Home » Technology » The Asterisk Mother Lode: Introducing the Orgasmatron II for the $199 Everex gPC2

The Most Versatile VoIP Provider: FREE PORTING

The Asterisk Mother Lode: Introducing the Orgasmatron II for the $199 Everex gPC2

Well, okay. Today's creation still doesn't quite measure up to the legendary Orgasmatron... but, we're getting closer. It's been several months since we released our first Orgasmatron for Asterisk®. Much has changed both in Asterisk and in the hardware and software environment since then. So today, to celebrate the release of PBX in a Flash 1.3 and FreePBX 2.5, we're taking another stab at building the Ultimate Kitchen Sink. From the time you insert the CD 'til you have a functioning Asterisk PBX with all the bells and whistles imaginable... 15 minutes! There's now a custom build for the Dell SC440 as well. Here's the link.

Our approach today is refined a bit since the last time around. The processing overhead of CentOS 5.2 continues to make VMware problematic. Luckily, the price of hardware continues its downward spiral. So today we're comfortable recommending the best phone, the best value PC, and our own new entry in the VoIP provider sweepstakes. But, you'd better hurry, there's only one retailer still carrying the Everex Green PC: good old WalMart. And now you can even get free shipping of the unit to the WalMart store of your choice.

If you've been following along with our articles, you already know that we've identified what we believe to be the perfect Asterisk SIP phone, the Aastra 57i, and we've also identified a perfect small business/home computer on which to run a production Asterisk server for about 50 employees, the Everex gPC2 (aka "The WalMart Special"). So this build provides a preconfigured gPC2 installation on a 2-disk ISO image backup of the whole system using Mondo. And, NO, it won't work with any other hardware! Once you download the ISO images and burn your CDs, it's a 15-minute No-Brainer to install the entire image onto your own Everex gPC2. But you must have a gPC2 so accept no substitutes, or you may end up with an Electronic Brick instead of an Orgasmatron II. Once again for the reading impaired, the $199 gPC2 systems are only available from WalMart.

We've preconfigured some extensions on your new system as well as outbound and incoming trunks from some terrific providers including our own new entry for VoIP terminations. Ours is dirt cheap, of course, at just over a penny a minute in the U.S. and about half that in many parts of Canada. You literally can sign up for service, plug in your phones, and have a system in full operation in under an hour.

So... what do you get with this preconfigured build? In addition to all of the goodness of a stock PBX in a Flash 1.3 build including Asterisk running under CentOS 5.2, you also get the brand new FreePBX 2.5 as well as the latest versions of Apache, MySQL, PHP, and SendMail. And you get a Baker's Dozen preconfigured Nerd Vittles applications. Complete documentation is available here.

  • Inbound and Outbound VoIP Faxing Using nvFax... finally!
  • FONmail for Asterisk to send voice messages to any email address on the planet
  • AsteriDex RoboDialer and Telephone Directory
  • Telephone Reminders with Support for Recurring Reminders and Web-based TTS Reminder Messages
  • NewsClips for Asterisk featuring Dozens of Yahoo News Feeds (TTS)
  • Weather Reports by Airport Code (TTS)
  • Weather Reports by ZIP Code (TTS)
  • Worldwide Weather Forecasts (TTS)
  • xTide for Asterisk (TTS)
  • MailCall for Asterisk: Get Your Email By Telephone (TTS)
  • TeleYapper 4.0 Message Broadcasting System
  • CallWho for Phone Lookup and Dialing of Entries in the AsteriDex Database (TTS)
  • TFTP Server with preconfigured setups for 15 Aastra 57i SIP telephones

In addition, you get dozens of preconfigured telephony applications and functions that would take even an expert the better part of a year or two to build independently. And, unlike all of the other distributions, we build Asterisk from source so it's simple to modify and upgrade whenever you feel the need. Here's a short list of what you have to look forward to:

  • Stealth AutoAttendant with Welcome and Application IVRs
  • Key Telephone Support Using Park and Parking Lot
  • Intercom/Paging Support
  • Bluetooth Proximity Detection with Automatic Call Forwarding to Cell Phone
  • DISA
  • Blacklisting with Web and Telephony Interfaces
  • CallerID Name Lookups from 8 Providers
  • Weekly Automated System Backups to a Flash Drive
  • One Touch Day/Night Service
  • Music on Hold
  • Voicemail with Email Delivery of Messages and Pager Notification
  • Voicemail Blasting
  • Cell Phone Direct Dial
  • Call Forward: All, Busy, No Answer
  • Call Waiting
  • Call Pickup
  • Zap Barge
  • Call Transfer: Attended and Blind
  • Dictation Service with Email Delivery
  • Do Not Disturb
  • Gabcast
  • Phonebook Dial by Name
  • Speed Dial
  • Flite Text to Speech (TTS)
  • Windows Networking with SAMBA
  • Linux Firewall
  • PBX in a Flash Software Update Service To Keep Your System Current
  • One-Click Cepstral TTS Install with Allison... Just Type install-cepstral

Prerequisites. As mentioned, you'll need a $199 Everex gPC2 (aka The WalMart Special) to use this build. We also recommend an additional $25 gig of RAM for anything other than home use. We also recommend a 4GB USB flash drive on which to store automatic weekly backups of your new system. Just plug it into your new machine, log in as root, and type: /root/usbformat.sh. That's it! Every Sunday night, you'll get a new backup in ISO format on your flash drive. If something goes wrong on your system, copy the ISOs to CDs and reboot with Disk 1. It doesn't get any easier than that. And you can always check on the latest backup by issuing the command: /root/usbcheck.sh

Finally, you'll need to cough up a whopping $5 to download the two-disk ISO image for this build. And, yes, we eat our own dog food. The ISO images you'll be downloading were captured as a backup on the flash drive of our gPC2 lab machine. If you use this special build, it seemed only fair that you cover the cost of the bandwidth to download it. As most of you know, we don't have the luxury of freeloading off SourceForge for our downloads. And we didn't want to impose upon our existing bandwidth providers to bring you this custom image. The good news is that, once you download the image from DreamHost, you are more than welcome to pass it along to one or more of your friends or business acquaintances at no charge. You can even do it electronically through the DreamHost Files Forever program. And, if you'd like to host this image for your fellow man at no cost, be our guest... and thank you! Bottom line: For about $250, you'll have the slickest, most reliable PBX and fax machine on the planet with rock-solid weekly backups and, of course, access to the one-of-a-kind PBX in a Flash Software Update Service!

Getting Started. Once you have purchased your Everex gPC2, take it out of the box, plug it into your LAN with DHCP and DNS support and Internet connectivity. Having said that, we strongly recommend that you always keep your system running behind a NAT-based firewall/router. We strongly recommend the dirt-cheap dLink WBR-2310 WiFi router which handles NAT issues with VoIP masterfully. Don't redirect any ports to the machine and don't turn the PC on just yet.

Download the two ISO images for the gPC2 from here. If you don't know how to create a CD from an ISO image, read that section from our previous article. In fact, read the whole article. It'll help you immensely down the road. Once you have the two CDs in hand, turn on the gPC2 and quickly insert Disk 1 into the CD/DVD drive and close the drive. If you don't see a Mondo Rescue screen within a minute or less, turn the machine off and then back on again. At the Mondo Rescue main screen, type nuke and press the Enter key. This will erase, repartition, and reformat your hard disk in case you didn't know. This is normal. If you get any kind of errors about incorrect drive or partition names, halt the install by pressing CTL-ALT-DEL and remove the CD. You'll need to install PBX in a Flash using our standard ISO which is available here. Otherwise, go have a cup of coffee and come back in about 12 minutes. When prompted, insert Disk 2 and press the Enter key to finish the install. When the CD ejects, remove it and your gPC2 will reboot after you perform the three-finger salute (Ctl-Alt-Del).

After the reboot finishes, type root at the login prompt for your username and password for your password. The IP address assigned by your DHCP server should appear near the top of the screen. Write it down. If there is no IP address, your machine does not have network connectivity or access to a DHCP server with an available IP address. Correct the problem and reboot.

Securing Passwords. We're going to change five passwords now. For the time being (until you've done some reading), think up one really difficult password (that you won't forget) and use it for all five passwords. At the root@pbx:~ $ command prompt, type the following commands and type in your new password when prompted. Don't forget your password or you'll get to put in your two CDs and start over.

/usr/libexec/webmin/changepass.pl /etc/webmin root yournewpasswordhere

Now, using a web browser, go to the IP address of your new PBX in a Flash server. Click the Admin tab and then choose the FreePBX Administration botton. Log in as maint with your new maint password. Before you do anything else, change ALL of the 16 extension passwords to something secure... as if your phone bill depended upon it! Click Setup, Extensions and then choose each extension, modify BOTH the device secret and Voicemail Password, and click Submit. When you finish all the extensions, then reload the dialplan to save your changes. Finally, change your DISA password to something very, very secure: Setup, DISA, DISAmain, PIN. Reload your dialplan once again to save your changes.

Regardless of what you may read elsewhere, the Orgasmatron II has all the very latest security patches as of October 1. If you want more security, take our advice and add a hardware-based firewall/router between your Internet connection and your new Orgasmatron II and don't expose port 80 (the web interface) to the Internet!

Permanently Setting the IP Address. There are different schools of thought on whether to use a fixed or dynamic IP address. Most hardware-based routers support DHCP IP address reservations. The simplest way to permanently secure the existing IP address for your server is to reserve it on your router. If you'd prefer to assign your own IP address, we have included the deprecated netconfig utility which can be run after logging into your server as root. Sometimes you will need to run it once, enter your settings, reboot, and then repeat the drill. Then you should be all set. Either way, you need a permanent IP address for your machine when all is said and done. Once you have a permanent IP address, hop on over to dyndns.org and sign up for your own fully-qualified domain name (FQDN), e.g. mypbx.dyndns.org. You're going to need it for a whole host of things with your new PBX, and dyndns.org is about the easiest way to do it. Once you have your FQDN and DynDNS username and password, log in as root and edit: /etc/ddclient/ddclient.conf. Search (Ctl-W) for ***. Fill in your username and password and uncomment those two lines. Then search for *** again, uncomment the next three lines and fill in your fully-qualified domain name. Save the file and service ddclient restart. To make sure everything worked, issue the following command: ddclient -force. Assuming there are no errors, issue the following command to start ddclient each time your server reboots: /sbin/chkconfig --add ddclient. Now the IP address of your Asterisk server will always resolve to your FQDN from DynDNS. And anyone can call you via SIP for free using the following SIP URI: mothership@yourFQDN.dyndns.org. You can take this a step further and sign up for a free incoming phone number at ipkall.com. For your account type, choose SIP. For your SIP phone number, enter: mothership. For your SIP proxy, enter the fully-qualified domain name (FQDN) for your server, e.g. mypbx.dyndns.org. Choose a password and enter your real email address, and they will beam you a Washington state phone number within a day or so. You can't beat the price!

Adding Plain Old Phones. Before your new PBX will be of much use, you're going to need something to make and receive calls, i.e. a telephone. For today, you've got several choices: a POTS phone, a softphone, or a SIP phone (highly recommended). Option #1 and the best home solution is to use a Plain Old Telephone or your favorite cordless phone set (with 8-10 extensions) if you purchase a little device (the size of a pack of cigs) known as an SPA-2102. It's under $70. Be sure you specify that you want an unlocked device, meaning it doesn't force you to use a particular service provider. Once you get it, plug the device into your LAN, and then plug your phone instrument into the SPA-2102. Note that this adapter supports two-line cordless phones! Your router will hand out a private IP address for the SPA-2102 to talk on your network. You'll need the IP address of the SPA-2102 in order to configure it to work with Asterisk. After you connect the device to your network and a phone to the device, pick up the phone and dial ****. At the voice prompt, dial 110#. The device will tell you its DHCP-assigned IP address. Write it down and then access the configuration utility by pointing your web browser to that IP address.

Once the configuration utility displays in your web browser, click Admin Login and then Advanced in the upper right corner of the web page. When the page reloads, click the Line1 tab and then repeat this drill for the Line2 tab if you want to connect the device to two extensions on your Asterisk system. Scroll down the screen to the Proxy field in the Proxy and Registration section of the form. Type in the private IP address of your Asterisk system which you wrote down previously. Be sure the Register field is set to Yes and then move to the Subscriber Information section of the form. Assuming you're using the preconfigured extensions starting with 701, do the following. Enter House Phone as the Display Name. Enter 701 as the User ID. Enter your actual password for this extension in the Password field, and set Use Auth ID to No. Click the Submit All Changes button and wait for your Sipura to reset. In the Line 1 Status section of the Info tab, your device should show that it's Registered. You're done. Now repeat the drill for Line2 using extension 702. Pick up a phone and dial 1234# to test out BOTH extensions.

Downloading a Free Softphone. Unless you already have an IP phone, the easiest way to get started and make sure everything is working is to install an IP softphone. You can download a softphone for Windows, Mac, or Linux from CounterPath. Or download the pulver.Communicator. Here's another great SIP/IAX softphone for all platforms that's great, too, and it requires no installation: Zoiper 2.0 (formerly IDEfisk). All are free! Just install and then configure with the IP address of your PBX in a Flash server. For username and password, use one of the extension numbers and passwords which you set up with FreePBX. Once you make a few test calls, don't waste any more time. Buy a decent SIP telephone. We think the best phone out there is the Aastra 57i for under $200. Another $100 buys you the Aastra 57i CT with a cordless DECT phone.

Configuring Aastra 57i SIP Phones. Your new system comes preconfigured to automatically configure up to 15 Aastra 57i phones. Plug each phone into your network and wait for it to boot. Once it boots, press the Option button, then Phone Status (3), then IP & MAC Address (1). Write down each phone's IP address and MAC address. Then press Done to exit from the menus.

Next, we need to tell your phone to use your new Asterisk server as the TFTP server to obtain its setup. Press the Option button again, then Admin Menu (5). Type 22222 for the admin password and press Enter. Then choose Config Server (1), then TFTP Settings (2), then Primary TFTP (1), enter the IP address of your new server, and press Done a half dozen times.

Log back into your server as root. Switch to the TFTP directory: cd /tftpboot. You'll notice that there are config files for up to 15 phones. Simply choose the extension number you wish to use for each phone AND rename each file (filenames are 701.cfg to 715.cfg) to the MAC address of each phone.cfg. Do NOT use hyphens in the MAC address. One final step and you'll be ready to load up your phones. We need to set the correct IP address to tell each phone where your server is located. So... issue the following command using the IP address of your new server instead of Leave the rest of the command as it is!

sed -i 's|||g' /tftpboot/aastra.cfg

Now restart each phone by pressing the Option button and then Restart Phone (6) and then the Restart button. Once the phone reboots, you can make a test call by dialing 1-2-3-4. You can get the latest news by dialing 5-1-1. Or get a weather forecast by airport code (6-1-1) or zip code (Z-I-P).

A Word About Ports. For the techies out there that want to configure remote telephones or link to a server in another town, you'll need to know the ports to remap to your new server from your firewall. Here's a list of the ports available and used by PBX in a Flash. We don't recommend exposing UDP 5038 which is used to communicate with Asterisk via the Asterisk Manager.

TCP 80 - HTTP (needed to access the web sites on your server from the Internet... not recommended!!!)
TCP 22 - SSH (needed if you want remote SSH access)
TCP 9001 - WebMin (needed if you want remote WebMin access... not recommended!!!)
UDP 10000-62000 - RTP (needed for SIP communications)
UDP 5004-5037 - SIP (ditto)
UDP 5039-5082 - SIP (ditto)
UDP 4569 - IAX2 (needed for IAX communications typically between Asterisk servers)

Setting Up Trunks for Outgoing and Incoming Calls. If you want to communicate with the rest of the telephones in the world, then you'll need a way to route outbound calls (terminations) to their destination. And you'll need a phone number (DIDs) so that folks can call you. Unlike the Ma Bell world, you need not rely upon the same provider for both. And nothing prevents you from having multiple outbound and incoming trunks to your new PBX. At a minimum, however, you do need one outbound trunk and one inbound phone number unless you're merely planning to talk to other extensions set up on your system. We've actually put all the hooks in place to make it easy for you to interconnect to other Asterisk servers, but we'll save that for another day. For today, we want to get you a functioning system so that you can place outbound calls to anywhere in the world and can receive incoming calls from anywhere in the world.

For outbound calling, we recommend you establish accounts with several providers. We've included the necessary setups for our own service as well as Vitelity and AOL. To register for our service, just dial any 10-digit phone number from a phone on your system before you set up any other trunks. We're one of the least expensive providers, but you know the old saying about that. Give us a try and, if you don't like the call quality, do some more shopping. We think it's pretty good quality actually, but we don't sell DIDs for inbound service... yet.

Vitelity: One of the Best Providers on the Planet. If you're seeking the best flexibility in choosing an area code and phone number plus reasonable entry level pricing plus high quality calls, then Vitelity is a winner. Vitelity provides Tier A DID inbound service in over 3,000 rate centers throughout the US and Canada. And, when you use our special link to sign up, the Nerd Vittles and PBX in a Flash projects get a few shekels down the road while you get an incredible signup deal as well. The going rate for Vitelity's DID service is $7.95 a month which includes up to 4,000 incoming minutes on two simultaneous channels with terminations priced at 1.45¢ per minute. For PBX in a Flash users, sign up before October 15, and you can purchase a Tier A DID with unlimited incoming calls for just $3.99 a month and you get a free hour of outbound calling to test out their call quality. To check availability of local numbers and tiers of service from Vitelity, click here. Do not use this link to order your DIDs, or you won't get the special pricing! After the free hour of outbound calling, Vitelity's rate is just 1.44¢ per minute for outbound calls in the U.S. You can't beat the price (except with us) and the call quality is excellent as well. We've tried just about everybody.

To sweeten the pot a bit more, we've preconfigured both inbound and outbound Vitelity trunks for you. For the vitel-inbound trunk, all you'll need to do is plug in your username, password, and host assigned by Vitelity and adjust the registration string to match your assigned username and password. In FreePBX, click Setup, Trunks, SIP/vitel-inbound and make the changes. Then adjust the vitel-outbound trunk to reflect your actual username in the fromuser and username entries, your real password in the secret entry, and the correct host provided by Vitelity for your outbound calls, and you're all set. In FreePBX, click Setup, Trunks, SIP/vitel-outbound and make the changes. The same setup drill will get you going the the PIAF VoIP service as well, and you have your choice of the following POPs: Houston, Dallas, LAX, NYC, London, Montreal, and Toronto. The POP addresses are entered in the following format: sip.lax.pbxinaflash.net or sip.london.pbxinaflash.net.

To test things out, pick up a phone configured on your system and dial an area code and number of someone in the United States or Canada. Now get someone to call you using your new number. Presto! You have inbound and outbound phone service. And, if you'd like to see just how good SIP service can be, pick up a phone on your system and dial D-E-M-O. This will connect you to the PBX in a Flash hosted demo applications server at Aretta Communications.

An Alternate Outbound Calling Solution. As we said, it costs you almost nothing to add an alternate outbound calling solution to your new system. As luck would have it, adding a third outbound calling provider is now a breeze because AOL just entered the SIP terminations market with a product called AIM Call Out. We wrote about it recently, and you can read the article here. All you need is an AOL or AIM account name and $5 to get you started. The system you've just installed is preconfigured to use AIM Call Out. All you have to do is plug in your username and password, and you can immediately make calls to anywhere in the United States for under 2¢ per minute. Adding international calling is as easy as inserting the correct dial string. If you never use it, it doesn't cost you a dime. So $5 is mighty cheap insurance in our book.

First things first. Sign up for the service at this link. Your username will look something like this: johndoe@aim.com. You also will be assigned a password. Using your web browser, open FreePBX by pointing to the IP address of your new server and choosing Administration, then FreePBX. Type in admin as your username and the password you assigned to your system. From the main FreePBX menu, choose Setup, Trunks, and click on SIP/AIM in the far right column. Scroll down to the Peer Details section of the form and replace yourAIMpassword with your new password. Then replace yourAIMaccountname with your actual AIM account name. Now click the Submit Changes button and then Apply Configuration Changes and Continue with Reload.

Setting Up an Alternate DID for Incoming Calls. You also may want to consider a second phone number where people can call you. For example, if Grandma and Grandpa happen to be in another state and still have an old fashioned telephone, you might consider adding an additional DID to your system in their area code. They then can make a local call to reach you by dialing the local DID. On the les.net pay-as-you-go plan, it costs less than a dollar a month plus a penny a minute for the calls. Money well spent if we do say so... and you'll sleep better.

If this setup looks a bit complicated, don't be intimidated. Remember, we're connecting your PBX to the rest of the world so people can call you! With les.net, you have a choice of rate plans for most DIDs. You either can pay $3.99 a month for unlimited inbound calls with two concurrent channels or 99¢ per month and 1.1¢ per minute with four concurrent channels. Just visit their site and click Signup to register. Once you are registered, click Login and then Order DIDs. Pick a phone number. Then click Peers/Trunks and Create New Peer. Write down the Peer Name as you will need it in a minute to set up your connection. Choose SIP for Peer Technology, RFC2833 for DTMF Mode, G.711 for Codecs, Registration for Peer Type, enter the public IP address of your server for Peer Address, make up a secure password and write it down also, specify an Outbound CallerID for your calls, and check the 10-digit dialing box. Leave voicemail unchecked since you'll handle this on your end. Save your changes.

Now choose Your DIDs and click on the one you just ordered. We now need to tie the phone number to the Peer setup you just created above. Click on the DID and select the Route to Peer which you just created. Check the Send DID Prefix box and leave everything else blank. Click Save Changes and you're finished at the les.net end. Now let's set up your inbound DID trunk in Asterisk using FreePBX.

Log into FreePBX using a web browser. Click Setup, Trunks and then Add SIP Trunk. Fill in the CallerID and then drop down to the Outgoing Settings section of the form. For Trunk Name, use the Peer Name that you created above and wrote down. It ought to look something like this: 1092832198. For Peer Details, enter the following using the Peer Name and Password you assigned at les.net:


For Incoming Settings, use from-pstn for the User Context and enter the following User Details:


For the registration string, enter a string like the following using your Peer Name and Password:


Now click the Submit Changes button and then Apply Configuration Changes and Continue with Reload.

Choosing a VoIP Provider That Supports Faxing. We've included a reliable fax solution in this build, and we'll cover all the details next week. We do want to give you a head start if you plan to use your new machine to handle inbound faxes. To test your machine, you can connect a real fax machine to one of the lines on an SPA-2102. Then send a fax to extension 329 (F-A-X). But first you must configure your email address in two places using FreePBX: Setup, General Settings, Email address to have faxes emailed to AND Setup, Inbound Routes, any DID / any CID, fax Email. Once you've saved your settings, send the fax and see if it's delivered to your email address. If it works reliably, then the fax and email applications on your machine are configured correctly. Unfortunately, that's only half the battle. To receive faxes from outside your system, you'll also need a DID from a provider that supports faxing. And then it's still only about a 90% proposition... on a good day. We've tested this with many, many VoIP providers. Some work. Many don't. Some, such as Vitelity, offer a faxing service for a fee. Guess what? Their regular VoIP setup doesn't support faxing. Our old friends at Telasip.com still support faxing. We've also had good luck with Future-Nine and Teliax. You can read the beginnings of our fax dissertation here for more details. With the exception of the trunk setup covered in the article, all of the remaining setup steps already have been completed on your new server!

Choosing a Preferred Provider. Finally, you'll need to decide whether to use us or AOL or Vitelity as your primary terminations provider. HINT: We're the cheapest! So we've set things up with us and then AOL. This is handled in FreePBX in the Outbound Routes tab under the Default entry. You can adjust easily these in any way you like by adding trunks or moving entries up and down the list to change their priority. Just be sure to leave ENUM at the top of the list since ENUM calls are always free. If a free call isn't possible, your server will automatically drop down to the next trunk in the priority list. Don't add Vitelity to the list unless you have actually created a Vitelity account since they handle unsuccessful connections in a non-standard way which will cause FreePBX not to drop down to the next trunk to attempt a connection.

A Word About Mondo Rescue. We would be remiss if we didn't mention what a fantastic open source product Mondo Rescue is. It's the sole reason that today's build was possible. Our special thanks go to the development team: Bruno Cornec, Andree Leidenfrost, and Hugo Rabson. It is the first (and only) backup software for Linux builds that actually works reliably. The best way to prove that for yourself is to download this build and try it for yourself on your Everex gPC2. It has much more flexibility than what you will experience, but that would take another dozen pages to explain. We'll save that for another day. In the meantime, if you'd like more information, visit the Mondo Rescue web site.

Where To Go From Here. Well, we've covered a good bit of territory today so we're going to save the really fun stuff for our next installment. In the meantime, you have a new phone system that works. And there are a number of PDF documents in the /root folder on your new system which are worth a read. Better yet, you can browse through all of the documentation which is available for PBX in a Flash by going here. You also can dial D-E-M-O on your new system and see just how powerful direct SIP connections can be to other Asterisk hosts (in this case, ours!)... at no cost. Finally, you can log into your server and type help-pbx for access to a treasure trove of additional features. Enjoy!

Continue reading Part II...


Special Thanks to Our Generous Sponsors

FULL DISCLOSURE: ClearlyIP, Skyetel, Vitelity, DigitalOcean, Vultr, VoIP.ms, 3CX, Sangoma, TelecomsXchange and VitalPBX have provided financial support to Nerd Vittles and our open source projects through advertising, referral revenue, and/or merchandise. As an Amazon Associate and Best Buy Affiliate, we also earn from qualifying purchases. We’ve chosen these providers not the other way around. Our decisions are based upon their corporate reputation and the quality of their offerings and pricing. Our recommendations regarding technology are reached without regard to financial compensation except in situations in which comparable products at comparable pricing are available from multiple sources. In this limited case, we support our sponsors because our sponsors support us.

BOGO Bonaza: Enjoy state-of-the-art VoIP service with a $10 credit and half-price SIP service on up to $500 of Skyetel trunking with free number porting when you fund your Skyetel account. No limits on number of simultaneous calls. Quadruple data center redundancy. $25 monthly minimum spend required. Tutorial and sign up details are here.

The lynchpin of Incredible PBX 2020 and beyond is ClearlyIP components which bring management of FreePBX modules and SIP phone integration to a level never before available with any other Asterisk distribution. And now you can configure and reconfigure your new Incredible PBX phones from the convenience of the Incredible PBX GUI.

VitalPBX is perhaps the fastest-growing PBX offering based upon Asterisk with an installed presence in more than 100 countries worldwide. VitalPBX has generously provided a customized White Label version of Incredible PBX tailored for use with all Incredible PBX and VitalPBX custom applications. Follow this link for a free test drive!

Special Thanks to Vitelity. Vitelity is now Voyant Communications and has halted new registrations for the time being. Our special thanks to Vitelity for their unwavering financial support over many years and to the many Nerd Vittles readers who continue to enjoy the benefits of their service offerings. We will keep everyone posted on further developments.

Some Recent Nerd Vittles Articles of Interest...


  1. Hello,
    I have couple of servers that I used before with other applications. Thier hardware are a lot better than the PC mentioned here.
    Is there any way to use them instead going out and buy that PC?

    Can I install that OS and then take it from there?

    [WM: You can certainly install PBX in a Flash from the 32-bit ISO. But the Orgasmatron II build requires a specific motherboard and hard drive.]

  2. Congrats for the work !
    Wouldn’t be more reliable to have this kind of distro on a netbook such as Acer Apire one (just 100$ more) : portable, battery in case of electricity cut, ect ?

    [WM: Stay tuned!]

  3. This is the same file name as last time. piaf4gpc2.zip.
    The download in my existing list shows the file to be 590.46 MB while the link shows the size for the same file name is 707.38 MB. Is this another $5 download, just want to make sure that it is not the same one updated.

    [WM: New file name is piaf4gPC2.zip. And 707.38MB is the correct size. It’s a completely new build with different CentOS, different FreePBX, different Asterisk, etc.]

  4. I have a current Trixbox system with Rhino 4FXO card.
    Q: Can I buy a gPC2, do a Orgasmatron install and add in the Rhino card from the older system? Would mondo rescue and everything else still work fine? Thanks in advance.

  5. I can’t find any gPC2 computers available anywhere to purchase. Is there any way to have this built on a machine that you can readily purchase?

    [WM: Take a look at this message thread for some ideas. We also have a new build coming for the Acer Aspire One which should be available… soon.]

  6. Hi, how will this work with a couple of sangoma fxo cards? Would I install them after everything is up and running or before copying the image back into the machine from the CDs? I want this system really bad, but I need a few FXO ports…will it work?

    [WM: Install the cards AFTER you get things going.]

  7. Does this new install include the updated XML for Aastra?
    Is there a way to easily check the release of the Aastra XML code?

    [WM: Sorry. We didn’t have sufficient time to test the new release before this went out the door. Stay tuned.]

  8. I paid the $5 dollars and downloaded a 610MB file. How could I create 2 CD’S with this one file?

    2nd question is I have the old walmart special, will it work?

    [WM: Unzip the file and you’ll have 2 ISOs for 2 CDs. Should work fine with any Everex gPC.]

  9. very strange i download the Dell’s SC440 iso mondo backup,, change the passwd-maint for hello but can’t enter the web gui with http://192.168.xxx.xxx/ with hello
    always said incorrect password but when i bypass with this url http://192.168.xxx.xxx/menu.php?id=admin ,,, i put my maint password hello and go no trouble to enter freepbx GUI???? got a clue ???try iexplore 6 or firefox 2 same bug,,, will try over tommorow with a fresh mondo restore but without changing any password … keep the good work.. I move from trixbox to PIAF because you made a clean and effective distro and very good wiki.. thanks again 🙂

    [WM: The default UI password is still password. It needs to be changed independently from within the UI Admin interface. Thanks for your note.]

  10. For the Aastra phone setup I’d like to add two points to help the other newbs like me.

    1) you need to update the password inside the MacAddressOfYourPhone.cfg file to match the password change you did when you were told that "your phone bill depends" on a strong password.

    2) make sure you use uppercase letters when changing the .cfg file to the mac address of your phone.

    Viva PBX in a flash!!!

  11. I set this up and added a second drive and enabled RAID; all easy all good. But that caused my USB thumb drive to be on /dev/sdc1 not /dev/sdb1 and that broke the automatic backup scripts that are looking for /dev/sdb1. I can easilly change /root/usbformat and /root/usbcheck, but the weekly cron job still seems to fail. Is there some easy way to either reconfigure the USB drive back to /dev/sdb1 or to change the cron weekly job to use /dev/sdc1 ?

    Thanks for the advice!

    [WM: Morris, edit /etc/asterisk/disk-backup.conf. Search for sdb1 and change it to sdc1. Save your changes, and you’re all set.]

  12. DON’T FOLLOW THE LINK TO THE $25 1GB of memory and blindly purchase as I did. The link is for memory specific to the Everex gPC not the Everex gPC2 that you should be using for this distro. The memory that this page is linked to doesn’t play nice with the memory in the gPC2. This is what was causing my constant lockups……and they say I don’t have attention to detail…hahaha.

    [WM: So long as you use a matched pair of these, there should be no problems. The crashes begin when you pair one of the new RAM chips with the existing chip in the gPC2’s. Sorry.]

  13. Can I port my number to vitelity to use as DID?

    *while I experiment with providers instead of assigning it to the local bell with call forwarding

    [WM: Sure. Just contact Vitelity and they can walk you through the process.]

  14. Why do you favor vitality over les for outbound?

    0 setup

    0 setup?

    for us lowly dynamic 15/2 cable users will the fiwld accept FQDN? (dynamic DNS)

    Yahoo apparently has phone out and phone in, too. Their phone out is half the cost.

    now lives on jajah?

    Though it seems some trickiness is required to use with any SIP capable device..

  15. So I’ve already signed up for a vitelity account and have it configured in my system. Then I come back here and see the bit about dialing any number before setting up a trunk to configure your service. How do i configure a trunk for ‘your’ service since I already have trunks installed?

  16. I would make note for others that the sed command that changes the aastra.cfg to let your phones know your server’s ip …. can only be run once. Subsequent issues of this command will not update the aastra.cfg file to the new server IP.

    FYI. I was wondering why my phones were not registering and nano’ing the aastra.cfg told the story (I was still using the old server IP)!

Comments are closed.