to life to be sure none of your settings disappeared. Sometimes they do! In the old days, you had the option of configuring your OBi device locally; however, Obihai (now Polycom) has disabled that functionality with the new Google Voice setup presumably to disguise what they are doing under the covers to connect to Google.

Configuring a Google Voice Trunk on OBi200

To give credit where credit is due, configuring a Google Voice trunk on the OBi 200-series devices is dead simple. Login into your OBiTALK account, click on your OBi device, and then click the Google Voice Set-Up button.

Enter your Google Voice credentials when prompted, give Obihai permission to control your Google Voice account, and you’re done. Within a few seconds, the connections dialog box should show Google Voice connected on service provider SP1.

If you haven’t already done so, plug a POTS phone into your OBi device and place a call to somebody by dialing a 10-digit number. Then use another phone and call the Google Voice number you assigned to your OBi device. The POTS phone should ring. Don’t continue until you get these calls working in both directions. You’d be wasting your time.

Now we need to adjust the destination for incoming calls to your OBi device and redirect them from the POTS phone to the SP3 trunk we’ll be using to connect to your Asterisk server. We’ll leave SP2 unoccupied in case you wish to add another Google Voice trunk down the road.

To make this change, click the OBi Expert Configuration button at the bottom of the Device Configuration window. Then click OK to confirm that you know what you’re doing. Next click the Enter OBi Expert button at the top of the next form. In the left column, click Voice Services and then SP1 Service. The fifth parameter is called X_InboundCallRoute. Beside it, uncheck both the OBiTALK Settings and Device Default checkboxes. Now enter sp3(6781234567) in the Value field for X_InboundCallRoute where 6781234567 is your actual Google Voice phone number (DID). Scroll to the bottom and click the Submit button.

Finally, at the top of the left column of the form, click Return to OBi Dashboard.

Configuring OBi SIP Trunk for Asterisk

1. Login to your OBi Dashboard using a web browser . After signing up for an account and registering your OBi device, click on the OBi 200 device in the My OBi Devices list.

2. In the Device Configuration dialog, click OBi Expert Configuration button. When prompted whether you’re sure, click OK.

3. In the OBi Expert Configuration Menu, click Enter OBi Expert button.

4. In the Production Information (left) column, click Service Providers.

5. In the Service Providers listing, click ITSP Profile C General.

6. For each of these fields, uncheck OBiTALK Settings and then uncheck Device Default:

General:Name
Service Provider Info:Name
Service Provider Info:URL

7. Fill in the ! field Values as shown below using the private IP address of your PBX:

8. Click Submit button after checking your entries carefully.

9. In the Service Providers listing on the left, click ITSP Profile C SIP.

10. In the ITSP Profile, enter the private IP address of your PBX in the Proxy Server, Registrar Server, and Outbound Proxy fields after first unchecking both the OBiTALK Settings and Device Default checkboxes.

11. Scroll down the form to X_SpoofCallerID and uncheck both the OBiTALK Settings and Device Default checkboxes. Then check the Value field for X_SpoofCallerID.

12. Scroll down the form to X_DiscoverPublicAddress and uncheck both the OBiTALK Settings and Device Default checkboxes. Then uncheck the Value field for X_Discover PublicAddress.

13. Click Submit button after checking your entries beside the 5 red exclamation points.

14. In the Production Information (left) column, click Voice Services

15. In the Voice Services listing on the left, click SP3 Service.

16. In the SP3 Service Profile, fill in the 5 fields in which the OBiTALK Settings checkbox is unchecked. The AuthUsername and AuthPassword entries will be used to authenticate to your PBX so be sure to choose a very secure password. It’s your phone bill. The URI field actually makes the trunk connection to your PBX so replace the 192.168.0.82 entry shown with the actual IP address of your PBX.

17. In the SIP Credentials section of the form, make certain that X_EnforceRequestUserID is unchecked. If not, uncheck both the OBiTALK Settings and Device Default checkboxes and then uncheck X_EnforceRequestUserID.

18. If you do not want to pass the CallerID number with your calls, in the Calling Features section of the form, be sure to check AnonymousCallEnable after unchecking both the OBiTALK Settings and Device Default checkboxes.

19. In the Service Providers listing on the left, click ITSP Profile A SIP.

20. Be sure X_SpoofCallerID is checked.

21. Click Submit button after checking your entries carefully.

Configuring Incredible PBX GUI for an OBi200

On the Incredible PBX side, log into the GUI using a web browser. We’ll be adding a SIP trunk, an outbound route, and an inbound route to process calls to and from the OBi device.

Add a SIP Trunk with a Trunk Name matching whatever you used in your OBi SIP credentials, e.g. obi200 or obi202. Plug in your Outbound CallerID to match your Google Voice phone number. In the Dialed Number Manipulation Rules tab, add a Match Pattern of NXXNXXXXXX. In the SIP Settings tab for Outgoing, the Trunk Name should match whatever you used on the OBi side, e.g. obi200 or obi202. In the PEER DETAILS, enter the following using the default username and password you assigned on the OBi side. Normally, port 5061 is the default port assigned on the OBi side. If you get a failed registration, try 5060 and then 5062 and 5063. Click Submit and reload your dialplan when finished.

type=friend
defaultuser=obi200
secret=your-password
qualify=yes
port=5061
nat=yes
host=dynamic
dtmfmode=rfc2833
disallow=all
context=from-trunk
canreinvite=no
allow=ulaw
insecure=port,invite

For Outbound Call Routing, we recommend an Outbound Route using the 624 (OBI) prefix and 10-digit numbers. For example, if a user dials 624-888-1234567, your Incredible PBX server would place a call using the OBi’s Google Voice trunk to 1-888-1234567. When your Outbound Route setup looks like the following, click Submit and reload your dialplan.

For Inbound Call Routing, create an Inbound Route specifying a DID Number to match your Google Voice number. Choose a Call Destination to meet your own requirements, e.g. an extension, ring group, or IVR. Then click Submit and reload your dialplan.

Now you’re ready to test an outgoing call by dialing the OBi prefix (624) plus a 10-digit number. Then place a call to your Google Voice number using your cellphone and be sure Asterisk routes it to the destination you specified in your inbound route above.

Configuring VitalPBX to Use an OBi200

Truth be told, we weren’t bright enough to figure out how to configure the VitalPBX Trunk using credentials so we simply set up the SIP trunk using IP address authentication with the IP address of the OBi device. It works just as well and just goes to prove there’s always more than one way to skin a cat. So here’s the Trunk configuration on the VitalPBX side. The only entry you will need to change is the Host IP address for your OBi device. If you don’t know it, plug a phone into the OBi and dial ***1.

NOTE: For the Username and Description fields below, be sure to match what you used on the OBi side (above) for your SIP credentials, i.e. obi200 or obi202. If they don’t match on both devices, you won’t get a successful connection. Our apologies for mixing apples and oranges in the screenshots.

For Outbound Call Routing, we recommend an Outbound Route using the 624 (OBI) prefix and 10-digit numbers. For example, if a user dials 624-888-1234567, the VitalPBX server would place a call using the OBi’s Google Voice trunk to 1-888-1234567. Here’s the Outbound Route setup to make that happen:

For Inbound Call Routing, go to PBX:External:Inbound Routes and add an inbound route and destination for calls from your 10-digit Google Voice number. Or you can use the Default Inbound Route which we explained in our previous VitalPBX tutorial. Basically, you set up an Inbound Route with a Description and Routing Method of Default. All the other fields should be left as is except for the Inbound Destination. For the destination, you can choose an IVR, Extension, Ring Group, etc. to meet your own requirements.

Originally published: Monday, May 14, 2018

Support Issues. With any application as sophisticated as this one, you’re bound to have questions. Blog comments are a difficult place to address support issues although we welcome general comments about our articles and software. If you have particular support issues, we encourage you to get actively involved in the PBX in a Flash Forum. It’s the best Asterisk tech support site in the business, and it’s all free! Please have a look and post your support questions there. Unlike some forums, the PIAF Forum is extremely friendly and is supported by literally hundreds of Asterisk gurus and thousands of users just like you. You won’t have to wait long for an answer to your question.

SPECIAL TREAT: If you could use one or more free DIDs in the U.S. with unlimited inbound calls and unlimited simultaneous channels, then today’s your lucky day. TelecomsXChange and Bluebird Communications have a few hundred thousand DIDs to give away so you better hurry. You have your choice of DID locations including New York, New Jersey, California, Texas, and Iowa. The DIDs support Voice, Fax, Video, and even Text Messaging (by request). The only requirement at your end is a dedicated IP address for your VoIP server. Once you receive your welcome email with your number, be sure to whitelist the provider’s IP address in your firewall. For Incredible PBX servers, use add-ip to whitelist the UDP SIP port, 5060, using the IP address provided in your welcoming email.

Here’s the link to order your DIDs.

Your DID Trunk Setup in your favorite GUI should look like this:

Trunk Name: IPC
Peer Details:
type=friend
qualify=yes
host={IP address provided in welcome email}
context=from-trunk

Your Inbound Route should specify the 10-digit DID. Enjoy!

Need help with Asterisk? Visit the PBX in a Flash Forum.

Special Thanks to Our Generous Sponsors

FULL DISCLOSURE: ClearlyIP, Skyetel, Vitelity, DigitalOcean, Vultr, VoIP.ms, 3CX, Sangoma, TelecomsXchange and VitalPBX have provided financial support to Nerd Vittles and our open source projects through advertising, referral revenue, and/or merchandise. As an Amazon Associate and Best Buy Affiliate, we also earn from qualifying purchases. We’ve chosen these providers not the other way around. Our decisions are based upon their corporate reputation and the quality of their offerings and pricing. Our recommendations regarding technology are reached without regard to financial compensation except in situations in which comparable products at comparable pricing are available from multiple sources. In this limited case, we support our sponsors because our sponsors support us.

BOGO Bonaza: Enjoy state-of-the-art VoIP service with a $10 credit and half-price SIP service on up to $500 of Skyetel trunking with free number porting when you fund your Skyetel account. No limits on number of simultaneous calls. Quadruple data center redundancy. $25 monthly minimum spend required. Tutorial and sign up details are here.

The lynchpin of Incredible PBX 2020 and beyond is ClearlyIP components which bring management of FreePBX modules and SIP phone integration to a level never before available with any other Asterisk distribution. And now you can configure and reconfigure your new Incredible PBX phones from the convenience of the Incredible PBX GUI.

VitalPBX is perhaps the fastest-growing PBX offering based upon Asterisk with an installed presence in more than 100 countries worldwide. VitalPBX has generously provided a customized White Label version of Incredible PBX tailored for use with all Incredible PBX and VitalPBX custom applications. Follow this link for a free test drive!

Special Thanks to Vitelity. Vitelity is now Voyant Communications and has halted new registrations for the time being. Our special thanks to Vitelity for their unwavering financial support over many years and to the many Nerd Vittles readers who continue to enjoy the benefits of their service offerings. We will keep everyone posted on further developments.

You can always find a little humor in insults if you dig deep enough. Ironically and unbeknownst to our pal, Steve, it was Sherman Scholten and his OBi development team that were among the first Google Voice "freeloaders." Only years later after Google Voice was integrated into FreeSwitch did Josh Culp at Digium perfect a clean way to integrate Google Voice into the Asterisk platform. [↩]

An Open Letter to Google: Don’t Do It!

Saturday, May 12, 2018 / 9 Comments on An Open Letter to Google: Don’t Do It!

With an obscure post on its support forum, Google has quietly announced that it will discontinue Google Voice support for XMPP on June 18. According to Obihai¹ insiders, it will be replaced with a Google-proprietary version of the SIP protocol to which only Obihai has been provided access despite claims from Google staff (without documentation) that the "new Google Voice" will be "standards-compliant" and "should work with many third party solutions."

July 20 Update: Google did it anyway and pulled the plug on their XMPP implementation of Google Voice. See this Nerd Vittles tutorial for the latest fixes for Asterisk without purchasing any new hardware.

If you loved New Coke, this should be a hit. You may recall that Google has attempted similar switcharoos previously only to retreat at the last moment and continue support for "Legacy Google Voice" a.k.a. Google Chat which works with Asterisk® and currently looks like this:

If you happen to have an Obi 200 series device and revisit the same Google Voice Legacy Settings dialog today, what you will now see looks something like this. In addition to the disappearance of the Google Chat option, note the proprietary FQDN in the SIP URI as well as the MAC address accompanying the specific OBi hardware device designation. That’s three clear indicators that this new "service" was engineered to be anything but open.

The important point here is that all existing Google Voice XMPP connections through Asterisk, pygooglevoice, 3CX, OBi 100-series devices, and the Simonics SIP/GV gateway will fail beginning June 18. In its place, we get a new (proprietary) monopoly courtesy of Google and Obihai/Polycom. Can this change? Of course. What are the chances? Not likely. They’re already rolling it out to OBi hardware. And, if you happen to be one of the millions of Asterisk users that has depended upon Google Voice for communications, too bad for you. In fact, when we posted comments on both the Google Voice and Obihai forums warning of the upheaval this would cause in the VoIP community, both comments were promptly removed. So much for transparency and standards compliance. Wouldn’t you think Google would have the decency to at least alert Google Voice users through their registered email addresses that the service was being discontinued after users have relied upon it for almost ten years? Apparently not. A SIP FQDN that begins with a corporate name is not a good sign. It’s anything but standards-compliant. Quoting one of the OBi shills, "Google isn’t obligated to support anything else." And then there’s this from a moderator on the Google Forum:

So where do we go from here? There are several options. None of them are particularly appealing. First, you can port out your Google Voice number to another provider. You’ve got about five weeks to get it done. Second, you can continue to use the existing Google Voice Settings menu (so far) to forward incoming calls to a DID or phone number that you already own. What you lose is the ability to make outbound calls using that Google Voice trunk. Third, you can purchase an OBi 200-series ATA and set up a SIP trunk to process calls from the OBi200 in much the same way that you do today. Aside from the $50 bounty, the only other wrinkle that we’ve found is that FreePBX® currently does not support DIDs of over 50 characters (as are used with the new GV DIDs) so you will need to configure a default inbound route to process incoming calls from your OBi devices or apply the patch that we’ll provide for Incredible PBX® platforms. It should also work with generic FreePBX setups.

We have mixed emotions about documenting this OBi 200-series trunk setup. Other sites have pulled their tutorials arguing that we should boycott Polycom and Obihai devices as well as Google Voice until Google cleans up its act. After all, Polycom has worked with Google for months to design and build this new proprietary setup. It wasn’t an accident. On the other hand, we have championed Google Voice since its inception, and thousands of our followers depend upon Google Voice for their production PBXs. So we’re holding our nose in documenting the setup here. In the meantime, we hope each of you will write and post scathing comments about Google Voice and publish them widely. Do it today! Bad publicity is probably the only thing that will prompt Google to change directions at this juncture.

Continue Reading: Creating an OBi200 Google Voice Trunk to Use with Asterisk

Originally published: Saturday, May 12, 2018

In case you didn’t know, Obihai recently sold out to Polycom. [↩]

VoiceMail Transcription for VitalPBX Using IBM Watson STT

Monday, April 23, 2018 / 2 Comments on VoiceMail Transcription for VitalPBX Using IBM Watson STT

Our VitalPBX adventure resumes today with one of the most requested PBX features regardless of platform. VoiceMail Transcription simply means that recorded voicemail messages are transcribed using a speech-to-text (STT) engine before being delivered in both written and recorded formats via email. The good news is we’ll show you how to harness IBM Watson’s STT to do the heavy lifting. Their platform is hands-down the best in the industry. And today we’ll walk you through the 5-minute setup procedure for your VitalPBX server.

IBM Watson’s STT solution is a real game-changer for one simple reason. Their STT API performs more accurately than any speech recognition engine in the world. As an added bonus, you won’t have to worry about Google breaking our middleware every month. On the standard plan, voicemail transcription is 2 cents per minute, or you can opt for the LITE plan which provides 100 free minutes every month. It’s worth noting that IBM doesn’t round up minutes. Transcribing two 30-second messages counts as one minute.

https://youtu.be/JWnLgZ58zsw

Obtaining IBM Watson STT Credentials

NOV. 1 UPDATE: IBM has moved the goal posts effective December 1, 2018:

If you’ve already installed the Incredible PBX add-on for VitalPBX, then IBM Watson STT already is in place. All you need is your STT (not TTS) credentials. If you haven’t installed the Incredible PBX add-on, you have two choices to get started. You can either install the Incredible PBX Custom Context now, or you can skip Incredible PBX and set up an IBM Watson account and obtain STT credentials. So start there and write down your STT credentials. You’ll need them in a minute.

Outgoing SMTP Email Setup

You obviously can’t receive voicemail messages by email if your server can’t send emails. So the next step is to configure VitalPBX to assure reliable delivery of outbound email. We strongly recommend using a Gmail account for email relay for the simple reason that many ISPs (such as Comcast) block downstream SMTP mail messages. By using Gmail as a relay host for messages sent from VitalPBX, you avoid the problem. Here’s a simple test to determine whether your server can send emails reliably. Just substitute your email address for yourname@your-email-domain.com.

echo "test" | mail -s testmessage yourname@your-email-domain.com

To configure Gmail as an SMTP relay on your VitalPBX server, login to the GUI and go to Admin:System Settings:Email Settings. Click Use External Mail Server in the Server options. Choose Gmail as the Provider. Insert the From Address to match your Gmail account name. And then enter your Gmail credentials. If you use two-step authentication with your Gmail account, you’ll first need to Obtain an Application Password to use in lieu of your regular Gmail password. Once you’ve completed all of the entries, Save your settings and Reload the Dialplan when prompted. Then send yourself a test email using the fields provided. Don’t proceed until you get this working reliably.

Installing VitalPBX Voice Recognition Engine

1. After logging into your VitalPBX server as root using SSH/Putty:

cd /
wget http://incrediblepbx.com/sendmailibm-vitalpbx.tar.gz
tar zxvf sendmailibm-vitalpbx.tar.gz
rm -f sendmailibm-vitalpbx.tar.gz

2. Now restart Asterisk core services: asterisk -rx "core reload"

3. Edit /usr/sbin/sendmailibm and insert your IBM Watson STT credentials on lines 30 and 31. Change the language on line 34 if you don’t want en-US. Then save the file. NOTE: For new deployments, your API Username should be apikey. And your API Password will be your actual APIkey.

4. Log back into the VitalPBX GUI and configure the extensions desired for email delivery of voicemail. In PBX:Extensions:General, enter an Email Address for each extension. In PBX:Extensions:Voicemail, enter the following data using the password and timezone for each extension. Don’t enable the Delete tab until you have first tested things out.

5. If you’re using Google Voice trunks with an inbound route connecting to one or more extensions, you’ll also need to adjust the Ring Time for incoming calls, or Google Voice’s voicemail may pick up the calls before VitalPBX does. You’ll find the Ring Time setting in PBX:Extensions:Advanced for each extension. We’ve found that 20 seconds works reliably.

Originally published: Monday, April 23, 2018

Got Friends? 7 Countries Have Never Visited Nerd Vittles. 2018 Is Calling! https://t.co/wMfmlhAr16 #asterisk #freepbx #wazo #issabel #IncrediblePBX #3CX pic.twitter.com/kAmAEnwVIw

— Ward Mundy (@NerdUno) January 9, 2018

Need help with VitalPBX? Visit the VitalPBX Forum.

Sad Day. Today we say goodbye to an old friend. Feedjit has been an informative piece in the Nerd Vittles landscape for many years providing a real-time snapshot of the location of our site’s visitors and what they were reading. The following was posted on their web site today: "Due to emerging cyber risks and regulatory requirements, it is not possible to continue to operate Feedjit as a not-for-profit fun service without incurring significant costs. For this reason we are regrettably shutting down the service." We want to join the multitudes who have thanked Mark Maunder and his partner, Kerry, for their tireless efforts in providing this incredible service. We, of course, hope they will reconsider even if it means converting the site into a commercial endeavor. It was a one-of-a-kind offering that will be sorely missed in the blogosphere.

Special Thanks to Our Generous Sponsors

FULL DISCLOSURE: ClearlyIP, Skyetel, Vitelity, DigitalOcean, Vultr, VoIP.ms, 3CX, Sangoma, TelecomsXchange and VitalPBX have provided financial support to Nerd Vittles and our open source projects through advertising, referral revenue, and/or merchandise. As an Amazon Associate and Best Buy Affiliate, we also earn from qualifying purchases. We’ve chosen these providers not the other way around. Our decisions are based upon their corporate reputation and the quality of their offerings and pricing. Our recommendations regarding technology are reached without regard to financial compensation except in situations in which comparable products at comparable pricing are available from multiple sources. In this limited case, we support our sponsors because our sponsors support us.

BOGO Bonaza: Enjoy state-of-the-art VoIP service with a $10 credit and half-price SIP service on up to $500 of Skyetel trunking with free number porting when you fund your Skyetel account. No limits on number of simultaneous calls. Quadruple data center redundancy. $25 monthly minimum spend required. Tutorial and sign up details are here.

The lynchpin of Incredible PBX 2020 and beyond is ClearlyIP components which bring management of FreePBX modules and SIP phone integration to a level never before available with any other Asterisk distribution. And now you can configure and reconfigure your new Incredible PBX phones from the convenience of the Incredible PBX GUI.

VitalPBX is perhaps the fastest-growing PBX offering based upon Asterisk with an installed presence in more than 100 countries worldwide. VitalPBX has generously provided a customized White Label version of Incredible PBX tailored for use with all Incredible PBX and VitalPBX custom applications. Follow this link for a free test drive!

Special Thanks to Vitelity. Vitelity is now Voyant Communications and has halted new registrations for the time being. Our special thanks to Vitelity for their unwavering financial support over many years and to the many Nerd Vittles readers who continue to enjoy the benefits of their service offerings. We will keep everyone posted on further developments.

Incredible PBX in the Cloud: A $10/Year VoIP Cloud Platform

Monday, April 16, 2018 / 3 Comments on Incredible PBX in the Cloud: A $10/Year VoIP Cloud Platform

We’ve been inching toward a new low-cost plateau for VoIP cloud providers, and today we have a new milestone that finally makes running VoIP servers out of your home or office look like the horse-and-buggy days. $10 a year now buys you a cloud platform that is less expensive than the cost of electricity to run a server on premise. You get 2GB of RAM, 20GB of SSD storage, two virtual core processors, and 2TB of monthly bandwidth. If you prepay for 3 years, you can double either the RAM or SSD storage by simply opening a ticket after you sign up. It’s a near perfect platform for Incredible PBX 13-13 with CentOS 6.9. Add a Google Voice trunk and you get unlimited calling in the U.S. and Canada combined with a feature set that you’ll be hard-pressed to find on any PBX at any price. Putting all the pieces in place is about as simple as preparing slice-and-bake cookies, and you’ll be up and running before the cookies come out of the oven. Skip that hamburger lunch and come join the VoIP revolution!

So what’s the catch? Well, there’s no catch with Incredible PBX 13-13 and CentOS 6.9. But this HiFormance platform uses OpenVZ with SolusVM, and SolusVM has some serious bugs with their CentOS 7 and Debian 9 implementations. That rules out using VitalPBX, Issabel, or Wazo. Someone always asks, "If the platform is so great, why aren’t you using it?" And our answer is we are. We have deployed HiFormance cloud-based VoIP servers running Incredible PBX 13-13 in Atlanta, Buffalo, Chicago, and Los Angeles without any hiccups in service. Performance is excellent. Support is excellent. So run, don’t walk, to sign up for one of these before they’re all gone. You won’t be disappointed. Just fill out the entries as shown above once you log into the HiFormance site. Nerd Vittles receives no commissions from signups.

Getting Started with Incredible PBX 13-13

Once your virtual machine is up and running with CentOS 6.9, log into your server as root and issue the following commands to get started. Use the first command to immediately change your root password. Then you’ll be ready to begin the Incredible PBX install. It’s a two-step process. First, the installer will bring your version of CentOS up to current specs and load the necessary packages to support Asterisk® and FreePBX®. The first stage takes 22 minutes.

passwd
cd /root
yum -y update
yum -y install net-tools nano wget tar
wget http://incrediblepbx.com/incrediblepbx-13-13-LEAN.tar.gz
tar zxvf incrediblepbx-13-13-LEAN.tar.gz
rm -f incrediblepbx-13-13-LEAN.tar.gz
./IncrediblePBX-13-13.sh

When the base install finishes, your server will reboot. Simply log back in as root and run the installer a second time. Be sure your console window is at least 80 x 28, or the install will fail. If in doubt, expand it to full screen. You’ll be prompted whether to implement Google Voice plain text or OAuth 2 passwords.¹ OAuth is strongly recommended. In fact, OAuth is required if you wish to install the Whole Enchilada upgrade which gets you several dozen preconfigured applications for Asterisk. Make your selection, and the installer will work its magic. Return in 12 minutes.

./IncrediblePBX-13-13.sh

Reboot one final time when the installer finishes the setup, and Incredible PBX LEAN will be ready to go. Log back in as root. This will kick off the Automatic Update Utility to load any last minute additions, bug fixes, and security patches. After the status menu displays, run the following apps to set a very secure admin password for web access to the GUI and to choose your default time zone:

/root/admin-pw-change
/root/timezone-setup

One of the unique features of Incredible PBX 13-13 is that most of the major components of the aggregation including Asterisk are compiled from source code on the fly. This has several advantages. First, you always get the latest version of the source code. And, second, the source code is available on your server so that you can make any future modifications desired to meet your own unique requirements. You won’t find this in any other VoIP implementation. It’s one of the reasons Incredible PBX takes a bit longer to install than many of the canned offerings that rely upon precompiled packages that are difficult to modify.

WebMin is also installed and configured as part of the base install. The root password for access is the same as your Linux root password. We strongly recommend that you not use WebMin to make configuration changes to your server. You may inadvertently damage the operation of your PBX beyond repair. WebMin is an excellent tool to LOOK at how your server is configured. When used for that purpose, we highly recommend WebMin as a way to become familiar with your Linux configuration.

Using the Incredible PBX 13-13 Web GUI

Most of the configuration of your PBX will be performed using the web-based Incredible PBX GUI with its FreePBX 13 GPL modules. Use a browser pointed to the IP address of your server and choose Incredible PBX Admin. Log in as admin with the password you configured in the previous step. HINT: You can always change it if you happen to forget it. You can safely ignore the warning about a missing swap file. You have plenty of RAM, and OpenVZ platforms don’t permit swap files. If you’re worried about it, choose the 3-year prepayment option and double your ram from 2GB to 4GB which is more than ample for even the busiest PBXs.

NOTE: If you plan to upgrade to the Whole Enchilada, you can skip the rest of this section. It’s for those that wish to roll their own PBX from the ground up.

To get a basic system set up so that you can make and receive calls, you’ll need to add a VoIP trunk, create one or more extensions, set up an inbound route to send incoming calls to an extension, and set up an outbound route to send calls placed from your extension to a VoIP trunk that connects to telephones in the real world. You’ll also need a SIP phone or softphone to use as an extension on your PBX. Our previous tutorial will walk you through this setup procedure. Over the years, we’ve built a number of command line utilities including a script to preconfigure SIP trunks for more than a dozen providers in seconds. You’ll find links to all of them here.

Continue Reading: Configuring Extensions, Trunks & Routes

Reconfiguring PortKnocker for OpenVZ

By default, PortKnocker monitors activity on eth0. Most OpenVZ platforms including HiFormance use venet0:0 as the default Ethernet port. Issue the following commands to get PortKnocker up and running. Then pbxstatus should show PortKnocker working.

echo 'OPTIONS="-i venet0:0"' >> /etc/sysconfig/knockd
service knockd restart
pbxstatus

Reconfiguring NeoRouter VPN for OpenVZ

On OpenVZ platforms including HiFormance, you’ll need to enable TUN/TAP in the Control Panel for your VPS. After adjusting the setting, reboot your server. Then the NeoRouter VPN client will function properly.

Upgrading to Incredible PBX Whole Enchilada

There now are two more pieces to put in place. The sequence matters! Be sure to upgrade to the Whole Enchilada before you install Incredible Fax. If you perform the steps backwards, you may irreparably damage your fax setup by overwriting parts of it.

The Whole Enchilada upgrade script now is included in the Incredible PBX LEAN tarball. Upgrading to the Whole Enchilada is simple. Log into your server as root and issue the following commands. Be advised that this upgrade will overwrite all of your existing Incredible PBX setup including any extensions, trunks, and routes you may have created previously. You also will be prompted to reset all of your passwords as part of the upgrade. Install time: 2 minutes.

cd /root
./Enchilada*

If you accidentally installed Incredible Fax before upgrading to the Whole Enchilada, you may be able to recover your Incredible Fax setup by executing the following commands. It’s worth a try anyway.

amportal a ma install avantfax
amportal a r

Installing Incredible Fax with HylaFax/AvantFax

You don’t need to upgrade to the Whole Enchilada in order to use Incredible Fax; however, you may forfeit the opportunity to later upgrade to the Whole Enchilada if you install Incredible Fax first. But the choice is completely up to you. To install Incredible Fax, log into your server as root and issue the following commands. Install time: 2 minutes.

cd /root
./incrediblefax13.sh

After entering your email address to receive incoming faxes, you’ll be prompted about two dozen times to choose options as part of the install. Simple press the ENTER key at each prompt and accept all of the defaults. When the install finishes, make certain that you reboot your server to bring Incredible Fax on line. There will be a new AvantFax option in the Incredible PBX GUI. The default credentials for AvantFax GUI are admin:password; however, you first will be prompted for your Apache admin credentials which were set when you installed Incredible PBX 13-13 LEAN or the Whole Enchilada. Then you’ll be asked to change your AvantFax password.

Upgrading to IBM Speech Engines

NOV. 1 UPDATE: IBM has moved the goal posts effective December 1, 2018:

If you’ve endured Google’s Death by a Thousand Cuts with text-to-speech (TTS) and voice recognition (STT) over the years, then we don’t have to tell you what a welcome addition IBM’s new speech utilities are. We can’t say enough good things about the new IBM Watson TTS and STT offerings. While IBM’s services are not free, that’s really theoretical for most of our readers. Your first month on the platform is entirely free. And, after that, you get 1,000 minutes a month of free STT voice recognition services. And the first million characters of text-to-speech synthesis are FREE every month as well. So let’s put the pieces in place so you’ll be ready to play with the Whole Enchilada. Here’s our tutorial that will walk you through the one-time IBM setup.

Next, login to your Incredible PBX server and issue these commands to update your Asterisk dialplan and edit ibmtts.php:

cd /var/lib/asterisk/agi-bin
./install-ibmtts-dialplan.sh
nano -w ibmtts.php

Insert your credentials in $IBM_username and $IBM_password. Verify that $IBM_url matches the entry provided when you registered with IBM. Then save the file: Ctrl-X, Y, then ENTER. Now reload the Asterisk dialplan: asterisk -rx "dialplan reload". Try things out by dialing 951 (news) or 947 (Weather) from an extension registered on your PBX.

To get IBM’s Speech to Text service configured, while still logged in to your Incredible PBX server, issue these commands to edit getnumber.sh:

cd /var/lib/asterisk/agi-bin
nano -w getnumber.sh

Insert your API_USERNAME and API_PASSWORD in the fields provided. Then save the file: Ctrl-X, Y, then ENTER. Update your Voice Dialer (411) to use the new IBM STT service:

sed -i '\\:// BEGIN Call by Name:,\\:// END Call by Name:d' /etc/asterisk/extensions_custom.conf
sed -i '/\\[from-internal-custom\]/r ibm-411.txt' /etc/asterisk/extensions_custom.conf
asterisk -rx "dialplan reload"

Now try out the Incredible PBX Voice Dialer with AsteriDex by dialing 411 and saying "Delta Airlines." Check back next week for the Whole Enchilada apps tutorial.

Configuring Google Voice with Incredible PBX

The advantage of Google Voice trunks for those of you in the United States is that all of your calls within the U.S. and Canada are free. You can’t beat the price, and it has worked reliably for many, many years. There are three different ways to set up Google Voice trunks with Incredible PBX. For a one-time fee of $4.99 with this coupon, you can use the Simonics GV/SIP gateway to configure a Google Voice account using OAuth 2 authentication. Then just set up the Simonics SIP trunk on your PBX to point to the Simonics gateway. A second option is to choose the (recommended) OAuth 2 authentication method for Google Voice when you initially install Incredible PBX 13-13. Finally, you can choose plain-text passwords for Google Voice when you set up Incredible PBX. The drawback of this last option is Google has hinted that they may discontinue support of plain-text passwords.

Here are the initial setup steps on the Google side:

1. Set up a dedicated Gmail and Google Voice account to use exclusively for this Google Voice setup on your PBX. Head over to the Google Voice site and register. You’ll need to provide a U.S. phone number to verify your account by either text message or phone call.

2. Once you have verified your account by entering your verification code, you’ll get a welcome message from Mr. Google. Click Continue to Google Voice.

3. Provide an existing U.S. phone number for verification. It can be the same one you used to set up your Google account in step #1.

4. Once your phone number has been verified, choose a DID in the area code of your choice.

Special Note: Google continues to tighten up on obtaining more than one Google Voice number from the same computer or the same IP address. If this is a problem for you, here’s a workaround. From your smartphone, install the Google Voice app from iPhone App Store or Google’s Play Store. Then open the app and login to your new Google account. Choose your new Google Voice number when prompted and provide a cell number with SMS as your callback number for verification. Once the number is verified, log out of Google Voice. Do NOT make any calls. Now head back to your PC’s browser and login to https://voice.google.com. You will be presented with the new Google Voice interface which does not include the Google Chat option. But fear not. At least for now there’s still a way to get there. After you have set up your new phone number and opened the Google Voice interface, click on the 3 vertical dots in the left sidebar (it’s labeled More). When it opens, click Legacy Google Voice in the sidebar. That will return you to the old UI. Now click on the Gear icon (upper right) and choose Settings. Make sure the Google Chat option is selected and disable forwarding calls to whatever default phone number you set up.

5. When your DID has been assigned, click the More icon at the bottom of the left column of the Google Voice desktop. Click Legacy Google Voice. Now click the Settings icon on your legacy Google Voice desktop. Make certain that Forward Calls to Google chat is checked and disable calls to your forwarding number. Click on the Calls tab and select Call Screening:OFF, CallerID (Incoming):Display Caller’s Number, and Global Spam Filtering:checked. The remaining entries should be blank.

6. Google Voice configuration is now complete. Sign out of your Google Voice account.

The Simonics GV-SIP Gateway Solution. Here’s the quick thumbnail of the steps to put all the pieces in place. First, we set up a Google Voice account at Google as documented above. Next, we’ll set up an account at the Simonics site to link our Google Voice account to the Simonics SIP Gateway. Then we’ll plug our Simonics SIP credentials into the preconfigured Simonics trunk on Incredible PBX. Finally, we’ll add Incoming and Outgoing Routes to tell Incredible PBX how to process Google Voice calls.

Now you’re ready to set up an account on the Simonics site. With this Nerd Vittles link, there’s a one-time fee of $4.99.

1. Start by registering your new Google account.

2. After paying the $4.99 registration fee via PayPal, proceed through the setup process to link your Google Voice account and 11-digit Google Voice phone number to the Simonics SIP Gateway.

3. You then will be provided your SIP username and password as well as the gateway address, gvgw.simonics.com, to use in building your SIP trunk on your PBX.

4. If your SIP credentials ever get compromised, regenerate your password by logging back into the Simonics GW site.

Now it’s time to configure your Simonics trunk in Incredible PBX. Start by logging into the web interface as admin with your admin password from above. Click Connectivity:Trunks and choose the Simonics trunk in the PBX Configuration menu. The Simonics trunk template will display:

1. Untick the Disable Trunk check box.

2. In Outbound CallerID, insert your 10-digit Google Voice number.

3. In username, insert GV1 followed by your 10-digit Google Voice number.

4. In secret, insert your Simonics SIP password.

5. In the Registration String, insert GV1 followed by your 10-digit Google Voice number followed by a colon (:)

6. In the Registration String after the colon, insert your Simonics SIP password.

7. In the tail of the Registration String after the slash (/), insert your 10-digit Google Voice number.

8. Click Submit Changes and then Reload the Dialplan when prompted.

Configuring GV Trunk with Motif in the GUI. If you elect to configure your Google Voice trunk natively using the Incredible PBX GUI, you first will need to obtain a Refresh_Token if you elected to use OAuth 2 authentication.

1. Be sure you are still logged into your Google Voice account. If not, log back in at https://voice.google.com.

2. In a separate browser tab, go to the Google OAUTH Playground using your browser while still logged into your Google Voice account.

3. Once logged in to Google OAUTH Playground, click on the Gear icon in upper right corner (as shown below).

3a. Check the box: Use your own OAuth credentials
3b. Enter Incredible PBX OAuth Client ID:

466295438629-prpknsovs0b8gjfcrs0sn04s9hgn8j3d.apps.googleusercontent.com

3c. Enter Incredible PBX OAuth Client secret: 4ewzJaCx275clcT4i4Hfxqo2
3d. Click Close

4. Click Step 1: Select and Authorize APIs (as shown below)

4a. In OAUTH Scope field, enter: https://www.googleapis.com/auth/googletalk
4b. Click Authorize APIs (blue) button.

5. Click Step 2: Exchange authorization code for tokens

5a. Click Exchange authorization code for tokens (blue) button

5b. When the tokens have been generated, Step 2 will close.

6. Reopen Step 2 and copy your Refresh_Token. This is the "password" you will need to enter (together with your Gmail account name and 10-digit GV phone number) when you add your GV trunk in the Incredible PBX GUI. Store this refresh_token in a safe place. Google doesn’t permanently store it!

7. Authorization tokens NEVER expire! If you ever need to remove your authorization tokens, go here and delete Incredible PBX Google Voice OAUTH entry by clicking on it and choosing DELETE option.

Switch back to your Gmail account and click on the Phone icon at the bottom of the window to place one test call. Once you successfully place a call, you can log out of Google Voice and Gmail.

Yes, this is a convoluted process. Setting up a secure computing environment often is. Just follow the steps and don’t skip any. It’s easy once you get the hang of it. And you’ll sleep better.

Now you’re ready to configure your Google Voice account in Incredible PBX. You do it from within the Incredible PBX GUI by choosing Connectivity:Google Voice. Just plug in your Google Voice Username, enter your refresh_token from Step #6 above as your Google Voice Password, enter your 10-digit Google Voice Phone Number, and check the first two boxes: Add Trunk and Add Outbound Routes. Then click Submit and Apply Settings to save your new entries.

If you elected to use plain-text passwords for Google Voice, simply skip obtaining OAuth 2 credentials and substitute your plain-text password for the refresh_token when you create the Google Voice trunk above. If you have trouble getting Google Voice to work using a plain-text password, try this Google Voice Reset Procedure. It usually fixes connectivity problems. If it still doesn’t work, enable Less Secure Apps using this Google tool.

IMPORTANT: Once you’ve entered your credentials, you MUST restart Asterisk from the Linux command line, or Google Voice calls will fail: amportal restart

Incredible PBX Wholesale Providers Access

Nerd Vittles has negotiated a special offer that gives you instant access to 300+ wholesale carriers around the globe. In lieu of paying the $650 annual fee for the service, a 13% wholesale surcharge is assessed to cover operational costs of TelecomsXchange. In addition, TelecomsXchange has generously offered to contribute a portion of the surcharge to support the Incredible PBX open source project. See this Nerd Vittles tutorial for installation instructions and signup details.

Continue Reading: Configuring Extensions, Trunks & Routes

Don’t Miss: Incredible PBX Application User’s Guide covering the 31 Whole Enchilada apps

Originally published: Monday, April 16, 2018

Support Issues. With any application as sophisticated as this one, you’re bound to have questions. Blog comments are a difficult place to address support issues although we welcome general comments about our articles and software. If you have particular support issues, we encourage you to get actively involved in the PBX in a Flash Forum. It’s the best Asterisk tech support site in the business, and it’s all free! Please have a look and post your support questions there. Unlike some forums, the PIAF Forum is extremely friendly and is supported by literally hundreds of Asterisk gurus and thousands of users just like you. You won’t have to wait long for an answer to your question.

NEW YEAR’S TREAT: If you could use one or more free DIDs in the U.S. with unlimited inbound calls and unlimited simultaneous channels, then today’s your lucky day. TelecomsXChange and Bluebird Communications have a few hundred thousand DIDs to give away so you better hurry. You have your choice of DID locations including New York, New Jersey, California, Texas, and Iowa. The DIDs support Voice, Fax, Video, and even Text Messaging (by request). The only requirement at your end is a dedicated IP address for your VoIP server. Once you receive your welcome email with your number, be sure to whitelist the provider’s IP address in your firewall. For Incredible PBX servers, use add-ip to whitelist the UDP SIP port, 5060, using the IP address provided in your welcoming email.

Here’s the link to order your DIDs.

Your DID Trunk Setup in your favorite GUI should look like this:

Trunk Name: IPC
Peer Details:
type=friend
qualify=yes
host={IP address provided in welcome email}
context=from-trunk

Your Inbound Route should specify the 11-digit DID beginning with a 1. Enjoy!

Need help with Asterisk? Join our new MeWe Support Site.

Special Thanks to Our Generous Sponsors

FULL DISCLOSURE: ClearlyIP, Skyetel, Vitelity, DigitalOcean, Vultr, VoIP.ms, 3CX, Sangoma, TelecomsXchange and VitalPBX have provided financial support to Nerd Vittles and our open source projects through advertising, referral revenue, and/or merchandise. As an Amazon Associate and Best Buy Affiliate, we also earn from qualifying purchases. We’ve chosen these providers not the other way around. Our decisions are based upon their corporate reputation and the quality of their offerings and pricing. Our recommendations regarding technology are reached without regard to financial compensation except in situations in which comparable products at comparable pricing are available from multiple sources. In this limited case, we support our sponsors because our sponsors support us.

BOGO Bonaza: Enjoy state-of-the-art VoIP service with a $10 credit and half-price SIP service on up to $500 of Skyetel trunking with free number porting when you fund your Skyetel account. No limits on number of simultaneous calls. Quadruple data center redundancy. $25 monthly minimum spend required. Tutorial and sign up details are here.

The lynchpin of Incredible PBX 2020 and beyond is ClearlyIP components which bring management of FreePBX modules and SIP phone integration to a level never before available with any other Asterisk distribution. And now you can configure and reconfigure your new Incredible PBX phones from the convenience of the Incredible PBX GUI.

VitalPBX is perhaps the fastest-growing PBX offering based upon Asterisk with an installed presence in more than 100 countries worldwide. VitalPBX has generously provided a customized White Label version of Incredible PBX tailored for use with all Incredible PBX and VitalPBX custom applications. Follow this link for a free test drive!

Special Thanks to Vitelity. Vitelity is now Voyant Communications and has halted new registrations for the time being. Our special thanks to Vitelity for their unwavering financial support over many years and to the many Nerd Vittles readers who continue to enjoy the benefits of their service offerings. We will keep everyone posted on further developments.

Complete Google Voice setup tutorial is available here. [↩]

Tag Archives: IncrediblePBX

The Most Versatile VoIP Provider: FREE PORTING

Links

Follow us

Recent Posts

Special Thanks to Our Generous Sponsors

Special Thanks to Our Generous Sponsors

Choosing the Best VoIP Platform for Your Needs

VoIP Platform Feature Summary

Deploying a Local Server vs. Cloud Platform

Available Free Trunks for VoIP Servers

Special Thanks to Our Generous Sponsors

Special Thanks to Our Generous Sponsors

Registering Your OBi2x Device with OBiTALK

Configuring a Google Voice Trunk on OBi200

Configuring OBi SIP Trunk for Asterisk

Configuring Incredible PBX GUI for an OBi200

Configuring VitalPBX to Use an OBi200

Special Thanks to Our Generous Sponsors

Obtaining IBM Watson STT Credentials

Outgoing SMTP Email Setup

Installing VitalPBX Voice Recognition Engine

Special Thanks to Our Generous Sponsors

Getting Started with Incredible PBX 13-13

Using the Incredible PBX 13-13 Web GUI

Reconfiguring PortKnocker for OpenVZ

Reconfiguring NeoRouter VPN for OpenVZ

Upgrading to Incredible PBX Whole Enchilada

Installing Incredible Fax with HylaFax/AvantFax

Upgrading to IBM Speech Engines

Configuring Google Voice with Incredible PBX

Incredible PBX Wholesale Providers Access

Special Thanks to Our Generous Sponsors

Post navigation

Support Nerd Vittles

Free Asterisk Solutions

Tags