Home » Search results for 'sip' (Page 44)

Search Results for: sip

The Most Versatile VoIP Provider: FREE PORTING



JUST RELEASED: Visit the Incredible PBX Wiki

The Perfect Threesome: iNum + VoIP.ms + Google Voice

Monday, February 27, 2012 / 7 Comments on The Perfect Threesome: iNum + VoIP.ms + Google Voice

We’ve got a terrific new VoIP development for you today especially for those who travel internationally. For several years, a VoIP company called VoxBone has been pushing hard to establish an International Number™ (iNum™) for every phone on the planet so that every telephone could call every other telephone at little or no cost. They’re not quite there, but two recent events will certainly hasten the implementation. The first was an announcement from VoIP.ms that they would provide a free iNum DID and free iNum calling to every one of their customers with a credit balance in their account. The second was last week’s announcement from Google that they, too, would support free iNum calling worldwide using any Google Voice account. Today, we’ll show you how to take advantage of these two developments to begin making free calls worldwide using your PBX in a Flash™ server, a WiFi-enabled smartphone, and an available WiFi connection. Basically, the plan is to use free iNum calling to get back to your PBX for dial tone and then use DISA for free Google Voice calling in the U.S. and Canada.

Until everyone has an iNum or Google opens up Google Voice outside North America, the hidden beauty of iNum for those of us who have both is the cost savings that can be achieved by phoning home with iNum from anywhere in the world for free. And, once the call hits your Asterisk® PBX, it’s incredibly simple to route the call to DISA, prompt for a password, and then place a call to anywhere in the U.S. or Canada at no cost with PIAF2™ and Google Voice.

This can be accomplished in several ways. First, you can download a SIP phone and use it in conjunction with your VoIP.ms account and a smartphone to make free iNum calls from any WiFi hotspot in the world. Bria is our favorite on both the iPhone/iPad and Android platforms. If $10 is too rich for your blood, there are some free alternatives: CSipSimple for Android and 3CXPhone for Android or iPhone. A second alternative is to use Google Voice or Gtalk to connect back to your PIAF2 server via iNum and then use DISA and your local trunks to place outbound calls. A final alternative is to take advantage of the numerous local numbers now available in many countries to phone home using iNum. The only cost of these calls is the cost associated with calling the local number. You’ll find a list of the local phone numbers to make these calls on the iNum web site or in the footnote to this article.1 So today we’ll show you how to set up your PIAF2 server to support free iNum calling. It’s a 15-minute project.

VoIP.ms Setup. To get started, if you’re not already a customer, register for a voip.ms account by filling out their registration form.

Once you submit the form, you’ll have to confirm your registration by clicking on the link that is emailed to you. Then you’re ready to login with your email address and the password you set up when you created your account. That’ll bring you to the Main Portal Page for your new voip.ms account.

You’ll need a positive balance in your VoIP.ms account in order to create your free iNum account so deposit some money using PayPal or a credit card by clicking Finances, Add Funds. The minimum deposit is $25 which can be used to make penny a minute calls in the U.S. and Canada or equally reasonable calls to any phone number in the world. We won’t be doing any of that today. For today, all of our calls will be free thanks to iNum and the generous support of VoIP.ms. But the nest egg will be there as a backup to your other PIAF2 VoIP providers which is an excellent idea anyway.

Like Vitelity, VoIP.ms lets you create subaccounts to compartmentalize your VoIP services. This makes it easy to use VoIP.ms on multiple PIAF2 servers or even standalone SIP telephones. It also provides added security by separating out account names and passwords for VoIP services from your main VoIP.ms portal account that let’s you manage your settings and VoIP funding, a very good idea. So let’s first set up an account to use with Asterisk just to show you how easy it is.

From the Main Portal Menu, click on Subaccounts, Create Subaccount. The Subaccount creation form will display. Fill it out so it looks something like this. Just click on the form below to enlarge it if you want a better view.

Once you’ve clicked the button to create the subaccount, it takes about a minute for voip.ms to activate it. Then click Main Menu, Portal Home. The bottom of the portal page will now show your subaccount.

Let’s create one more subaccount. We’ll use this one so that we can access VoIP.ms from a standard SIP app running on our iPhone or Android device. We can use the subaccount either to make outbound calls directly from VoIP.ms on a pay per minute basis, or we can use it to make free iNum calls. To create the subaccount, repeat the process above and fill in the blanks using your own credentials and a very secure password. Be sure to choose ATA device, IP Phone or Softphone for the Device Type. We always leave International Calls Disabled unless we really plan to make international calls. This will not affect your ability to make iNum calls, and it reduces your financial exposure in the event your subaccount is compromised. Never, ever use auto-replenishment from your credit card on a VoIP provider account from any provider.

Before we get too far along, let’s activate your new iNum DID. Click on DID Numbers, Order DID. When the DID Order Form displays, click on the iNum link to order your free iNum DID.

When the iNum DID order form displays, fill out the form by clicking on the POP location nearest to your server. Then, in the SIP/IAX Routing column, be sure to select the Subaccount we created previously rather than the default Main Account. Finally click the Click Here to Order button.

You’ll get a Confirmation display that shows your new iNum DID. Write it down! We’ve already set up the proper routing for your new iNum DID in the previous step so you can ignore the Managing Your DID message.

That completes the setup of your VoIP.ms account with your free iNum DID. Now let’s configure your PBX in a Flash server to support VoIP.ms and iNum. We’re assuming you already have a PBX in a Flash server configured with at least one Google Voice account activated. If not, stop here and complete that step using the PIAF2 tutorial and optionally the Incredible PBX 3 and Incredible Fax 2 tutorial.

Smartphone SIP Client Setup. We used the free cSipSimple Android app to set up a connection with our second subaccount at VoIP.ms using cSipSimple’s Basic Setup Wizard. Here are the entries required to gain connectivity:

Once your SIP client is connected to VoIP.ms through your smartphone, you can make free iNum calls using this dial syntax: 0118835100xxxxxxxx where xxxxxxxx is the last 8 digits of your iNum beginning with 0. As noted previously, you do NOT have to enable international calls on your VoIP.ms subaccount for these calls to go through.

PBX in a Flash iNum Setup. We’ll be using the FreePBX GUI to configure PBX in a Flash to support iNum. Using your browser, log into the IP address of your server: http://ipaddress/admin. When prompted for your username and password, use maint and whatever FreePBX password you assigned when your server was set up.

To simplify things, we’re going to set up 2 trunks: one for your VoIP.ms subaccount and another for iNum. Begin by choosing Trunks, Add SIP Trunk in the FreePBX GUI. For Trunk Name, use voipms. For Maximum Channels, choose 2. For the Dial Pattern, enter 1 | NXXNXXXXXX and, in Outgoing Settings for the PEER Details, enter the following using your subaccount name and password as well as the POP you chose for your subaccount:

canreinvite=yes
nat=yes
context=from-trunk
host=atlanta.voip.ms
secret=subacctpw
type=peer
username=137786_myinum
disallow=all
allow=ulaw
fromuser=137786_myinum
trustrpid=yes
sendrpid=yes
insecure=invite
qualify=yes

Leave all the fields for Incoming Settings blank. For the Registration String, the syntax is subacctname:subacctpw@atlanta.voip.ms:5060/8835100xxxxxxxx. Using our example and assuming you’re using the Atlanta POP, the entry would look like this where xxxxxxxx is your own 8-digit iNum beginning with 0:

137786_myinum:secretPassword21@atlanta.voip.ms:5060/8835100xxxxxxxx

Verify that your server got a successful registration with your VoIP.ms subaccount by clicking Tools, Asterisk Info, SIP Info.

Now click Setup, Trunks, Add Custom Trunk. For Trunk Name, use iNum. For Maximum Channels, choose 5. For Dial Pattern, use 0XXXXXX. including the period! For Custom Dial String, use SIP/0118835100$OUTNUM$@voipms.

Next, we need to create an Inbound Route. Use your full iNum DID number in the DID Number field, e.g. 8835100xxxxxxxx where xxxxxxxx is your personal iNum beginning with a 0. Activate CallerID Superfecta for the CID Lookup Source. And choose a Destination for the incoming iNum calls. This could be an extension, an IVR, or whatever else you’ve set up on your server. For now, route it to a working extension on your PBX so we can test it below. Then you can edit the inbound route and change it to any destination.

Finally, create an Outbound Route. Name the route OutiNum. For the Dial Pattern, use 0XXXXXX. with the trailing period. For the Trunk Sequence for Matched Routes, choose inum. After you save the trunk settings, move it to the top of your trunk listing in the right column of FreePBX. What this route does is allow you to call other iNum numbers (including your own) by simply dialing the last 8-digits of any iNum that begins with 8835100 or 0118835100. These 8 digits will ALWAYS begin with a 0.

Now let’s modify at least one of your existing Google Voice Outbound Routes so that you also can make iNUM calls with Google Voice by dialing from any extension using the full 8835100xxxxxxxx international number. Go to Outbound Routes and click on the name of one of your Google Voice trunks. Add the following new Dial Pattern and click Submit Changes: 8835100XXXXXXXX

Taking iNum for a Spin. To test things out, use a phone connected to an extension other than the one you chose to route incoming iNum calls to above. Dial the last 8 digits of your own iNum DID, and that extension should begin ringing. Answer the other extension and make sure you have audio in both directions. Next, dial your complete iNum DID beginning with 8835100. This should also cause the other extension to ring even though the call was initiated through your Google Voice trunk. If you’d like to get a Weather Report by Zip Code, we’ve set up an iNum for you to try. Just dial 09901997.
Enjoy!

Originally published: Monday, February 27, 2012


Need help with Asterisk? Visit the PBX in a Flash Forum.
Or Try the New, Free PBX in a Flash Conference Bridge.

whos.amung.us If you’re wondering what your fellow man is reading on Nerd Vittles these days, wonder no more. Visit our new whos.amung.us statistical web site and check out what’s happening. It’s a terrific resource both for us and for you.

 

Special Thanks to Our Generous Sponsors


FULL DISCLOSURE: ClearlyIP, Skyetel, Vitelity, DigitalOcean, Vultr, VoIP.ms, 3CX, Sangoma, TelecomsXchange and VitalPBX have provided financial support to Nerd Vittles and our open source projects through advertising, referral revenue, and/or merchandise. As an Amazon Associate and Best Buy Affiliate, we also earn from qualifying purchases. We’ve chosen these providers not the other way around. Our decisions are based upon their corporate reputation and the quality of their offerings and pricing. Our recommendations regarding technology are reached without regard to financial compensation except in situations in which comparable products at comparable pricing are available from multiple sources. In this limited case, we support our sponsors because our sponsors support us.

BOGO Bonaza: Enjoy state-of-the-art VoIP service with a $10 credit and half-price SIP service on up to $500 of Skyetel trunking with free number porting when you fund your Skyetel account. No limits on number of simultaneous calls. Quadruple data center redundancy. $25 monthly minimum spend required. Tutorial and sign up details are here.

The lynchpin of Incredible PBX 2020 and beyond is ClearlyIP components which bring management of FreePBX modules and SIP phone integration to a level never before available with any other Asterisk distribution. And now you can configure and reconfigure your new Incredible PBX phones from the convenience of the Incredible PBX GUI.

VitalPBX is perhaps the fastest-growing PBX offering based upon Asterisk with an installed presence in more than 100 countries worldwide. VitalPBX has generously provided a customized White Label version of Incredible PBX tailored for use with all Incredible PBX and VitalPBX custom applications. Follow this link for a free test drive!
 

Special Thanks to Vitelity. Vitelity is now Voyant Communications and has halted new registrations for the time being. Our special thanks to Vitelity for their unwavering financial support over many years and to the many Nerd Vittles readers who continue to enjoy the benefits of their service offerings. We will keep everyone posted on further developments.
 

Some Recent Nerd Vittles Articles of Interest…

  1. Local iNum Access Numbers include the following: [↩]

Thumbs Up: A New Flash Drive Installer for PIAF2 + CentOS6

Monday, February 20, 2012 / 1 Comment on Thumbs Up: A New Flash Drive Installer for PIAF2 + CentOS6

Original photo courtesy of Green House Co. Ltd.

With the advent of netbooks and the gradual disappearance of optical drives, it’s just a matter of time until USB thumb drives will be the only remaining physical installation method still available for most software. Look no further than Apple’s Lion OS if you don’t believe it. Of course, if Microsoft has its way, no installation of Linux will be available with some Windows 8 hardware… for your own safety, of course. We’ll leave that for the courts to sort out.

Since inception, one of the key goals of the PBX in a Flash™ project has been to provide an install option that works reliably with USB thumb drives. Thanks to the great work of bmore on the PIAF Forums, a USB Flash Drive installer was developed for PBX in a Flash 1.7.5.6.2. And today, we’re pleased to deliver a more flexible thumb drive installation method for 32-bit PIAF2™ installs running under CentOS™ 6.2. With this new thumb drive installer comes support for every current version of Asterisk® and FreePBX®.

With PIAF2, you get your choice of Asterisk 1.8.8.0 or 10.0.0 as well as FreePBX 2.8, 2.9, or 2.10. And, with the standard PIAF2 ISO installer, you also have the option of exiting to the Linux command prompt to compile a network driver or to select from a broad selection of newer Asterisk releases. If you choose this option, you’ll be prompted to log into your server as root with the root password you chose initially. Once logged in, you can execute any series of Linux commands or issue one of the following commands to choose a specific release of Asterisk:

  • piafdl -p beta_1881_purple (loads Asterisk 1.8.8.1)
  • piafdl -p beta_1882_purple (loads Asterisk 1.8.8.2)
  • piafdl -p beta_1890_purple (loads Asterisk 1.8.9.0)
  • piafdl -p beta_1891_purple (loads Asterisk 1.8.9.1)
  • piafdl -p beta_1892_purple (loads Asterisk 1.8.9.2)
  • piafdl -p beta_1893_purple (loads Asterisk 1.8.9.3)
  • piafdl -p beta_1001_red (loads Asterisk 10.0.1)
  • piafdl -p beta_1010_red (loads Asterisk 10.1.0)
  • piafdl -p beta_1011_red (loads Asterisk 10.1.1)
  • piafdl -p beta_1012_red (loads Asterisk 10.1.2)
  • piafdl -p beta_1013_red (loads Asterisk 10.1.3)

WARNING: Asterisk 10.1.x releases reportedly break Google Voice! The good news is that the new PIAF deployment policy for Asterisk releases is working. We no longer incorporate the latest Asterisk releases as the default PIAF install before independent testing. You, of course, are free to load and test any of the releases you wish using the commands outlined above.

If you compiled a network driver and wish to resume the installation process, just reboot the server. If you chose a specific flavor of Asterisk, simply accept the license agreement and the customized PIAF2 install will continue. Here’s a quick overview of what happens next.

The PIAF2 installer then syncs the time on your server to NTP, installs the latest yum updates for CentOS 6.2, installs the versions of Asterisk and FreePBX you selected (HINT: Incredible PBX requires FreePBX 2.9) and some other utilities including WebMin, Festival and Flite text-to-speech support for Asterisk, and, of course, the Google Voice GUI which lets you configure PIAF2 to make free calls in the U.S. and Canada in a matter of seconds. Finally the PIAF2 installer patches your system to activate the IPtables firewall for both IPv4 and IPv6 as well as adding Fail2Ban monitoring for Asterisk, SSH, and your Apache web server.

As part of the install procedure, you also will be prompted to choose a version and master password for FreePBX and the other VoIP web utilities. Once your server reboots, you can log into the Linux CLI using your root password to obtain the IP address of your server. Then you can access the PIAF2 web GUI with a browser pointed to the same IP address. To access the FreePBX GUI, choose that icon from the Admin menu. Just click on the User button to get there. When prompted for your username and password, the username is maint. The password will be the FreePBX master password you chose during the PIAF2 install. We’ll walk you through the install steps once we get your USB thumb drive set up.

PBX on a Flash

Here’s the 5-minute drill to get a USB thumb drive loaded with the latest and greatest 32-bit PIAF2 ISO. Once you get that far, follow the PIAF2 install steps outlined below to get your system up and running. In less than an hour, you’ll have a fully functioning, rock-solid reliable PBX that can meet all of your telephony requirements. And, remember, it’s free and always will be™.

Prerequisites. To get everything installed on your USB Flash Drive, you’ll obviously need at least a 1GB Flash Drive. HINT: 2GB flash drives may be cheaper! Next, you’ll need a Windows XP/Vista/7 computer on which to set up the thumb drive. On the Windows PC, you’ll need to download and install the latest, greatest version of ISO2USB from SourceForge. We recommend you also download and install the HP Formatting Utility for flash drives. Finally, you’ll need to download the 32-bit PIAF 2.0.6.2.1 ISO from SourceForge.

Creating USB Flash Drive. Step #1 is to partition and format your USB flash drive as a FAT32 device. Some flash drives are temperamental about the formatting step. We can’t recommend strongly enough using the HP Formatting Utility to make certain you get a reliable, properly formatted thumb drive! Also be careful that you are, in fact, formatting your thumb drive and not your Windows hard disk!

Step #2, once the device is properly formatted, run ISO2USB. You’ll get a screen that looks like what is shown above. Click on the … button to the right of DiskImage ISO and choose the PIAF2 ISO that you downloaded to your Desktop. Make certain that the destination device shown on the bottom line of the display is your USB flash drive. You do not want to accidentally trash your primary drive!

Here’s the tricky part to this. You need to know the drive names of the devices on the target machine where you ultimately will be using this thumb drive. Try these commands on your target machine using a Linux LIVE CD if you’re unsure: dmesg | grep logical AND dmesg | grep sectors. For most modern machines with IDE drives, the names will be sda, sdb, etc. For older machines, they may be hda, hdb. You’ll know if it doesn’t work. 🙂

The gotcha with CentOS 6.x is that, whenever you boot a machine using a USB flash drive with CentOS 6.x, the device names get switched for that boot only. The USB boot device becomes sda even if your hard disk on the system shows up as sda when it is running without a thumb drive. So… in the ISO2USB setup, change the Hard Disk Name to sdb, and change the USB Device Name to sda. For Foxconn hardware and AMD BIOS machines, use sdc instead of sdb. A few other systems use sdd. In all cases, use sda for the USB Device Name. And, as we noted, you’ll know quickly if you made the wrong choice. Just recreate the thumb drive using the next letter in the alphabet. 😉

Once you’ve double-checked your USB destination drive (HINT: the drive size is quite different), choose OK to begin. When the ISO install completes, don’t forget to Eject your USB flash drive before removing it from the Windows PC!

Using the USB Flash Installer. When using the new flash installer, remember that we need to boot your new machine from the thumb drive. On most newer Atom-based computers, you accomplish this by inserting the USB device, turning the machine on, and then pressing F12 during the boot sequence to choose the boot device. You’ll just have to watch the screen of your new computer to see if some other key is used to pull up the boot selection screen. If all else fails, you can adjust the boot sequence in the BIOS settings to boot first from the USB device. If you change your BIOS boot sequence, just remember to remove the device when the initial install of CentOS completes and the PIAF2 reboot sequence begins. If instead you again see the initial PIAF2 install screen warning you that your disk is about to be erased, then remove the thumb drive and reboot the machine once again.

PIAF Installation. Once you’ve booted with your PIAF2 thumb drive, you’ll be prompted to choose an installation method. For most users, simply pressing the Enter key will get things started. Choose a time zone when prompted and then enter a very secure root password for your new server. The installer then will load CentOS 6.2 onto your server. When complete, your server will reboot. Remove the thumb drive at this point, and you’ll be prompted to choose the version of Asterisk to install. See the discussion above for making a selection. If you see a Linux login prompt instead, it means sdb was the wrong device name for your server’s hard disk. Log in as root using the password you set up previously and issue the following commands to decipher the correct device name. Then rebuild your thumb drive using the correct device name and start again.

ls /dev/sd*
ls /dev/dd*

If all went well, after choosing the version of Asterisk to install, you’ll be prompted for a version of FreePBX and a master password for FreePBX. Make it very secure! We recommend FreePBX 2.9 if you plan to use Incredible PBX. Once you’ve made your choices, the PIAF2 installer will load Asterisk, FreePBX, and all the other PBX in a Flash components including Google Voice.

Once your server reboots, log into the Linux CLI using your root password and write down the IP address of your server from the status display.

Security Warning: Always, always, always run PBX in a Flash behind a secure, hardware-based firewall with no PBX in a Flash ports exposed to the Internet! After all, it’s your phone bill.

FreePBX Setup. Most of your life with PBX in a Flash will be spent using the FreePBX web GUI and your favorite browser. Just click on the image below to enlarge. To access the FreePBX GUI, point your browser at the IP address you wrote down. Read the RSS Feed in the PIAF GUI for late-breaking security alerts. Then click on the Users button which will toggle to the Admin menu. Click the FreePBX icon. When prompted for your username and password, the username is maint. The password will be the FreePBX master password you chose in completing the PIAF2 install.

To get a minimal system functioning, here’s the 5-minute drill. You’ll need to set up at least one extension with voicemail, configure a free Google Voice account for free calls in the U.S. and Canada, configure inbound and outbound routes to manage incoming and outgoing calls, and plug your maint password into CallerID Superfecta so that names arrive with your incoming calls. Once you add a phone with your extension credentials, you’re done.

Extension Setup. Now let’s set up an extension to get you started. A good rule of thumb for systems with less than 50 extensions is to reserve the IP addresses from 192.x.x.201 to 192.x.x.250 for your phones. Then you can create extension numbers in FreePBX to match those IP addresses. This makes it easy to identify which phone on your system goes with which IP address and makes it easy for end-users to access the phone’s GUI to add bells and whistles. To create extension 201 (don’t start with 200), click Setup, Extensions, Generic SIP Device, Submit. Then fill in the following blanks USING VERY SECURE PASSWORDS and leaving the defaults in the other fields for the time being.

User Extension … 201
Display Name … Home
Outbound CID … [your 10-digit phone number if you have one; otherwise, leave blank]
Emergency CID … [your 10-digit phone number for 911 ID if you have one; otherwise, leave blank]

Device Options
secret … 1299864Xyz [make this unique AND secure!]
dtmfmode … rfc2833
Voicemail & Directory … Enabled
voicemail password … 14332 [make this unique AND secure!]
email address … yourname@yourdomain.com [if you want voicemail messages emailed to you]
pager email address … yourname@yourdomain.com [if you want to be paged when voicemail messages arrive]
email attachment … yes [if you want the voicemail message included in the email message]
play CID … yes [if you want the CallerID played when you retrieve a message]
play envelope … yes [if you want the date/time of the message played before the message is read to you]
delete Vmail … yes [if you want the voicemail message deleted after it’s emailed to you]
vm options … callback=from-internal [to enable automatic callbacks by pressing 3,2 after playing a voicemail message]
vm context … default

Write down the passwords. You’ll need them to configure your SIP phone.

Extension Security. We cannot overstress the need to make your extension passwords secure. All the firewalls in the world won’t protect you from malicious phone calls on your nickel if you use your extension number or something like 1234 for your extension password if your SIP or IAX ports happen to be exposed to the Internet. Incredible PBX automatically randomizes all of the extension passwords for you.

In addition to making up secure passwords, the latest versions of FreePBX also let you define the IP address or subnet that can access each of your extensions. Use it!!! Once the extensions are created, edit each one and modify the permit field to specify the actual IP address or subnet of each phone on your system. A specific IP address entry should look like this: 192.168.1.142/255.255.255.255. If most of your phones are on a private LAN, you may prefer to use a subnet entry in the permit field like this: 192.168.1.0/255.255.255.0 using your actual subnet.

Courtesy of wordle.net

Adding a Google Voice Trunk. There are lots of trunk providers, and one of the real beauties of having your own PBX is that you don’t have to put all of your eggs in the same basket… unlike the AT&T days. We would encourage you to take advantage of this flexibility. With most providers, you don’t pay anything except when you actually use their service so you have nothing to lose.

For today, we’re going to take advantage of Google’s current offer of free calling in the U.S. and Canada through the end of this year. You also get a free phone number in your choice of area codes. PBX in a Flash now installs a Google Voice module for FreePBX that lets you set up your Google Voice account with PBX in a Flash in just a few seconds once you have your credentials.

Signing Up for Google Voice. You’ll need a dedicated Google Voice account to support PBX in a Flash. The more obscure the username (with some embedded numbers), the better off you will be. This will keep folks from bombarding you with unsolicited Gtalk chat messages, and who knows what nefarious scheme will be discovered using Google messaging six months from now. So keep this account a secret!

We’ve tested this extensively using an existing Gmail account rather than creating a separate account. Take our word for it. Inbound calling is just not reliable. The reason seems to be that Google always chooses Gmail chat as the inbound call destination if there are multiple registrations from the same IP address. So… set up a dedicated Gmail and Google Voice account, and use it exclusively with PBX in a Flash. Google Voice no longer is by invitation only. If you’re in the U.S. or have a friend that is, head over to the Google Voice site and register. If you’re living on another continent, see MisterQ’s posting for some tips on getting set up.

You must choose a telephone number (aka DID) for your new account, or Google Voice calling will not work… in either direction. You also have to tie your Google Voice account to at least one working phone number as part of the initial setup process. Your cellphone number will work just fine. Don’t skip this step either. Just enter the provided confirmation code when you tell Google to place the test call to the phone number you entered. Once the number is registered, you can disable it if you’d like in Settings, Voice Setting, Phones. But…

IMPORTANT: Be sure to enable the Google Chat option as one of your phone destinations in Settings, Voice Setting, Phones. That’s the destination we need for PBX in a Flash to function with Google Voice! Otherwise, inbound and/or outbound calls will fail. If you don’t see this option, you may need to call up Gmail and enable Google Chat there first. Then go back to the Google Voice Settings and enable it. Be sure to try one call each way from Google Chat in Gmail. Then disable Google Chat in GMail for this account. Otherwise, it won’t work with PIAF.

While you’re still in Google Voice Settings, click on the Calls tab. Make sure your settings match these:

  • Call Screening – OFF
  • Call Presentation – OFF
  • Caller ID (In) – Display Caller’s Number
  • Caller ID (Out) – Don’t Change Anything
  • Do Not Disturb – OFF
  • Call Options (Enable Recording) – OFF
  • Global Spam Filtering – ON

Click Save Changes once you adjust your settings. Under the Voicemail tab, plug in your email address so you get notified of new voicemails. Down the road, receipt of a Google Voice voicemail will be a big hint that something has come unglued on your PBX.

Configuring Google Voice Trunk in FreePBX. All trunk configurations now are managed within FreePBX, including Google Voice. This makes it easy to customize PBX in a Flash to meet your specific needs. Click the Setup tab and choose Google Voice in the Third Party Addons. To Add a new Google Voice account, just fill out the form:

Phone number is your 10-digit Google Voice number. Username is your Google Voice account name without @gmail.com. NOTE: You must use a Gmail.com address in the current version of this module! Password is your Google Voice password. NOTE: Don’t use 2-stage password protection in this Google Voice account! Be sure to check all three boxes: Add trunk, Add routes, and Agree to TOS. Then click Submit Changes and reload FreePBX. Down the road, you can add additional Google Voice numbers by clicking Add GoogleVoice Account option in the right margin and repeating the drill. For Google Apps support, see this post on the PIAF Forum.

Outbound Routes. The idea behind multiple outbound routes is to save money. Some providers are cheaper to some places than others. It also provides redundancy which costs you nothing if you don’t use the backup providers. The Google Voice module actually configures an Outbound Route for 10-digit Google Voice calling as part of the automatic setup. If this meets your requirements, then you can skip this step for today.

Inbound Routes. An Inbound Route tells PBX in a Flash how to route incoming calls. The idea here is that you can have multiple DIDs (phone numbers) that get routed to different extensions or ring groups or departments. For today, we’ll build a simple route that directs your Google Voice calls to extension 201. Choose Inbound Routes, leave all of the settings at their default values except enter your 10-digit Google Voice number in the DID Number field. Enable CallerID lookups by choosing CallerID Superfecta in the CID Lookup Source pulldown. Then move to the Set Destination section and choose Extensions in the left pull-down and 201 in the extension pull-down. Now click Submit and save your changes. That will assure that incoming Google Voice calls are routed to extension 201.

IMPORTANT: Before Google Voice calling will actually work, you must restart Asterisk from the Linux command line interface. Log into your server as root and issue this command: amportal restart.

CallerID Superfecta Setup. CallerID Superfecta needs to know your maint password in order to access the necessary modules to retrieve CallerID information for inbound calls. Just click Setup, CID Superfecta, and click on Default in the Scheme listings in the right column. Scroll down to the General Options section and insert your maint password in the Password field. You may also want to enable some of the other providers and adjust the order of the lookups to meet your local needs. Click Agree and Save once you have the settings adjusted.

General Settings. Last, but not least, we need to enter an email address for you so that you are notified when new FreePBX updates are released. Scroll to the bottom of the General Settings screen after selecting it from the left panel. Plug in your email address, click Submit, and save your changes. Done!

Adding Plain Old Phones. Before your new PBX will be of much use, you’re going to need something to make and receive calls, i.e. a telephone. For today, you’ve got several choices: a POTS phone, a softphone, or a SIP phone. Option #1 and the best home solution is to use a Plain Old Telephone or your favorite cordless phone set (with 8-10 extensions) if you purchase a little device known as a Sipura SPA-3102. It’s under $70. Be sure you specify that you want an unlocked device, meaning it doesn’t force you to use a particular service provider. This device also supports connection of your PBX to a standard office or home phone line as well as a telephone.

Configuring a SIP Phone. There are hundreds of terrific SIP telephones and softphones for Asterisk-based systems. Once you get things humming along, you’ll want a real SIP telephone such as the $50 Nortel color videophone we’ve recommended previously. You’ll also find lots of additional recommendations on Nerd Vittles and in the PBX in a Flash Forum. If you’re like us, we want to make damn sure this stuff works before you shell out any money. So, for today, let’s download a terrific (free) softphone to get you started. We recommend X-Lite because there are versions for Windows, Mac, and Linux. So download your favorite from this link. Install and run X-Lite on your Desktop. At the top of the phone, click on the Down Arrow and choose SIP Account Settings, Add. Enter the following information using 201 for your extension and your actual password for extension 201. Then plug in the actual IP address of your PBX in a Flash server instead of 192.168.0.251. Click OK when finished. Your softphone should now show: Available.

Enabling Google Voicemail. Some have requested a way to retain Google’s voicemail system for unanswered calls in lieu of using Asterisk voicemail. The advantage is that Google offers a free transcription service for voicemail messages. To activate this, you’ll need to edit the [googlein] context in extensions_custom.conf in /etc/asterisk. Just modify the last four lines in the context so that they look like this and then restart Asterisk: amportal restart

;exten => s,n(regcall),Answer
;exten => s,n,SendDTMF(1)
exten => s,n(regcall),Set(DIAL_OPTIONS=${DIAL_OPTIONS}aD(:1))
exten => s,n,Goto(from-trunk,gv-incoming,1)

But I Don’t Want to Use Google Voice. If you’d prefer not to use Google Voice at all with PBX in a Flash, that’s okay, too. Here’s how to disable it and avoid the chatter in the Asterisk CLI. Log into your server as root and edit /etc/asterisk/modules.conf. Change the first three lines in the [modules] context so that they look like this. Then restart Asterisk: amportal restart.

autoload=yes
noload => res_jabber.so
noload => chan_gtalk.so

There’s now a patch that automatically adjusts Asterisk to accommodate Google Voice whenever you have added Google Voice extensions to your system. To download and install the patch, visit the PIAF Forum.

Where To Go From Here. We’ve barely scratched the surface of what you can do with your new PBX in a Flash system. If you’re new to all of this, then your next step probably should be the Nerd Vittles’ Incredible PBX 3.0 and Incredible Fax 2.0 tutorial. It’s a 5-minute addition. And, of course, all 50 Asterisk applications in Incredible PBX are free and always will be. Enjoy!

PBX on a Flash

Getting Your Own PIAF Thumb Drive. Some of you have asked about how to obtain your very own PIAF thumb drive. Well, it’s easy. Just make a contribution of $50 or more to the Nerd Vittles and PBX in a Flash projects by clicking the PayPal Donate button at the top of this page, and we’ll get one off to you pronto. And, thanks in advance for your support of freeware and open source projects!

Originally published: Monday, February 20, 2012


Need help with Asterisk? Visit the PBX in a Flash Forum.
Or Try the New, Free PBX in a Flash Conference Bridge.

whos.amung.us If you’re wondering what your fellow man is reading on Nerd Vittles these days, wonder no more. Visit our new whos.amung.us statistical web site and check out what’s happening. It’s a terrific resource both for us and for you.

 

Special Thanks to Our Generous Sponsors


FULL DISCLOSURE: ClearlyIP, Skyetel, Vitelity, DigitalOcean, Vultr, VoIP.ms, 3CX, Sangoma, TelecomsXchange and VitalPBX have provided financial support to Nerd Vittles and our open source projects through advertising, referral revenue, and/or merchandise. As an Amazon Associate and Best Buy Affiliate, we also earn from qualifying purchases. We’ve chosen these providers not the other way around. Our decisions are based upon their corporate reputation and the quality of their offerings and pricing. Our recommendations regarding technology are reached without regard to financial compensation except in situations in which comparable products at comparable pricing are available from multiple sources. In this limited case, we support our sponsors because our sponsors support us.

BOGO Bonaza: Enjoy state-of-the-art VoIP service with a $10 credit and half-price SIP service on up to $500 of Skyetel trunking with free number porting when you fund your Skyetel account. No limits on number of simultaneous calls. Quadruple data center redundancy. $25 monthly minimum spend required. Tutorial and sign up details are here.

The lynchpin of Incredible PBX 2020 and beyond is ClearlyIP components which bring management of FreePBX modules and SIP phone integration to a level never before available with any other Asterisk distribution. And now you can configure and reconfigure your new Incredible PBX phones from the convenience of the Incredible PBX GUI.

VitalPBX is perhaps the fastest-growing PBX offering based upon Asterisk with an installed presence in more than 100 countries worldwide. VitalPBX has generously provided a customized White Label version of Incredible PBX tailored for use with all Incredible PBX and VitalPBX custom applications. Follow this link for a free test drive!
 

Special Thanks to Vitelity. Vitelity is now Voyant Communications and has halted new registrations for the time being. Our special thanks to Vitelity for their unwavering financial support over many years and to the many Nerd Vittles readers who continue to enjoy the benefits of their service offerings. We will keep everyone posted on further developments.
 

Some Recent Nerd Vittles Articles of Interest…

Virtual Utopia: 1-Minute Asterisk Installs with PIAF2-OpenVZ

Monday, February 13, 2012 / 1 Comment on Virtual Utopia: 1-Minute Asterisk Installs with PIAF2-OpenVZ

Thanks to the terrific work of Darrell Dillman, today we have a new OpenVZ template for PBX in a Flash 2™ to introduce. It features the very latest 64-bit CentOS™ 6.2 with Asterisk® 1.8 and FreePBX® 2.9. Using the new OpenVZ template, you can create unlimited virtual machines in about one minute per server! And you can boot your new virtual machines in about the same time. This new PIAF2-OpenVZ template includes the usual PIAF2™ Feature Set including Google Voice for free calling in the U.S. and Canada. Once installed, you can add Incredible PBX 3™ and Incredible Fax 2™ in a few clicks.

One of the real beauties of hosting your own Proxmox server is the flexibility it gives you to create and load a wide variety of virtual machines that each appear to users to be dedicated servers. This could include a dozen Asterisk servers, or it might be a mix of a dedicated Apache server, a Windows Server, an Asterisk server or two, as well as Joomla, Drupal, Zimbra, and many others from this list. The other obvious advantage is cost. Individual Asterisk servers can be had for $300 or less to host a small branch office. But a Proxmox server such as Dell's current offering can host a dozen dedicated systems for about $50 per server.

If you haven't heard of OpenVZ templates before, you've missed one of the real technological breakthroughs of the last decade. Rather than wading through the usual 30-60 minute ISO installation drill, with an OpenVZ template, all of the work is done for you. And it's quick. You can build a dozen PIAF2-Purple systems using an OpenVZ template in the time it takes to bake a pan of slice-and-bake cookies. And it's incredibly easy to then tie all of these systems together using either SIP or IAX trunks. Just follow our previous tutorial. For developers that want to try various Asterisk configurations before implementation and for trainers and others that want to host dedicated Asterisk systems for students, the OpenVZ platform is a perfect fit.

We'll start with the bad news before we get to the really exciting new Asterisk platform we're introducing today. All of the current Proxmox server software that supports OpenVZ virtual machines has a serious security flaw. For that reason, you would only want to run Proxmox behind a hardware-based firewall with no Internet port exposure. If you fail to heed this warning, you run the very real risk of having not only your Promox server compromised but also all of the virtual machines running on it. The good news is that this security flaw does not appear to affect the PBX in a Flash virtual machines which we are introducing today. Since no direct Internet access is required to have a perfectly functioning PIAF2 server, we still strongly recommend never exposing any server to direct Internet access. MORAL: No Internet port exposure for any of your servers means you can sleep like a baby. We recommend Proxmox 1.8 which is a free download from the Proxmox VE web site. To get optimum use from Proxmox, you'll also want a processor in your server that supports Kernel-based Virtual Machines (KVMs). This full virtualization solution requires an x86 processor containing virtualization extensions (Intel VT1 or AMD-V CPU2 is needed). HINT: Most of Dell's servers are not a problem. Regardless of the server you choose, make certain that you check the CPU specs before you buy. Also be aware that, in addition to Proxmox, there are many other OpenVZ platforms from which to choose.

Installing Proxmox. If you go the Dell route, you'll need an external USB CD or DVD drive to install Proxmox. Dell's optical drives aren't supported in the Proxmox boot image. So begin by downloading the Proxmox VE 1.8 ISO image and create your CD. Then boot your new server from the CD (by pressing F11 for the boot selection screen and choosing your USB external drive on Dell servers). Press Return to begin the install, agree to the license agreement, and click Next on the installer screen to begin. Choose your country, time zone, and keyboard layout. Next choose a secure password and provide a valid email address which is used to send you critical alerts from your Proxmox server. Finally, choose a hostname, specify a fixed IP address, netmask, gateway, and DNS servers and then press Next. Three minutes later, you'll have a new Proxmox server. Log in to your server as root and create a directory for your backups: mkdir /backup.

Enabling IPtables Firewall. IPtables works a little differently in the OpenVZ environment. It actually runs on the Proxmox host. There are just two steps to get it working. First, shut down every running VM on your Proxmox server using the web interface. When you're sure they're all stopped and while logged into your Proxmox server as root carefully enter the following two commands. Note that, because of the length, the sed command stretches to several lines which should be unraveled into a single line for the command to execute properly! Using a block-copy from a desktop machine to your SSH session is the safest method.

sed -i 's|ipt_REJECT ipt_tos ipt_limit ipt_multiport iptable_filter iptable_mangle ipt_TCPMSS ipt_tcpmss ipt_ttl ipt_length|ipt_REJECT ipt_tos ipt_TOS ipt_LOG ip_conntrack ipt_limit ipt_multiport iptable_filter iptable_mangle ipt_TCPMSS ipt_tcpmss ipt_ttl ipt_length ipt_state iptable_nat ip_nat_ftp|' /etc/vz/vz.conf

/etc/init.d/vz restart

Don't forget to set the system time on your server: dpkg-reconfigure tzdata

You're finished with the CLI at this point. Now you'll be able to configure IPtables within each of your OpenVZ virtual machines as explained below.

OpenVZ vs. ISO Images. One of the beauties of Proxmox is that it supports two different types of images to create virtual machines. An OpenVZ template is akin to a snapshot of an existing system while an ISO image is identical to the installer you normally would burn onto a CD in order to install a software application on your server. In short, you still have to go through the installation scenario when you create a virtual machine (KVM) from an ISO image. A virtual machine created from an OpenVZ image is ready for use the moment it is created. If you remember when instant-on televisions first were introduced, you'll also appreciate the difference in boot times between OpenVZ and KVM machines which boot an application installed from an ISO in much the same manner as you would experience on a standalone machine.

As with life, there's a dark cloud lurking behind every silver lining, and this is especially true in the Asterisk environment. OpenVZ containers rely upon a shared kernel, the one that actually boots the Proxmox server. KVM containers created from ISO images are self-contained with their own complete operating system and kernel. Thus, zaptel or dahdi cannot be loaded directly from an OpenVZ container. Instead one must rely upon a shared version of zaptel or dahdi loaded on the Proxmox server itself. As it turns out, this is no small feat and certainly not a task for mere mortals. Bottom Line: If you need conferencing or otherwise need a timing source for your Asterisk deployment, you will not want to use the OpenVZ approach at least for now. If you want to try it later, here is the message thread on the PBX in a Flash Forum. On the other hand, if you have more traditional VoIP requirements for your PBX, then the ease of installation and use of the OpenVZ image makes perfect sense. So let's start there assuming you understand the limitations.

Installing PIAF-OpenVZ Template. Using a web browser, download the new PIAF2-OpenVZ image to your Desktop. Once you have the OpenVZ image in hand, point your web browser to your Proxmox server: https://ipaddress. Accept the default certificate and login as root. You'll get a Welcome screen that looks something like what's shown above. Click on the Appliance Template option. In the Upload File section, choose the PIAF2-OpenVZ image on your Desktop and click Upload. Be patient. It's a big file. So go have a cup of coffee. You'll get a prompt when it's completed. You can also do this directly within the Proxmox server by logging in as root and issuing these commands to install the latest PIAF2-OpenVZ template:

cd /var/lib/vz/template/cache/
wget http://nerd.bz/zwU8zb
mv zwU8zb centos-6.2-purple1.8.8-piaf_2.0.6.2-5_amd64.tar.gz

Creating OpenVZ Virtual Machines. Once installed, you can build Asterisk 1.8.8.0 virtual machines to your heart's content... in about a minute apiece. Just choose Virtual Machine, Create to create a new virtual machine using the OpenVZ template you just uploaded. In the Configuration section, choose OpenVZ for the Type and pick your new OpenVZ template from the pulldown list. Fill in a Host Name, Disk Space maximum (in GB), Memory Allocation (1024 recommended), and a very secure (root) Password. The other defaults should be fine. In the Network section of the form, change to the Bridged Ethernet (veth) option which means the VM will obtain its IP address from your DHCP server. Make sure your DNS settings are correct for your LAN or use Google's DNS servers: 8.8.8.8 and 8.8.4.4. Here's how a typical OpenVZ creation form will look. Just click on the image to enlarge.

Once the image is created, start up the virtual machine, wait at least 60 seconds for the system to load, and then click on Open VNC Console. Asterisk will be loaded and running. Verify this on the status display. You can safely ignore the status messages pertaining to IPtables assuming iptables -nL shows that IPtables is functioning properly. You now have a PIAF-Purple base platform running Asterisk 1.8.8.0 and FreePBX 2.9. REMINDER: Be sure you always run both Proxmox AND your virtual machines behind a hardware-based firewall with no port exposure to the Internet!

Before you do anything else, log into your virtual machine using SSH and run passwd-master to secure the passwords for FreePBX GUI access to your system. Also be sure to set the correct time zone3 on your virtual machine:4

mv /etc/localtime /etc/localtime.bak
ln -s /usr/share/zoneinfo/America/Indianapolis /etc/localtime
date

Once you have secured your passwords, you're ready to set up Asterisk to make and receive calls. For the complete 5-minute tutorial, see this Nerd Vittles article. REMINDER: Once you have set up a Google Voice account, created an extension with a secure password, and created an inbound route for your incoming calls, don't forget to reload Asterisk from the CLI or Google Voice calling will fail: amportal restart.

Installing Incredible PBX and Incredible Fax. An alternative before configuring your system is to first install Incredible PBX and Incredible Fax. We recommend it. This gives you a turnkey, full-featured PBX with almost every Asterisk feature available on the planet. While logged into your server as root, issue this command to install Incredible PBX: install-incredpbx3. When the install completes, issue the following command to install Incredible Fax: install-incredfax2. Restart your virtual machine to complete the install.

Asterisk CLI Change. Finally, just a heads up that (once again) the Asterisk Dev Team appears to have changed the default behavior of the Asterisk CLI. With Asterisk 1.8, if you make outbound calls after loading the CLI, you will notice that call progress no longer appears in the CLI. To restore the standard behavior (since Moses), issue the following command: core set verbose 3. 🙄

Securing IPtables with a WhiteList. If you're running your virtual machines behind a hardware-based firewall with no Internet port exposure AND all of those on your private LAN are trusted, you can quit here. Otherwise, you need to lock down the IPtables firewall on your virtual machines to only permit access from trusted IP addresses. As delivered with Incredible PBX, all private IP addresses are authorized and a number of dangerous Internet services also are accessible. Here's how to fix it. Log into each VM and edit /etc/sysconfig/iptables: nano -w iptables. Change the section of entries that look like the following by inserting a # at the beginning of each entry. Once you've added the # characters, your entries should look like this:

#-A INPUT -p tcp -m tcp --dport 22 -j ACCEPT
#-A INPUT -p tcp -m tcp --dport 113 -j ACCEPT
#-A INPUT -p tcp -m tcp --dport 80 -j ACCEPT
#-A INPUT -p tcp -m tcp --dport 443 -j ACCEPT
#-A INPUT -p tcp -m tcp --dport 21 -j ACCEPT
#-A INPUT -p tcp -m tcp --dport 9001 -j ACCEPT
#-A INPUT -p tcp -m tcp --dport 9080 -j ACCEPT
#-A INPUT -p udp -m udp --dport 4569 -j ACCEPT
#-A INPUT -p udp -m udp --dport 5000:5082 -j ACCEPT
#-A INPUT -p udp -m udp --dport 10000:20000 -j ACCEPT
#-A INPUT -p tcp -m tcp --dport 4445 -j ACCEPT
#-A INPUT -p tcp -m tcp --dport 5038 -j ACCEPT

Now scroll down a bit in the file and find the entries that look like the following. NOTE: If you didn't install Incredible PBX, you'll need to manually add these entries:

-A INPUT -s 192.168.0.0/255.255.0.0 -j ACCEPT
-A INPUT -s 172.16.0.0/255.240.0.0 -j ACCEPT
-A INPUT -s 10.0.0.0/255.0.0.0 -j ACCEPT
-A INPUT -s 127.0.0.0/255.0.0.0 -j ACCEPT

Immediately below these private network entries, add additional entries using the actual IP addresses that are needed to administer your virtual machine. Also include the IP addresses of any remote telephones that are not covered by the private LAN entries above. Each entry should look like the following using the actual IP addresses needed:

-A INPUT -s 111.222.111.222 -j ACCEPT

IMPORTANT: Save your changes after making sure you've included an entry for the IP address from which you currently are accessing your server. Otherwise, you will lock yourself out of your server. Then restart IPtables: service iptables restart. Verify that the entries are the way you expect: iptables -nL. Now, with a browser, attempt to access the IP address of your virtual machine from an untrusted IP address, e.g. your cellphone. Then repeat from a trusted IP address. If all is well, you're done.

Solving One-Way Audio Problems. If you experience one-way audio on some of your phone calls, you may need to adjust the settings in /etc/asterisk/sip_custom.conf. Just uncomment the first two lines by removing the semicolons. Then replace 173.15.238.123 with your public IP address, and replace 192.168.0.0 with the subnet address of your private network. There are similar settings in gtalk.conf that can be activated although we've never had to use them. In fact, we've never had to use any of these settings. After making these changes, save the file(s) and restart Asterisk: amportal restart.

Quirks, Gotchas, and Updates. The only quirk you will notice in the current virtual machines is that IP6tables may not be running. We're working on it. For the latest breaking news and updates about PIAF2-OpenVZ, visit this thread on the PIAF Forum. Don't forget your Valentine tomorrow. Enjoy!

Originally published: Monday, February 13, 2012


Need help with Asterisk? Visit the PBX in a Flash Forum.
Or Try the New, Free PBX in a Flash Conference Bridge.

whos.amung.us If you're wondering what your fellow man is reading on Nerd Vittles these days, wonder no more. Visit our new whos.amung.us statistical web site and check out what's happening. It's a terrific resource both for us and for you.

 

Special Thanks to Our Generous Sponsors


FULL DISCLOSURE: ClearlyIP, Skyetel, Vitelity, DigitalOcean, Vultr, VoIP.ms, 3CX, Sangoma, TelecomsXchange and VitalPBX have provided financial support to Nerd Vittles and our open source projects through advertising, referral revenue, and/or merchandise. As an Amazon Associate and Best Buy Affiliate, we also earn from qualifying purchases. We’ve chosen these providers not the other way around. Our decisions are based upon their corporate reputation and the quality of their offerings and pricing. Our recommendations regarding technology are reached without regard to financial compensation except in situations in which comparable products at comparable pricing are available from multiple sources. In this limited case, we support our sponsors because our sponsors support us.

BOGO Bonaza: Enjoy state-of-the-art VoIP service with a $10 credit and half-price SIP service on up to $500 of Skyetel trunking with free number porting when you fund your Skyetel account. No limits on number of simultaneous calls. Quadruple data center redundancy. $25 monthly minimum spend required. Tutorial and sign up details are here.

The lynchpin of Incredible PBX 2020 and beyond is ClearlyIP components which bring management of FreePBX modules and SIP phone integration to a level never before available with any other Asterisk distribution. And now you can configure and reconfigure your new Incredible PBX phones from the convenience of the Incredible PBX GUI.

VitalPBX is perhaps the fastest-growing PBX offering based upon Asterisk with an installed presence in more than 100 countries worldwide. VitalPBX has generously provided a customized White Label version of Incredible PBX tailored for use with all Incredible PBX and VitalPBX custom applications. Follow this link for a free test drive!
 

Special Thanks to Vitelity. Vitelity is now Voyant Communications and has halted new registrations for the time being. Our special thanks to Vitelity for their unwavering financial support over many years and to the many Nerd Vittles readers who continue to enjoy the benefits of their service offerings. We will keep everyone posted on further developments.
 

Some Recent Nerd Vittles Articles of Interest...

  1. Be very careful choosing Intel processors. Even some high-end processors do not support Intel Virtualization Technology. Here's the official list. [↩]
  2. And here is a useful reference for AMD-compatible processors. The AMD WIKI provides the following list of AMD-V compatible processors: "AMD's x86 virtualization extension to the 64-bit x86 architecture is named AMD Virtualization, also known by the abbreviation AMD-V, and is sometimes referred to by the code name 'Pacifica'. AMD processors using Socket AM2, Socket S1, and Socket F include AMD Virtualization support. AMD Virtualization is also supported by release two (8200, 2200 and 1200 series) of the Opteron processors. The third generation (8300 and 2300 series of Opteron processors) will see an update in virtualization technology..." [↩]
  3. Look in /usr/share/zoneinfo for correct time zone name for your closest city. [↩]
  4. Getting the correct time in your VMs can be problematic with Proxmox. If you continually see the wrong time when you issue the date command after starting up your VMs, try this. Log into the Proxmox host and issue the following commands using the correct container number and your local time zone city for your virtual machine:

    vzctl stop 108
    vzctl set 108 --capability sys_time:on --save
    vzctl start 108
    vzctl enter 108
    mv /etc/localtime /etc/localtime.old
    ln -s /usr/share/zoneinfo/America/New_York /etc/localtime
    exit

    [↩]

Introducing Incredible PBX 3.0 and Incredible Fax 2.0

Monday, January 23, 2012 / 1 Comment on Introducing Incredible PBX 3.0 and Incredible Fax 2.0

As Nerd Vittles begins its seventh year, a birthday bash is certainly in order. And today we have not one but two of Tom King's reworked masterpieces to introduce. The PIAF2™ introduction with CentOS 6.2™ and your choice of Asterisk® and FreePBX® versions has certainly brought its share of challenges. But, with the new year, we're finally comfortable recommending everyone make the switch. Almost everything is faster, more stable, and smoother with CentOS 6.2. Yes, the pain is worth the gain. But this new platform also meant significant rewrites of some of our VoIP workhorses, and today everything is finally ready for prime time.

News Flash: Incredible PBX 4.0 is now available with FreePBX 2.10 support!

Coming January 19: Incredible PBX 11 & Incredible Fax for Asterisk 11 and FreePBX 2.11

Incredible PBX 3.0™ brings literally dozens of turnkey Asterisk applications to your PIAF2 server, and the installation process is so simple a monkey could do it. And Incredible Fax 2.0™ delivers free faxing with HylaFax™ and AvantFax® in a setup process that's as simple as pressing the Enter key. When you're finished, you'll have one of the open source wonders of the world with free phone calls and faxing throughout the U.S. and Canada together with almost every Asterisk application ever developed. There's more good news. You don't have to be smarter than a fifth grader to get any of it installed and working reliably with Asterisk. In fact, all of the new installers now are rolled into the base PBX in a Flash 2.0™ installation. Just run two simple scripts, and presto. You're done!

The Incredible PBX 3 Inventory. For those that have never heard of The Incredible PBX, here's the current 3.0 feature set in addition to the base install of PBX in a Flash with the CentOS 6.2, Asterisk 1.8 or 10, FreePBX 2.9, and Apache, SendMail, MySQL, PHP, phpMyAdmin, IPtables Linux firewall, Fail2Ban, and WebMin. Cepstral TTS, Incredible Fax, Hamachi VPN, and Mondo Backups are still just one command away and may be installed using the scripts included with Incredible PBX 3.

What began as a kludgey, dual-call, dual-provider Google Voice implementation to take advantage of Google's free PSTN calling in the U.S. and Canada with Asterisk 1.4 and 1.6 is now a zippy-quick, Gtalk-based calling platform that rivals the best SIP-to-SIP calls on the planet and provides virtually instantaneous PSTN connections to almost anybody, anywhere. Trust us! Except for the price which is still free, you'll never know you weren't connected via Ma Bell's overpriced long-distance lines and neither will the Little Mrs. And, yes, our recommended $50 Nortel SIP videophone is plug-and-play.

Just download the latest 32-bit or 64-bit PBX in a Flash 2.0.6.2 ISO from SourceForge, burn to then boot from the PIAF2 CD, choose the PIAF-Purple option to load Asterisk 1.8 or PIAF-Red to load Asterisk 10, and pick FreePBX 2.9 when prompted. Once the PIAF2 install is completed, just run the new Incredible PBX 3.0 installer: install-incredpbx3. In less than an hour, you'll have a turnkey PBX with a local phone number and free calling in the U.S. and Canada via your own Google Voice account plus dozens and dozens of terrific Asterisk applications to keep you busy exploring for months.

Thanks to its Zero Internet Footprint™ design, Incredible PBX 3 remains the most secure Asterisk-based PBX around. What this means is The Incredible PBX™ has been engineered to sit safely behind a NAT-based, hardware firewall with no port exposure to your actual server. And you won't find a more full-featured Personal Branch Exchange™ at any price.

Did we mention that all of this telephone goodness is still absolutely FREE!

Prerequisites. Here's what we recommend to get started properly:

Installing Incredible PBX 3.0. The installation process is simple and straight-forward. We're down to 3 Easy Steps to Free Calling, and The Incredible PBX will be ready to receive and make free U.S./Canada calls immediately:

1. Install PIAF-Purple & FreePBX 2.9 using the PIAF2 ISO
2. Run Incredible PBX 3 installer
3. Configure Google Voice and a softphone or SIP phone

Installing PBX in a Flash. Here's a quick tutorial to get PBX in a Flash 2 installed. To use Incredible PBX 3, just install the latest 32-bit or 64-bit version of PBX in a Flash 2. Unlike other Asterisk aggregations, PBX in a Flash utilizes a two-step install process. The ISO only installs the CentOS 6.2 operating system. Once CentOS is installed, the server reboots and downloads a payload file that includes Asterisk, FreePBX, and many other VoIP and Linux utilities including all of the new Google Voice components. Just choose the PIAF-Purple or PIAF-Red payload. You'll then be prompted to choose your flavor of FreePBX. Choose FreePBX 2.9. Then set your time zone and set up a password for FreePBX access, and you're all set. As part of the install, yum now will automatically update your operating system with the latest updates for CentOS 6.2.

You can download the 32-bit PIAF2 from SourceForge. Burn the ISO to a CD. Then boot from the installation CD and press the Enter key to begin.

WARNING: This install will completely erase, repartition, and reformat EVERY DISK (including USB flash drives) connected to your system so disable any disk you wish to preserve AND remove any USB flash drives! Press Ctrl-C to cancel.

At the keyboard prompt, tab to OK and press Enter. At the time zone prompt, tab once, highlight your time zone, tab to OK and press Enter. At the password prompt, make up a VERY secure root password. Type it twice. Tab to OK, press Enter. Get a cup of coffee. Come back in about 5 minutes. When the system has installed CentOS 6.2, it will reboot. Remove the CD promptly. After the reboot, choose PIAF-Purple. In less than a minute, you'll be prompted for the FreePBX version you wish to install. Choose FreePBX 2.9 and fill in your choices for the remaining prompts. Then have a 15-minute cup of coffee. After installation is complete, the machine will reboot a second time. You now have a PBX in a Flash base install. On a stand-alone machine, it takes 30-60 minutes. On a virtual machine, it takes about half that time. Log into your server with your root password and write down the server's IP address. You'll need it to access FreePBX with your browser.

NOTE: For previous users of PBX in a Flash, be aware that this new version automatically runs update-programs, update-fixes, and passwd-master for you. So your system is relatively secure out of the box! See the Proxmox cautionary alert in the footnotes to this article!

Configuring Google Voice. You'll need a dedicated Google Voice account to support Incredible PBX 3. If you plan to use the inbound fax capabilities of Incredible Fax 2, then you'll want an additional Google Voice line that can be routed to the FAX miscellaneous destination using FreePBX. The more obscure the username (with some embedded numbers), the better off you will be. This will keep folks from bombarding you with unsolicited Gtalk chat messages, and who knows what nefarious scheme will be discovered using Google messaging six months from now. So keep this account a secret!

We've tested this extensively using an existing Gmail account, and inbound calling is just not reliable. The reason seems to be that Google always chooses Gmail chat as the inbound call destination if there are multiple registrations from the same IP address. So, be reasonable. Do it our way! Set up a dedicated Gmail and Google Voice account, and use it exclusively with Incredible PBX 3. Google Voice no longer is by invitation only so, if you're in the U.S. or have a friend that is, head over to the Google Voice site and register. If you're living on another continent, see MisterQ's posting for some tips on getting set up.

You must choose a telephone number (aka DID) for your new account, or Google Voice calling will not work... in either direction. Google used to permit outbound Gtalk calls using a fake CallerID, but that obviously led to abuse so it's over! You also have to tie your Google Voice account to at least one working phone number as part of the initial setup process. Your cellphone number will work just fine. Don't skip this step either. Just enter the provided 2-digit confirmation code when you tell Google to place the test call to the phone number you entered. Once the number is registered, you can disable it if you'd like in Settings, Voice Setting, Phones. But...

IMPORTANT: Be sure to enable the Google Chat option as one of your phone destinations in Settings, Voice Setting, Phones. That's the destination we need for The Incredible PBX to work its magic! Otherwise, all inbound and outbound calls will fail. If you don't see this option, you may need to call up Gmail and enable Google Chat there first. Then go back to the Google Voice Settings.

While you're still in Google Voice Settings, click on the Calls tab. Make sure your settings match these:

  • Call Screening - OFF
  • Call Presentation - OFF
  • Caller ID (In) - Display Caller's Number
  • Caller ID (Out) - Don't Change Anything
  • Do Not Disturb - OFF
  • Call Options (Enable Recording) - OFF
  • Global Spam Filtering - ON

Click Save Changes once you adjust your settings. Under the Voicemail tab, plug in your email address so you get notified of new voicemails. Down the road, receipt of a Google Voice voicemail will be a big hint that something has come unglued on your PBX.

Incredible PBX 3.0 Installation. Log into your server as root and issue the following commands to run The Incredible PBX 3 installer:

install-incredpbx3

When The Incredible PBX install begins, you'll be prompted for your FreePBX maint password. This is required to properly configure CallerID Superfecta for you. Your credentials never leave your server!

Now have another 15-minute cup of coffee. While you're waiting just make sure that you've heeded our advice and installed your server behind a hardware-based firewall. No ports need to be opened on your firewall to support Incredible PBX. Leave it that way!

One final word of caution is in order regardless of your choice of providers: Do NOT use special characters in any provider passwords, or nothing will work!

FINAL STEP. Once the Incredible PBX install completes, be sure to download the latest updates and patches for PBX in a Flash and Incredible. Just issue the following commands:

update-programs
update-fixes

Logging in to FreePBX 2.9. Using a web browser, you access the FreePBX GUI by pointing your browser to the IP address of your Incredible PBX. Click on the Users tab. It will change to Admin. Now click the FreePBX button. When prompted for a username, it's maint. When prompted for the password, it's whatever you set up as your maint password when you installed Incredible PBX 3. If you forget it, you can always reset it by logging into your server as root and running passwd-master.

Configuring Google Voice Trunks in FreePBX. All trunk configurations now are managed within FreePBX, including Google Voice. This makes it easy to customize your Incredible PBX to meet your specific needs. If you plan to use Google Voice, here's how to quickly configure one or more Google Voice trunks within FreePBX. After logging into FreePBX with your browser, click the Setup tab and choose Google Voice in the Third Party Addons. To Add a new Google Voice account, just fill out the form:

Phone number is your 10-digit Google Voice number. Username is your Google Voice account name without @gmail.com. NOTE: You must use a Gmail.com address in the current version of this module! Password is your Google Voice password. NOTE: Don't use 2-stage password protection in this Google Voice account! Be sure to check all three boxes: Add trunk, Add routes, and Agree to TOS. Then click Submit Changes and reload FreePBX. You can add additional Google Voice numbers by clicking Add GoogleVoice Account option in the right margin and repeating the drill.

While you're still in FreePBX, choose Setup, Extensions, and click on the 701 extension. Write down your extension password which you'll need to configure a phone in a minute.

IMPORTANT LAST STEP: Google Voice will not work unless you restart Asterisk from the Linux command line at this juncture. Using SSH, log into your server as root and issue the following command: amportal restart.

Incredible Fax 2 Installation. If you want the added convenience of having your Incredible PBX double as a free fax machine, run install-incredfax2 after the Incredible PBX 3 install completes. Plug in your email address for delivery of incoming faxes and enter your home area code when prompted. For every other prompt, just press the Enter key. If you'd like to also add the optional OCR utility, just choose it when prompted. For complete documentation, see this Nerd Vittles article. Don't forget that a REBOOT OF YOUR SERVER is requiredwhen the install is finished, or faxing won't work! Then log in through the PIAF GUI using maint:password. Be sure to change your password!

Also be sure to set up a second, dedicated Google Voice number if you want support for inbound faxing. Once the Google Voice credentials are configured in FreePBX for the additional Google Voice line, simply add an Inbound Route for this DID to point to the FAX Misc. Destination that comes preconfigured with Incredible PBX 3. Substitute your 10-digit Google Voice number for the DID number shown below. Save your entries and reload FreePBX.

Extension Password Discovery. If you're too lazy to look up your extension 701 password using the FreePBX GUI, you can log into your server as root and issue the following command to obtain the password for extension 701 which we'll need to configure your softphone or color videophone in the next step:

mysql -uroot -ppassw0rd -e"select id,data from asterisk.sip where id='701' and keyword='secret'"

The result will look something like the following where 701 is the extension and 18016 is the randomly-generated extension password exclusively for your Incredible PBX:

+-----+-------+
id         data
+-----+-------+
701      18016
+-----+-------+

Configuring a SIP Phone. There are hundreds of terrific SIP telephones and softphones for Asterisk-based systems. Once you get things humming along, you'll want a real SIP telephone such as the $50 Nortel color videophone we've recommended above. You'll also find lots of additional recommendations on Nerd Vittles and in the PBX in a Flash Forum. If you're like us, we want to make damn sure this stuff works before you shell out any money. So, for today, let's download a terrific (free) softphone to get you started. We recommend X-Lite because there are versions for Windows, Mac, and Linux. So download your favorite from this link. Install and run X-Lite on your Desktop. At the top of the phone, click on the Down Arrow and choose SIP Account Settings, Add. Enter the following information using your actual password for extension 701 and the actual IP address of your Incredible PBX server instead of 192.168.0.251. Click OK when finished. Your softphone should now show: Available.

Incredible PBX Test Flight. The proof is in the pudding as they say. So let's try two simple tests. First, let's place an outbound call. Using the softphone, dial your 10-digit cellphone number. Google Voice should transparently connect you. Answer the call and make sure you can send and receive voice on both phones. Second, from another phone, call the Google Voice number that you've dedicated to The Incredible PBX. Your softphone should begin ringing shortly. Answer the call, press 1 to accept the call, and then make sure you can send and receive voice on both phones. Hang up. If everything is working, congratulations!

Here's a brief video demonstration showing how to set up a softphone to use with your Incredible PBX, and it also walks you through several of the dozens of Asterisk applications included in your system.

Solving One-Way Audio Problems. If you experience one-way audio on some of your phone calls, you may need to adjust the settings in /etc/asterisk/sip_custom.conf. Just uncomment the first two lines by removing the semicolons. Then replace 173.15.238.123 with your public IP address, and replace 192.168.0.0 with the subnet address of your private network. There are similar settings in gtalk.conf that can be activated although we've never had to use them. In fact, we've never had to use any of these settings. After making these changes, save the file(s) and restart Asterisk with the command: amportal restart.

Learn First. Explore Second. Even though the installation process has been completed, we strongly recommend you do some reading before you begin your VoIP adventure. VoIP PBX systems have become a favorite target of the hackers and crackers around the world and, unless you have an unlimited bank account, you need to take some time learning where the minefields are in today's VoIP world. Start by reading our Primer on Asterisk Security. We've secured all of your passwords except your root password and your passwd-master password. We're assuming you've put very secure passwords on those accounts as if your phone bill depended upon it. It does! Also read our PBX in a Flash and VPN in a Flash knols. If you're still not asleep, there's loads of additional documentation on the PBX in a Flash documentation web site.

Choosing a VoIP Provider for Redundancy. Nothing beats free when it comes to long distance calls. But nothing lasts forever. And, in the VoIP World, redundancy is dirt cheap. So we strongly recommend you set up another account with Vitelity using our special link below. This gives your PBX a secondary way to communicate with every telephone in the world, and it also gets you a second real phone number for your new system... so that people can call you. Here's how it works. You pay Vitelity a deposit for phone service. They then will bill you $3.99 a month for your new phone number. This $3.99 also covers the cost of unlimited inbound calls (two at a time) delivered to your PBX for the month. For outbound calls, you pay by the minute and the cost is determined by where you're calling. If you're in the U.S., outbound calls to anywhere in the U.S. are a little over a penny a minute. If you change your mind about Vitelity and want a refund of the balance in your account, all you have to do is ask. The trunks for Vitelity already are preconfigured with The Incredible PBX. Just insert your credentials using FreePBX and uncheck the Disable Trunk checkbox. Then add the Vitelity trunk as the third destination for your default outbound route. That's it. Congratulations! You now have a totally redundant phone system.

We've also included Trunk configurations for a dozen of our favorite hosting providers to get you started. You can sign up for service with any of them, insert your credentials in the existing trunk, uncheck the Disable Trunk checkbox, and then adjust your outbound route and add an inbound route for your new DID (if you get one).

Stealth AutoAttendant. When incoming calls arrive, the caller is greeted with a welcoming message from Allison which says something like "Thanks for calling. Please hold a moment while I locate someone to take your call." To the caller, it's merely a greeting. To those "in the know," it's actually an AutoAttendant (aka IVR system) that gives you the opportunity to press a button during the message to trigger the running of some application on your Incredible PBX. As configured, the only option that works is 0 which fires up the Nerd Vittles Apps IVR. It's quite easy to add additional features such as voicemail retrieval or DISA for outbound calling. Just edit the MainIVR option in FreePBX under Setup, IVR. Keep in mind that anyone (anywhere in the world) can choose these options. So be extremely careful not to expose your system to security vulnerabilities by making certain that any options you add have very secure passwords! It's your phone bill. 😉

Configuring Email. You're going to want to be notified when updates are available for FreePBX, and you may also want notifications when new voicemails arrive. Everything already is set up for you except actually entering your email notification address. Using a web browser, open the FreePBX GUI by pointing your browser to the IP address of your Incredible PBX. Then click Administration and choose FreePBX. To set your email address for FreePBX updates, go to Setup, General Settings and scroll to the bottom of the screen. To configure emails to notify you of incoming voicemails, go to Setup, Extensions, 701 and scroll to the bottom of the screen. Then follow your nose. Be sure to reload FreePBX when prompted after saving your changes.

A Word About Security. Security matters to us, and it should matter to you. Not only is the safety of your system at stake but also your wallet and the safety of other folks' systems. Our only means of contacting you with security updates is through the RSS Feed that we maintain for the PBX in a Flash project. This feed is prominently displayed in the web GUI which you can access with any browser pointed to the IP address of your server. Check It Daily! Or add our RSS Feed to your favorite RSS Reader. We also recommend you follow @NerdUno on Twitter. We'll keep you entertained and provide immediate notification of security problems that we hear about. Be safe!

Enabling Google Voicemail. Some have requested a way to retain Google's voicemail system for unanswered calls in lieu of using Asterisk voicemail. The advantage is that Google offers a free transcription service for voicemail messages. To activate this, you'll need to edit the [googlein] context in extensions_custom.conf in /etc/asterisk. Just modify the last four lines in the context so that they look like this and then restart Asterisk: amportal restart

;exten => s,n(regcall),Answer
;exten => s,n,SendDTMF(1)
exten => s,n(regcall),Set(DIAL_OPTIONS=${DIAL_OPTIONS}aD(:1))
exten => s,n,Goto(from-trunk,gv-incoming,1)

But I Don't Want to Use Google Voice. If you'd prefer not to use Google Voice at all with PBX in a Flash, that's okay, too. Here's how to disable it and avoid the chatter in the Asterisk CLI. Log into your server as root and edit /etc/asterisk/modules.conf. Change the first three lines in the [modules] context so that they look like this. Then restart Asterisk: amportal restart.

autoload=yes
noload => res_jabber.so
noload => chan_gtalk.so

There's now a patch that automatically adjusts Asterisk to accommodate Google Voice whenever you have added Google Voice extensions to your system. To download and install the patch, visit the PIAF Forum.

Kicking the Tires. OK. That's enough tutorial for today. Let's play. Using your new softphone, begin your adventure by dialing these extensions:

  • D-E-M-O - Incredible PBX Demo (running on your PBX)
  • 1234*1061 - Nerd Vittles Demo via ISN FreeNum connection to NV
  • 17476009082*1089 - Nerd Vittles Demo via ISN to Google/Gizmo5
  • Z-I-P - Enter a five digit zip code for any U.S. weather report
  • 6-1-1 - Enter a 3-character airport code for any U.S. weather report
  • 5-1-1 - Get the latest news and sports headlines from Yahoo News
  • T-I-D-E - Get today's tides and lunar schedule for any U.S. port
  • F-A-X - Send a fax to an email address of your choice
  • 4-1-2 - 3-character phonebook lookup/dialer with AsteriDex
  • M-A-I-L - Record a message and deliver it to any email address
  • C-O-N-F - Set up a MeetMe Conference on the fly
  • 1-2-3 - Schedule regular/recurring reminder (PW: 12345678)
  • 2-2-2 - ODBC/Timeclock Lookup Demo (Empl No: 12345)
  • 2-2-3 - ODBC/AsteriDex Lookup Demo (Code: AME)
  • Dial *68 - Schedule a hotel-style wakeup call from any extension
  • 1061*1061 - PIAF Support Conference Bridge (Conf#: 1061)
  • 882*1061 - VoIP Users Conference every Friday at Noon (EST)

PBX in a Flash SQLite Registry. Last, but not least, we want to introduce you to the new PBX in a Flash Registry which uses SQLite, a zero-configuration SQL-compatible database engine. After logging into your server as root, just type show-registry for a listing of all of the applications, versions, and install dates of everything on your new server. Choosing the A option will generate registry.txt in the /root folder while the other options will let you review the applications by category on the screen. For example, the G option displays all of The Incredible PBX add-ons that have been installed. Here's the complete list of options:

  • A - Write the contents of the registry to registry.txt
  • B - PBX in a Flash install details
  • C - Extra programs install details
  • D - Update-fixes status and details
  • E - RPM install details
  • F - FreePBX modules install details
  • G - Incredible PBX install details
  • Q - Quit this program

And here's a sample from an install we recently completed.

Special Thanks. It's hard to know where to start in expressing our gratitude for all of the participants that made today's incredibly simple-to-use product possible. To Philippe Sultan and the rest of the Asterisk development team, thank you for finally making Jabber jabber with Asterisk. To Leif Madsen, our special thanks for your early pioneering work with Gtalk and Jabber which got this ball rolling. To Philippe Lindheimer, Tony Lewis, and the rest of the FreePBX development team, thanks for FreePBX 2.9 which really makes Asterisk shine. To Lefteris Zafiris, thank you for making Flite work with Asterisk 1.8 thereby preserving all of the Nerd Vittles text-to-speech applications. To Darren Sessions, thanks for whipping app_swift into shape and restoring Cepstral and commercial TTS applications to the land of the living with Asterisk 1.8. And to our pal, Tom King, we couldn't have done it without you. You rolled up your sleeves and really made CentOS 6 and Asterisk 1.8 and 10 sit up and bark. No one will quite understand what an endeavor that is until they try it themselves. You won't find another CentOS 6 implementation of Asterisk, and Tom has made it look incredibly easy. It wasn't! And, last but not least, to our dozens of beta testers, THANK YOU! We've implemented almost all of your suggestions.

Additional Goodies. Be sure to log into your server as root and look through all of the free scripts that are included. Just type: help-pbx.

Don't forget to List Yourself in Directory Assistance so everyone can find you by dialing 411. And add your new number to the Do Not Call Registry to block telemarketing calls. Or just call 888-382-1222 from your new number. Enjoy!

Originally published: Monday, January 23, 2012

Support Issues. With any application as sophisticated as this one, you're bound to have questions. Blog comments are a terrible place to handle support issues although we welcome general comments about our articles and software. If you have particular support issues, we encourage you to get actively involved in the PBX in a Flash Forums. It's the best Asterisk tech support site in the business, and it's all free! We maintain a thread with Information, Patches and Bug Fixes for Incredible PBX. Please have a look. Unlike some forums, ours is extremely friendly and is supported by literally hundreds of Asterisk gurus and thousands of ordinary users just like you. You won't have to wait long for an answer to your question.


Need help with Asterisk? Visit the PBX in a Flash Forum.
Or Try the New, Free PBX in a Flash Conference Bridge.

 

Special Thanks to Our Generous Sponsors


FULL DISCLOSURE: ClearlyIP, Skyetel, Vitelity, DigitalOcean, Vultr, VoIP.ms, 3CX, Sangoma, TelecomsXchange and VitalPBX have provided financial support to Nerd Vittles and our open source projects through advertising, referral revenue, and/or merchandise. As an Amazon Associate and Best Buy Affiliate, we also earn from qualifying purchases. We’ve chosen these providers not the other way around. Our decisions are based upon their corporate reputation and the quality of their offerings and pricing. Our recommendations regarding technology are reached without regard to financial compensation except in situations in which comparable products at comparable pricing are available from multiple sources. In this limited case, we support our sponsors because our sponsors support us.

BOGO Bonaza: Enjoy state-of-the-art VoIP service with a $10 credit and half-price SIP service on up to $500 of Skyetel trunking with free number porting when you fund your Skyetel account. No limits on number of simultaneous calls. Quadruple data center redundancy. $25 monthly minimum spend required. Tutorial and sign up details are here.

The lynchpin of Incredible PBX 2020 and beyond is ClearlyIP components which bring management of FreePBX modules and SIP phone integration to a level never before available with any other Asterisk distribution. And now you can configure and reconfigure your new Incredible PBX phones from the convenience of the Incredible PBX GUI.

VitalPBX is perhaps the fastest-growing PBX offering based upon Asterisk with an installed presence in more than 100 countries worldwide. VitalPBX has generously provided a customized White Label version of Incredible PBX tailored for use with all Incredible PBX and VitalPBX custom applications. Follow this link for a free test drive!
 

Special Thanks to Vitelity. Vitelity is now Voyant Communications and has halted new registrations for the time being. Our special thanks to Vitelity for their unwavering financial support over many years and to the many Nerd Vittles readers who continue to enjoy the benefits of their service offerings. We will keep everyone posted on further developments.
 

  1. If you use the recommended Acer Aspire Revo, be advised that it does NOT include a CD/DVD drive. You will need an external USB CD/DVD drive to load the software. Some of these work with CentOS, and some don't. Most HP and Sony drives work; however, we strongly recommend you purchase an external DVD drive from a merchant that will accept returns, e.g. Best Buy, WalMart, Office Depot, Office Max, Staples. You also can run Incredible PBX 3 on a virtual machine such as the free Proxmox server. A security vulnerability has been reported in the Proxmox browser so be sure to run your server behind a secure, hardware-based firewall with no port exposure to the actual Proxmox server from the Internet. [↩]

Introducing PBX in a Flash 2 with CentOS 6.2

Friday, January 20, 2012 / 2 Comments on Introducing PBX in a Flash 2 with CentOS 6.2

Today we're delighted to introduce the ultimate Asterisk® platform. It's the all new PBX in a Flash 2™ featuring CentOS® 6.2 and your choice of Asterisk 1.8.8.0 or 10 plus FreePBX® 2.8, 2.9, or 2.10. No other platform gives YOU the flexibility to design a telephony platform that meets your unique requirements. And, of course, no other platform includes any version of CentOS 6, much less 6.2.

Featuring superior scalability, improved performance, better resource management, and unmatched device support, PBX in a Flash 2.0.6.2 brings you the most versatile Asterisk platform on the planet with the latest and greatest releases of virtually every major open source product in the marketplace. And you can choose either the 32-bit or 64-bit platform. For those needing additional Asterisk customization, PIAF2 also provides direct access to Asterisk's menuconfig system which lets you tailor the selection of Asterisk modules you wish to deploy. And, of course, PIAF2 continues to provide the only turnkey Google Voice solution providing immediate free calling throughout the U.S. and Canada. We'll walk you through the 2-minute drill to deploy Google Voice for inbound and outbound calling with FreePBX. And, yes, Incredible PBX 2.9 is fully compatible with the 32-bit release of PIAF 2.0.6.2!

Our special tip of the hat again goes to Tom King, who has spent the better part of four months integrating PIAF2 into the new CentOS 6 releases, three of them to be exact. To suggest that this was not a job for mere mortals doesn't begin to paint the picture of this long and winding road. The good news is we think you'll be delighted with the results. The PBX in a Flash install process now has been streamlined into three distinct components.

After downloading the ISO and burning a CD (32-bit) or DVD (64-bit) to install your new server, here's how it works. First, you get to choose the file system for your new CentOS server. The PIAF2 installer will whir away for about 15 minutes installing CentOS 6.2. When your system reboots, remove the install disk and Phase 2 begins. Here you get to choose your flavor of Asterisk to deploy. We continue to recommend PIAF2-Purple as the stable product for all but pioneers, but Asterisk 10 is out of beta, and we offer you the option of installing it if you wish.

By default with PIAF2, you get your choice of Asterisk 1.8.8.0 or 10.0.0 as well as FreePBX 2.8, 2.9, or 2.10. With the standard PIAF2 ISO installer, you also have the option of exiting to the Linux command prompt to compile a network driver or to select from a broad selection of newer Asterisk releases. If you choose this option, you'll be prompted to log into your server as root with the root password you chose initially. Once logged in, you can execute any series of Linux commands or issue one of the following commands to choose a specific release of Asterisk:

  • piafdl -p beta_1880_purple (loads Asterisk 1.8.8.10)
  • piafdl -p beta_1881_purple (loads Asterisk 1.8.8.1)
  • piafdl -p beta_1882_purple (loads Asterisk 1.8.8.2)
  • piafdl -p beta_1890_purple (loads Asterisk 1.8.9.0)
  • piafdl -p beta_1891_purple (loads Asterisk 1.8.9.1)
  • piafdl -p beta_1892_purple (loads Asterisk 1.8.9.2)
  • piafdl -p beta_1893_purple (loads Asterisk 1.8.9.3)
  • piafdl -p beta_1001_red (loads Asterisk 10.0.1)
  • piafdl -p beta_1010_red (loads Asterisk 10.1.0)
  • piafdl -p beta_1011_red (loads Asterisk 10.1.1)
  • piafdl -p beta_1012_red (loads Asterisk 10.1.2)
  • piafdl -p beta_1013_red (loads Asterisk 10.1.3)

WARNING: Asterisk 10.1.x releases reportedly break Google Voice! The good news is that the new PIAF deployment policy for Asterisk releases is working. We no longer incorporate the latest Asterisk releases as the default PIAF install before independent testing. You, of course, are free to load and test any of the releases you wish using the commands outlined above.

If you compiled a network driver and wish to resume the installation process, just reboot the server. If you chose a specific flavor of Asterisk, simply accept the license agreement and the customized PIAF2 install will continue.

Within a minute or so, your chosen Asterisk installer will load. In Phase 3 (the Config Module), you'll pick your flavor of FreePBX and choose a password for access, set your time zone, and decide whether you want to further customize Asterisk using menuconfig.

If you want to also install Incredible PBX 2.9, be sure to use the 32-bit PIAF2 ISO and choose Asterisk 1.8 and FreePBX 2.9.

Otherwise, the choices are up to you. Once you've made your selections, everything else installs on autopilot unless you opted to use menuconfig. If so, come back in 15 minutes and tailor away. Then press x to save your settings and finish the install. Depending on the speed of your server or virtual machine, the complete install usually takes 30-60 minutes. It's not the fastest Asterisk install on the planet. But, as you learned in high school, faster isn't always better. With PIAF2, you get a fully customized Asterisk environment with the very latest CentOS 6.2 updates.

After the final reboot, you'll have a working PIAF2 server. Open up FreePBX with a browser, enter your Google Voice credentials, create an extension, link an inbound route to that extension to accept calls, restart Asterisk from the command prompt, and you'll have a fully operational PBX in less than 2 minutes.

Creating a PIAF2 Install Disk. To get started, download the PIAF2 ISO of your choice from SourceForge.

Once you have the ISO image in hand, the next step is to burn the ISO image to a DVD. The 32-bit ISO still will fit on a CD if you prefer. If you've never done it before, here's a DVD tutorial that will show you how on either a Windows machine or a Mac. If your machine lacks a CD/DVD drive, there's now a simple procedure for building a USB Flash Drive installer.

Using PIAF2 with Proxmox. For those using Proxmox to host PIAF2 virtual machines, the easiest approach is to log into your server as root, change to the /var/lib/vz/template/iso directory, and issue a wget command to download the SourceForge image of your choice. In building KVM virtual machines with Proxmox, you'll need to allocate at least 768MB of RAM (1024MB recommended) for each image. CentOS 6 has a much larger memory footprint than CentOS 5. Reminder: Be absolutely sure Proxmox is sitting behind a secure hardware-based firewall. It is NOT secure on the open Internet!

Atom-based PC Platform. Unless you're using PIAF2 on a virtual hosting platform, you'll need a dedicated PC. For the least expensive hardware alternative, pick up an Atom-based PC. We previously have recommended against an EEE PC because of the network driver incompatibility with CentOS 5. We'll have to leave it to the pioneers to tell us whether this still applies with CentOS 6. We do know that the refurbished Acer desktops work fine. Someone has actually tested them! And they can easily support a small business with dozens of phones. See these performance benchmarks for details.

Another terrific option (if you hurry) is this refurbished Dell GX620 for $79.99. These won't last long.

FreePBX Setup. After the PIAF2 install finishes, your server will reboot once again. Log into the Linux CLI as root using your root password. Write down the IP address of your server from the status display and verify that everything installed properly. Note that Samba is disabled by default. If you want to use it for Windows Networking, run configure-samba once your server is up and running.

Most of your life with PBX in a Flash will be spent using the FreePBX web GUI and your favorite browser. Just point your browser to the IP address of your server and review the PIAF RSS Feed (as shown above). We recommend checking this RSS Feed daily by pointing your browser to the IP address of your server. The RSS Feed is displayed in the left column of the GUI and will alert you to any newly discovered security vulnerabilities in CentOS, Asterisk, FreePBX, or PIAF2. Click on the Users tab to change to the Admin panel, and then select FreePBX to load the FreePBX GUI.

You also can access the FreePBX GUI directly by pointing your browser to the IP address of your PIAF2 server: http://ipaddress/admin. When prompted for your username and password, the username is maint. The password will be the FreePBX master password you chose in Phase 3 of the PIAF install.

To get a minimal system functioning to make and receive calls, here's the 2-minute drill. You'll need to set up at least one extension with voicemail and configure a free Google Voice account for free calls in the U.S. and Canada. Next, configure inbound and outbound routes to manage incoming and outgoing calls. Finally, add a phone with your extension credentials, and you're done.

A Word About Security. PBX in a Flash has been engineered to run on a server sitting safely behind a hardware-based firewall with NO port exposure from the Internet. Leave it that way! It's your wallet and phone bill that are at stake.

Extension Setup. Now let's set up an extension to get you started. A good rule of thumb for systems with less than 50 extensions is to reserve the IP addresses from 192.x.x.201 to 192.x.x.250 for your phones. Then you can create extension numbers in FreePBX to match those IP addresses. This makes it easy to identify which phone on your system goes with which IP address and makes it easy for end-users to access the phone's GUI to add bells and whistles. To create extension 201 (don't start with 200), click Setup, Extensions, Generic SIP Device, Submit. Then fill in the following blanks USING VERY SECURE PASSWORDS and leaving the defaults in the other fields for the time being.

User Extension ... 201
Display Name ... Home
Outbound CID ... [your 10-digit phone number if you have one; otherwise, leave blank]
Emergency CID ... [your 10-digit phone number for 911 ID if you have one; otherwise, leave blank]

Device Options
secret ... 1299864Xyz [make this unique AND secure!]
dtmfmode ... rfc2833
Voicemail & Directory ... Enabled
voicemail password ... 14332 [make this unique AND secure!]
email address ... yourname@yourdomain.com [if you want voicemail messages emailed to you]
pager email address ... yourname@yourdomain.com [if you want to be paged when voicemail messages arrive]
email attachment ... yes [if you want the voicemail message included in the email message]
play CID ... yes [if you want the CallerID played when you retrieve a message]
play envelope ... yes [if you want the date/time of the message played before the message is read to you]
delete Vmail ... yes [if you want the voicemail message deleted after it's emailed to you]
vm options ... callback=from-internal [to enable automatic callbacks by pressing 3,2 after playing a voicemail message]
vm context ... default

Write down the passwords. You'll need them to configure your SIP phone.

Extension Security. We cannot overstress the need to make your extension passwords secure. All the firewalls in the world won't protect you from malicious phone calls on your nickel if you use your extension number or something like 1234 for your extension password if your SIP or IAX ports happen to be exposed to the Internet.

In addition to making up secure passwords, the latest versions of FreePBX also let you define the IP address or subnet that can access each of your extensions. Use it!!! Once the extensions are created, edit each one and modify the permit field to specify the actual IP address or subnet of each phone on your system. A specific IP address entry should look like this: 192.168.1.142/255.255.255.255. If most of your phones are on a private LAN, you may prefer to use a subnet entry in the permit field like this: 192.168.1.0/255.255.255.0 using your actual subnet.

Courtesy of wordle.net

Adding a Google Voice Trunk. There are lots of trunk providers, and one of the real beauties of having your own PBX is that you don't have to put all of your eggs in the same basket... unlike the AT&T days. We would encourage you to take advantage of this flexibility. With most providers, you don't pay anything except when you actually use their service so you have nothing to lose.

For today, we're going to take advantage of Google's current offer of free calling in the U.S. and Canada through the end of 2012. You also get a free phone number in your choice of area codes. PBX in a Flash now installs a Google Voice module for FreePBX that lets you set up your Google Voice account with PBX in a Flash in just a few seconds once you have your credentials.

Signing Up for Google Voice. You'll need a dedicated Google Voice account to support PBX in a Flash. The more obscure the username (with some embedded numbers), the better off you will be. This will keep folks from bombarding you with unsolicited Gtalk chat messages, and who knows what nefarious scheme will be discovered using Google messaging six months from now. So keep this account a secret!

We've tested this extensively using an existing Gmail account rather than creating a separate account. Take our word for it. Inbound calling is just not reliable. The reason seems to be that Google always chooses Gmail chat as the inbound call destination if there are multiple registrations from the same IP address. So... set up a dedicated Gmail and Google Voice account, and use it exclusively with PBX in a Flash. Google Voice no longer is by invitation only. If you're in the U.S. or have a friend that is, head over to the Google Voice site and register. If you're living on another continent, see MisterQ's posting for some tips on getting set up.

You must choose a telephone number (aka DID) for your new account, or Google Voice calling will not work... in either direction. You also have to tie your Google Voice account to at least one working phone number as part of the initial setup process. Your cellphone number will work just fine. Don't skip this step either. Just enter the provided confirmation code when you tell Google to place the test call to the phone number you entered. Once the number is registered, you can disable it if you'd like in Settings, Voice Setting, Phones. But...

IMPORTANT: Be sure to enable the Google Chat option as one of your phone destinations in Settings, Voice Setting, Phones. That's the destination we need for PBX in a Flash to function with Google Voice! Otherwise, inbound and/or outbound calls will fail. If you don't see this option, you may need to call up Gmail and enable Google Chat there first. Then go back to the Google Voice Settings and enable it. Be sure to try one call each way from Google Chat in Gmail. Then disable Google Chat in GMail for this account. Otherwise, it won't work with PIAF.

While you're still in Google Voice Settings, click on the Calls tab. Make sure your settings match these:

  • Call Screening - OFF
  • Call Presentation - OFF
  • Caller ID (In) - Display Caller's Number
  • Caller ID (Out) - Don't Change Anything
  • Do Not Disturb - OFF
  • Call Options (Enable Recording) - OFF
  • Global Spam Filtering - ON

Click Save Changes once you adjust your settings. Under the Voicemail tab, plug in your email address so you get notified of new voicemails. Down the road, receipt of a Google Voice voicemail will be a big hint that something has come unglued on your PBX.

Configuring Google Voice Trunk in FreePBX. All trunk configurations now are managed within FreePBX, including Google Voice. This makes it easy to customize PBX in a Flash to meet your specific needs. Click the Setup tab and choose Google Voice in the Third Party Addons. To Add a new Google Voice account, just fill out the form:

Phone number is your 10-digit Google Voice number. Username is your Google Voice account name without @gmail.com. NOTE: You must use a Gmail.com address in the current version of this module! Password is your Google Voice password. NOTE: Don't use 2-stage password protection in this Google Voice account! Be sure to check all three boxes: Add trunk, Add routes, and Agree to TOS. Then click Submit Changes and reload FreePBX. Down the road, you can add additional Google Voice numbers by clicking Add GoogleVoice Account option in the right margin and repeating the drill. For Google Apps support, see this post on the PIAF Forum.

Outbound Routes. The idea behind multiple outbound routes is to save money. Some providers are cheaper to some places than others. It also provides redundancy which costs you nothing if you don't use the backup providers. The Google Voice module actually configures an Outbound Route for 10-digit Google Voice calling as part of the automatic setup. If this meets your requirements, then you can skip this step for today.

Inbound Routes. An Inbound Route tells PBX in a Flash how to route incoming calls. The idea here is that you can have multiple DIDs (phone numbers) that get routed to different extensions or ring groups or departments. For today, we'll build a simple route that directs your Google Voice calls to extension 201. Choose Inbound Routes, leave all of the settings at their default values except enter your 10-digit Google Voice number in the DID Number field. Enable CallerID lookups by choosing CallerID Superfecta in the CID Lookup Source pulldown. Then move to the Set Destination section and choose Extensions in the left pull-down and 201 in the extension pull-down. Now click Submit and save your changes. That will assure that incoming Google Voice calls are routed to extension 201.

IMPORTANT: Before Google Voice calling will actually work, you must restart Asterisk from the Linux command line interface. Log into your server as root and issue this command: amportal restart.

General Settings. Last, but not least, we need to enter an email address for you so that you are notified when new FreePBX updates are released. Scroll to the bottom of the General Settings screen after selecting it from the left panel. Plug in your email address, click Submit, and save your changes. Done!

Configuring a SIP Phone. There are hundreds of terrific SIP telephones and softphones for Asterisk-based systems. Once you get things humming along, you'll want a real SIP telephone such as the $50 Nortel color videophone we've recommended previously. You'll also find lots of additional recommendations on Nerd Vittles and in the PBX in a Flash Forum. If you're like us, we want to make damn sure this stuff works before you shell out any money. So, for today, let's download a terrific (free) softphone to get you started. We recommend X-Lite because there are versions for Windows, Mac, and Linux. So download your favorite from this link. Install and run X-Lite on your Desktop. At the top of the phone, click on the Down Arrow and choose SIP Account Settings, Add. Enter the following information using 201 for your extension and your actual password for extension 201. Then plug in the actual IP address of your PBX in a Flash server instead of 192.168.0.251. Click OK when finished. Your softphone should now show: Available.

Enabling Google Voicemail. Some have requested a way to retain Google's voicemail system for unanswered calls in lieu of using Asterisk voicemail. The advantage is that Google offers a free transcription service for voicemail messages. To activate this, you'll need to edit the [googlein] context in extensions_custom.conf in /etc/asterisk. Just modify the last four lines in the context so that they look like this and then restart Asterisk: amportal restart

;exten => s,n(regcall),Answer
;exten => s,n,SendDTMF(1)
exten => s,n(regcall),Set(DIAL_OPTIONS=${DIAL_OPTIONS}aD(:1))
exten => s,n,Goto(from-trunk,gv-incoming,1)

But I Don't Want to Use Google Voice. If you'd prefer not to use Google Voice at all with PBX in a Flash, that's okay, too. Here's how to disable it and avoid the chatter in the Asterisk CLI. Log into your server as root and edit /etc/asterisk/modules.conf. Change the first three lines in the [modules] context so that they look like this. Then restart Asterisk: amportal restart.

autoload=yes
noload => res_jabber.so
noload => chan_gtalk.so

There's now a patch that automatically adjusts Asterisk to accommodate Google Voice whenever you have added Google Voice extensions to your system. To download and install the patch, visit the PIAF Forum.

Incredible PBX 2.9. If you want all of the awesome Asterisk apps in one easy-to-install package, then Incredible PBX 2.9 is for you. Here's a link to the Nerd Vittles article explaining the 5-minute drill. Enjoy!

Originally published: Monday, December 26, 2011


Need help with Asterisk? Visit the PBX in a Flash Forum.
Or Try the New, Free PBX in a Flash Conference Bridge.

whos.amung.us If you're wondering what your fellow man is reading on Nerd Vittles these days, wonder no more. Visit our new whos.amung.us statistical web site and check out what's happening. It's a terrific resource both for us and for you.

 

Special Thanks to Our Generous Sponsors


FULL DISCLOSURE: ClearlyIP, Skyetel, Vitelity, DigitalOcean, Vultr, VoIP.ms, 3CX, Sangoma, TelecomsXchange and VitalPBX have provided financial support to Nerd Vittles and our open source projects through advertising, referral revenue, and/or merchandise. As an Amazon Associate and Best Buy Affiliate, we also earn from qualifying purchases. We’ve chosen these providers not the other way around. Our decisions are based upon their corporate reputation and the quality of their offerings and pricing. Our recommendations regarding technology are reached without regard to financial compensation except in situations in which comparable products at comparable pricing are available from multiple sources. In this limited case, we support our sponsors because our sponsors support us.

BOGO Bonaza: Enjoy state-of-the-art VoIP service with a $10 credit and half-price SIP service on up to $500 of Skyetel trunking with free number porting when you fund your Skyetel account. No limits on number of simultaneous calls. Quadruple data center redundancy. $25 monthly minimum spend required. Tutorial and sign up details are here.

The lynchpin of Incredible PBX 2020 and beyond is ClearlyIP components which bring management of FreePBX modules and SIP phone integration to a level never before available with any other Asterisk distribution. And now you can configure and reconfigure your new Incredible PBX phones from the convenience of the Incredible PBX GUI.

VitalPBX is perhaps the fastest-growing PBX offering based upon Asterisk with an installed presence in more than 100 countries worldwide. VitalPBX has generously provided a customized White Label version of Incredible PBX tailored for use with all Incredible PBX and VitalPBX custom applications. Follow this link for a free test drive!
 

Special Thanks to Vitelity. Vitelity is now Voyant Communications and has halted new registrations for the time being. Our special thanks to Vitelity for their unwavering financial support over many years and to the many Nerd Vittles readers who continue to enjoy the benefits of their service offerings. We will keep everyone posted on further developments.
 

Some Recent Nerd Vittles Articles of Interest...

Introducing PIAF2 and Incredible PBX 2.9 with CentOS 6.1

Thursday, December 15, 2011


We're pleased to introduce the latest and greatest PBX in a Flash™ 2.0.6.1 featuring CentOS® 6.11 and the brand-new Incredible PBX™ 2.9 with an incomparable VoIP feature set. PIAF2™ provides turnkey installs of Asterisk® 1.8 or 2.0 with your choice of FreePBX® 2.8, 2.9, or 2.10. And, for those choosing to install Incredible PBX 2.9, it's been engineered to work flawlessly with the 32-bit version of PIAF2 using Asterisk 1.8 and FreePBX 2.9. For the ultimate in performance, a 64-bit version of PIAF2 is also available; however, because of its size, a DVD is required to burn the ISO. And, as noted, it is not compatible with Incredible PBX 2.9.

12/17 Update: Shortly after PIAF2 hit the street, Digium released Asterisk 1.8.8.0 and the first non-beta version of Asterisk 10. New 32-bit and 64-bit PIAF 2.0.6.1.2 ISOs will be available on SourceForge today that incorporate these new builds. In addition, a CentOS 6 video quirk has been identified on some Atom hardware. So the new ISOs include an install option to disable the problematic video testing by kicking off the install with one of the following commands instead of merely pressing the Enter key: ks-nomode, ksraid-nomode, or kslvm-nomode. You'll know if you have the problem if your server locks up. 😉 Finally, because there now are multiple stable versions of Asterisk, we have added the option to selectively choose a version of Asterisk to install. Instead of picking PIAF-Purple or PIAF-Red, you can drop down to the Linux command prompt, log in as root, and issue a command using the following syntax: piafdl -p beta_1872_purple.

Photo courtesy of mashable.com

Free Google Voice calling in the U.S. and Canada has been extended for calendar year 2012 and now can be configured using the simple FreePBX 2.9 GUI. And you can use it with or without Incredible PBX. Set up one or many Google Voice connections in less than 10 seconds per line. With Incredible PBX, we've also included Andrew Nagy's terrific EndPoint Manager that lets you configure dozens of SIP phones with the click of a button. You'll also find Kennonsoft's terrific new PBX in a Flash UI with HTML5 and CSS3 support for the latest Firefox, Chrome, and IE browsers. And, of course, you still get almost every Asterisk application on the planet preconfigured and ready to use.

With PIAF2, the installation process has been streamlined considerably. At the outset, you will be prompted for some basic information and a root password. Once the CentOS 6.1 install completes and you remove the CD/DVD during the server reboot, you will be prompted for whether you wish to tailor Asterisk using menuconfig, your time zone, the version of FreePBX you wish to install, and your master password for FreePBX access. Once you've answered these few questions, you can kick off the PIAF2 install and walk away. Depending upon the performance of your server, come back in 15-30 minutes. While it's not the quickest install on the planet, it will always be the most current because PIAF2 always loads the latest patches to CentOS as well as Asterisk and FreePBX. In other words, it's worth the wait to know you're installing a secure and up-to-date system. And, as your high school girlfriend probably taught you, faster is not always better.

The Incredible PBX 2.9 Inventory. For those that have never heard of The Incredible PBX, here's the current 2.9 feature set in addition to the base install of PBX in a Flash with the CentOS 6.1, Asterisk 1.8, FreePBX 2.9, and Apache, SendMail, MySQL, PHP, phpMyAdmin, IPtables Linux firewall, Fail2Ban, and WebMin. Cepstral TTS, Faxing, Hamachi VPN, and Mondo Backups are still just one command away and may be installed using the scripts included with base Incredible PBX 2.9 installation.

Update: Incredible Fax is not yet compatible with PIAF2, but we're working on it.

What began as a kludgey, dual-call, dual-provider Google Voice implementation to take advantage of Google's free PSTN calling in the U.S. and Canada with Asterisk 1.4 and 1.6 is now a zippy-quick, Gtalk-based calling platform that rivals the best SIP-to-SIP calls on the planet and provides virtually instantaneous PSTN connections to almost anybody, anywhere. Trust us! Except for the price which is still free, you'll never know you weren't connected via Ma Bell's overpriced long-distance lines and neither will the Little Mrs. And, yes, our recommended $50 Nortel SIP videophone is plug-and-play.

Just download the latest 32-bit PBX in a Flash 2.0.6.1 ISO from SourceForge, burn to then boot from the PIAF2 CD, choose the PIAF-Purple option to load Asterisk 1.8, and pick FreePBX 2.9 when prompted. Once the PIAF2 install is completed, just run the new Incredible PBX 2.9 installer. In less than an hour, you'll have a turnkey PBX with a local phone number and free calling in the U.S. and Canada via your own Google Voice account plus dozens and dozens of terrific Asterisk applications to keep you busy exploring for months.

Thanks to its Zero Internet Footprint™ design, Incredible PBX 2.9 remains the most secure Asterisk-based PBX around. What this means is The Incredible PBX™ has been engineered to sit safely behind a NAT-based, hardware firewall with no port exposure to your actual server. And you won't find a more full-featured Personal Branch Exchange™ at any price.

Did we mention that all of this telephone goodness is still absolutely FREE!

Prerequisites. Here's what we recommend to get started properly:

Installing Incredible PBX 2.9. The installation process is simple and straight-forward. We're down to 3 Easy Steps to Free Calling, and The Incredible PBX will be ready to receive and make free U.S./Canada calls immediately:

1. Install PIAF-Purple & FreePBX 2.9 using 32-bit PIAF2 ISO
2. Download & run Incredible PBX 2.9 installer
3. Configure Google Voice and a softphone or SIP telephone

Installing PBX in a Flash. Here's a quick tutorial to get PBX in a Flash 2.0 installed. To use Incredible PBX 2.9, just install the latest 32-bit version of PBX in a Flash 2.0. Unlike other Asterisk aggregations, PBX in a Flash utilizes a two-step install process. The ISO only installs the CentOS 6.1 operating system. Once CentOS is installed, the server reboots and downloads a payload file that includes Asterisk, FreePBX, and many other VoIP and Linux utilities including all of the new Google Voice components. Just choose the PIAF-Purple payload to get the latest Asterisk 1.8. You'll then be prompted to choose your flavor of FreePBX. Choose FreePBX 2.9. Then set your time zone and set up a password for FreePBX access, and you're all set. As part of the install, yum now will automatically update your operating system to CentOS 6.2 minus the 6.2 kernel.

You can download the 32-bit PIAF2 from SourceForge. Burn the ISO to a CD. Then boot from the installation CD and press the Enter key to begin.

WARNING: This install will completely erase, repartition, and reformat EVERY DISK (including USB flash drives) connected to your system so disable any disk you wish to preserve AND remove any USB flash drives! Press Ctrl-C to cancel.

At the keyboard prompt, tab to OK and press Enter. At the time zone prompt, tab once, highlight your time zone, tab to OK and press Enter. At the password prompt, make up a VERY secure root password. Type it twice. Tab to OK, press Enter. Get a cup of coffee. Come back in about 5 minutes. When the system has installed CentOS 6.1, it will reboot. Remove the CD promptly. After the reboot, choose PIAF-Purple. In less than a minute, you'll be prompted for the FreePBX version you wish to install. Choose 2.9 and fill in your choices for the remaining prompts. Then have a 15-minute cup of coffee. After installation is complete, the machine will reboot a second time. You now have a PBX in a Flash base install. On a stand-alone machine, it takes 30-60 minutes. On a virtual machine, it takes about half that time. Log into your server with your root password and write down the server's IP address. You'll need it to access FreePBX with your browser.

NOTE: For previous users of PBX in a Flash, be aware that this new version automatically runs update-programs, update-fixes, and passwd-master for you. So your system is relatively secure out of the box! See the Proxmox cautionary alert in the footnotes to this article!

Configuring Google Voice. You'll need a dedicated Google Voice account to support Incredible PBX 2.9. If you plan to use the inbound fax capabilities of Incredible PBX 2.9, then you'll want an additional Google Voice line that can be routed to the FAX miscellaneous destination using FreePBX. The more obscure the username (with some embedded numbers), the better off you will be. This will keep folks from bombarding you with unsolicited Gtalk chat messages, and who knows what nefarious scheme will be discovered using Google messaging six months from now. So keep this account a secret!

We've tested this extensively using an existing Gmail account, and inbound calling is just not reliable. The reason seems to be that Google always chooses Gmail chat as the inbound call destination if there are multiple registrations from the same IP address. So, be reasonable. Do it our way! Set up a dedicated Gmail and Google Voice account, and use it exclusively with The Incredible PBX. Google Voice no longer is by invitation only so, if you're in the U.S. or have a friend that is, head over to the Google Voice site and register. If you're living on another continent, see MisterQ's posting for some tips on getting set up.

You must choose a telephone number (aka DID) for your new account, or Google Voice calling will not work... in either direction. Google used to permit outbound Gtalk calls using a fake CallerID, but that obviously led to abuse so it's over! You also have to tie your Google Voice account to at least one working phone number as part of the initial setup process. Your cellphone number will work just fine. Don't skip this step either. Just enter the provided 2-digit confirmation code when you tell Google to place the test call to the phone number you entered. Once the number is registered, you can disable it if you'd like in Settings, Voice Setting, Phones. But...

IMPORTANT: Be sure to enable the Google Chat option as one of your phone destinations in Settings, Voice Setting, Phones. That's the destination we need for The Incredible PBX to work its magic! Otherwise, all inbound and outbound calls will fail. If you don't see this option, you may need to call up Gmail and enable Google Chat there first. Then go back to the Google Voice Settings.

While you're still in Google Voice Settings, click on the Calls tab. Make sure your settings match these:

  • Call Screening - OFF
  • Call Presentation - OFF
  • Caller ID (In) - Display Caller's Number
  • Caller ID (Out) - Don't Change Anything
  • Do Not Disturb - OFF
  • Call Options (Enable Recording) - OFF
  • Global Spam Filtering - ON

Click Save Changes once you adjust your settings. Under the Voicemail tab, plug in your email address so you get notified of new voicemails. Down the road, receipt of a Google Voice voicemail will be a big hint that something has come unglued on your PBX.

Incredible PBX 2.9 Installation. Log into your server as root and issue the following commands to download and run The Incredible PBX installer:

cd /root
wget http://incrediblepbx.com/incrediblepbx29.x
chmod +x incrediblepbx29.x
./incrediblepbx29.x

When The Incredible PBX install begins, you'll be prompted for your FreePBX maint password. This is required to properly configure CallerID Superfecta for you. Your credentials never leave your server!

Now have another 15-minute cup of coffee, and consider a modest donation to Nerd Vittles... for all of our hard work. 😉 You'll find a link at the top of the page. While you're waiting just make sure that you've heeded our advice and installed your server behind a hardware-based firewall. No ports need to be opened on your firewall to support Incredible PBX. Leave it that way!

One final word of caution is in order regardless of your choice of providers: Do NOT use special characters in any provider passwords, or nothing will work!

Logging in to FreePBX 2.9. Using a web browser, you access the FreePBX GUI by pointing your browser to the IP address of your Incredible PBX. Click on the Users tab. It will change to Admin. Now click the FreePBX button. When prompted for a username, it's maint. When prompted for the password, it's whatever you set up as your maint password when you installed Incredible PBX 2.9. If you forget it, you can always reset it by logging into your server as root and running passwd-master.

Configuring Google Voice Trunks in FreePBX. All trunk configurations now are managed within FreePBX, including Google Voice. This makes it easy to customize your Incredible PBX to meet your specific needs. If you plan to use Google Voice, here's how to quickly configure one or more Google Voice trunks within FreePBX. After logging into FreePBX with your browser, click the Setup tab and choose Google Voice in the Third Party Addons. To Add a new Google Voice account, just fill out the form:

Phone number is your 10-digit Google Voice number. Username is your Google Voice account name without @gmail.com. NOTE: You must use a Gmail.com address in the current version of this module! Password is your Google Voice password. NOTE: Don't use 2-stage password protection in this Google Voice account! Be sure to check all three boxes: Add trunk, Add routes, and Agree to TOS. Then click Submit Changes and reload FreePBX. You can add additional Google Voice numbers by clicking Add GoogleVoice Account option in the right margin and repeating the drill.

While you're still in FreePBX, choose Setup, Extensions, and click on the 701 extension. Write down your extension password which you'll need to configure a phone in a minute.

IMPORTANT LAST STEP: Google Voice will not work unless you restart Asterisk from the Linux command line at this juncture. Using SSH, log into your server as root and issue the following command: amportal restart.

Incredible Fax Installation. If you want the added convenience of having your Incredible PBX double as a free fax machine, run /root/incrediblefax.sh shell script when the Incredible PBX install completes. Plug in your email address for delivery of incoming faxes and enter your home area code when prompted. For every other prompt, just press the Enter key. For complete documentation, see this Nerd Vittles article. Don't forget to REBOOT YOUR SERVER when the install is finished, or faxing won't work!

Also be sure to set up a second, dedicated Google Voice number if you want support for inbound faxing. Once the Google Voice credentials are configured in FreePBX for the additional Google Voice line, simply add an Inbound Route for this DID to point to the FAX misc. destination that comes preconfigured with Incredible PBX 2.9. Just substitute your 10-digit Google Voice number for the DID number shown below. Save your entries and reload FreePBX.

Extension Password Discovery. If you're too lazy to look up your extension 701 password using the FreePBX GUI, you can log into your server as root and issue the following command to obtain the password for extension 701 which we'll need to configure your softphone or color videophone in the next step:

mysql -uroot -ppassw0rd -e"select id,data from asterisk.sip where id='701' and keyword='secret'"

The result will look something like the following where 701 is the extension and 18016 is the randomly-generated extension password exclusively for your Incredible PBX:

+-----+-------+
id         data
+-----+-------+
701      18016
+-----+-------+

Configuring a SIP Phone. There are hundreds of terrific SIP telephones and softphones for Asterisk-based systems. Once you get things humming along, you'll want a real SIP telephone such as the $50 Nortel color videophone we've recommended above. You'll also find lots of additional recommendations on Nerd Vittles and in the PBX in a Flash Forum. If you're like us, we want to make damn sure this stuff works before you shell out any money. So, for today, let's download a terrific (free) softphone to get you started. We recommend X-Lite because there are versions for Windows, Mac, and Linux. So download your favorite from this link. Install and run X-Lite on your Desktop. At the top of the phone, click on the Down Arrow and choose SIP Account Settings, Add. Enter the following information using your actual password for extension 701 and the actual IP address of your Incredible PBX server instead of 192.168.0.251. Click OK when finished. Your softphone should now show: Available.

Incredible PBX Test Flight. The proof is in the pudding as they say. So let's try two simple tests. First, let's place an outbound call. Using the softphone, dial your 10-digit cellphone number. Google Voice should transparently connect you. Answer the call and make sure you can send and receive voice on both phones. Second, from another phone, call the Google Voice number that you've dedicated to The Incredible PBX. Your softphone should begin ringing shortly. Answer the call, press 1 to accept the call, and then make sure you can send and receive voice on both phones. Hang up. If everything is working, congratulations!

Here's a brief video demonstration showing how to set up a softphone to use with your Incredible PBX, and it also walks you through several of the dozens of Asterisk applications included in your system.

Solving One-Way Audio Problems. If you experience one-way audio on some of your phone calls, you may need to adjust the settings in /etc/asterisk/sip_custom.conf. Just uncomment the first two lines by removing the semicolons. Then replace 173.15.238.123 with your public IP address, and replace 192.168.0.0 with the subnet address of your private network. There are similar settings in gtalk.conf that can be activated although we've never had to use them. In fact, we've never had to use any of these settings. After making these changes, save the file(s) and restart Asterisk with the command: amportal restart.

Learn First. Explore Second. Even though the installation process has been completed, we strongly recommend you do some reading before you begin your VoIP adventure. VoIP PBX systems have become a favorite target of the hackers and crackers around the world and, unless you have an unlimited bank account, you need to take some time learning where the minefields are in today's VoIP world. Start by reading our Primer on Asterisk Security. We've secured all of your passwords except your root password and your passwd-master password. We're assuming you've put very secure passwords on those accounts as if your phone bill depended upon it. It does! Also read our PBX in a Flash and VPN in a Flash knols. If you're still not asleep, there's loads of additional documentation on the PBX in a Flash documentation web site.

Choosing a VoIP Provider for Redundancy. Nothing beats free when it comes to long distance calls. But nothing lasts forever. And, in the VoIP World, redundancy is dirt cheap. So we strongly recommend you set up another account with Vitelity using our special link below. This gives your PBX a secondary way to communicate with every telephone in the world, and it also gets you a second real phone number for your new system... so that people can call you. Here's how it works. You pay Vitelity a deposit for phone service. They then will bill you $3.99 a month for your new phone number. This $3.99 also covers the cost of unlimited inbound calls (two at a time) delivered to your PBX for the month. For outbound calls, you pay by the minute and the cost is determined by where you're calling. If you're in the U.S., outbound calls to anywhere in the U.S. are a little over a penny a minute. If you change your mind about Vitelity and want a refund of the balance in your account, all you have to do is ask. The trunks for Vitelity already are preconfigured with The Incredible PBX. Just insert your credentials using FreePBX and uncheck the Disable Trunk checkbox. Then add the Vitelity trunk as the third destination for your default outbound route. That's it. Congratulations! You now have a totally redundant phone system.

We've also included Trunk configurations for a dozen of our favorite hosting providers to get you started. You can sign up for service with any of them, insert your credentials in the existing trunk, uncheck the Disable Trunk checkbox, and then adjust your outbound route and add an inbound route for your new DID (if you get one).

Stealth AutoAttendant. When incoming calls arrive, the caller is greeted with a welcoming message from Allison which says something like "Thanks for calling. Please hold a moment while I locate someone to take your call." To the caller, it's merely a greeting. To those "in the know," it's actually an AutoAttendant (aka IVR system) that gives you the opportunity to press a button during the message to trigger the running of some application on your Incredible PBX. As configured, the only option that works is 0 which fires up the Nerd Vittles Apps IVR. It's quite easy to add additional features such as voicemail retrieval or DISA for outbound calling. Just edit the MainIVR option in FreePBX under Setup, IVR. Keep in mind that anyone (anywhere in the world) can choose these options. So be extremely careful not to expose your system to security vulnerabilities by making certain that any options you add have very secure passwords! It's your phone bill. 😉

Configuring Email. You're going to want to be notified when updates are available for FreePBX, and you may also want notifications when new voicemails arrive. Everything already is set up for you except actually entering your email notification address. Using a web browser, open the FreePBX GUI by pointing your browser to the IP address of your Incredible PBX. Then click Administration and choose FreePBX. To set your email address for FreePBX updates, go to Setup, General Settings and scroll to the bottom of the screen. To configure emails to notify you of incoming voicemails, go to Setup, Extensions, 701 and scroll to the bottom of the screen. Then follow your nose. Be sure to reload FreePBX when prompted after saving your changes.

A Word About Security. Security matters to us, and it should matter to you. Not only is the safety of your system at stake but also your wallet and the safety of other folks' systems. Our only means of contacting you with security updates is through the RSS Feed that we maintain for the PBX in a Flash project. This feed is prominently displayed in the web GUI which you can access with any browser pointed to the IP address of your server. Check It Daily! Or add our RSS Feed to your favorite RSS Reader. We also recommend you follow @NerdUno on Twitter. We'll keep you entertained and provide immediate notification of security problems that we hear about. Be safe!

Enabling Google Voicemail. Some have requested a way to retain Google's voicemail system for unanswered calls in lieu of using Asterisk voicemail. The advantage is that Google offers a free transcription service for voicemail messages. To activate this, you'll need to edit the [googlein] context in extensions_custom.conf in /etc/asterisk. Just modify the last four lines in the context so that they look like this and then restart Asterisk: amportal restart

;exten => s,n(regcall),Answer
;exten => s,n,SendDTMF(1)
exten => s,n(regcall),Set(DIAL_OPTIONS=${DIAL_OPTIONS}aD(:1))
exten => s,n,Goto(from-trunk,gv-incoming,1)

Kicking the Tires. OK. That's enough tutorial for today. Let's play. Using your new softphone, begin your adventure by dialing these extensions:

  • D-E-M-O - Incredible PBX Demo (running on your PBX)
  • 1234*1061 - Nerd Vittles Demo via ISN FreeNum connection to NV
  • 17476009082*1089 - Nerd Vittles Demo via ISN to Google/Gizmo5
  • Z-I-P - Enter a five digit zip code for any U.S. weather report
  • 6-1-1 - Enter a 3-character airport code for any U.S. weather report
  • 5-1-1 - Get the latest news and sports headlines from Yahoo News
  • T-I-D-E - Get today's tides and lunar schedule for any U.S. port
  • F-A-X - Send a fax to an email address of your choice
  • 4-1-2 - 3-character phonebook lookup/dialer with AsteriDex
  • M-A-I-L - Record a message and deliver it to any email address
  • C-O-N-F - Set up a MeetMe Conference on the fly
  • 1-2-3 - Schedule regular/recurring reminder (PW: 12345678)
  • 2-2-2 - ODBC/Timeclock Lookup Demo (Empl No: 12345)
  • 2-2-3 - ODBC/AsteriDex Lookup Demo (Code: AME)
  • Dial *68 - Schedule a hotel-style wakeup call from any extension
  • 1061*1061 - PIAF Support Conference Bridge (Conf#: 1061)
  • 882*1061 - VoIP Users Conference every Friday at Noon (EST)

PBX in a Flash SQLite Registry. Last, but not least, we want to introduce you to the new PBX in a Flash Registry which uses SQLite, a zero-configuration SQL-compatible database engine. After logging into your server as root, just type show-registry for a listing of all of the applications, versions, and install dates of everything on your new server. Choosing the A option will generate registry.txt in the /root folder while the other options will let you review the applications by category on the screen. For example, the G option displays all of The Incredible PBX add-ons that have been installed. Here's the complete list of options:

  • A - Write the contents of the registry to registry.txt
  • B - PBX in a Flash install details
  • C - Extra programs install details
  • D - Update-fixes status and details
  • E - RPM install details
  • F - FreePBX modules install details
  • G - Incredible PBX install details
  • Q - Quit this program

And here's a sample from an install we recently completed.

Special Thanks. It's hard to know where to start in expressing our gratitude for all of the participants that made today's incredibly simple-to-use product possible. To Philippe Sultan and the rest of the Asterisk development team, thank you for finally making Jabber jabber with Asterisk. To Leif Madsen, our special thanks for your early pioneering work with Gtalk and Jabber which got this ball rolling. To Philippe Lindheimer, Tony Lewis, and the rest of the FreePBX development team, thanks for FreePBX 2.9 which really makes Asterisk shine. To Lefteris Zafiris, thank you for making Flite work with Asterisk 1.8 thereby preserving all of the Nerd Vittles text-to-speech applications. To Darren Sessions, thanks for whipping app_swift into shape and restoring Cepstral and commercial TTS applications to the land of the living with Asterisk 1.8. And to our pal, Tom King, we couldn't have done it without you. You rolled up your sleeves and really made CentOS 6 and Asterisk 1.8 and 10 sit up and bark. No one will quite understand what an endeavor that is until they try it themselves. You won't find another CentOS 6 implementation of Asterisk, and Tom has made it look incredibly easy. It wasn't! In fact, when CentOS released 6.1 this week, Tom actually shifted gears (again) and rebuilt PIAF2 (in a couple of days) to take advantage of CentOS 6.1. And, last but not least, to our dozens of beta testers, THANK YOU! We've implemented almost all of your suggestions.

Additional Goodies. Be sure to log into your server as root and look through the scripts added in the /root and /root/nv folders. You'll find all sorts of goodies to keep you busy. There's an all-new incrediblefax.sh script that painlessly installs and configures HylaFax and AvantFax for state-of-the-art faxing. The 32-bit install-cepstral script does just what it says. With Allison's Cepstral voice, you'll have the best TTS implementation for Asterisk available. ipscan is a little shell script that will tell you every working IP device on your LAN. trunks.sh tells you all of the Asterisk trunks configured on your system. purgeCIDcache.sh will clean out the CallerID cache in the Asterisk database. convert2gsm.sh shows you how to convert a .wav file to .gsm. munin.pbx will install Munin on your system while awstats.pbx installs AWstats. s3cmd.faq tells you how to quickly activate the Amazon S3 Cloud Computing service. All the other scripts and apps in /root/nv already have been installed for you so don't install them again.

If you've heeded our advice and purchased a PogoPlug, you can link to your home-grown cloud as well. Just add your credentials to /root/pogo-start.sh. Then run the script to enable the PogoPlug Cloud on your server. All of your cloud resources are instantly accessible in /mnt/pogoplug. It's perfect for off-site backups and is included as one of the backup options in the PBX in a Flash backup utilities.

Don't forget to List Yourself in Directory Assistance so everyone can find you by dialing 411. And add your new number to the Do Not Call Registry to block telemarketing calls. Or just call 888-382-1222 from your new number. Enjoy!

Originally published: Thursday, December 15, 2011

VoIP Virtualization with Incredible PBX: OpenVZ and Cloud Solutions

Safely Interconnecting Asterisk Servers for Free Calling

Adding Skype to The Incredible PBX

Adding Incredible Fax to The Incredible PBX

Adding Incredible Backup... and Restore to The Incredible PBX

Adding Remotes, Preserving Security with The Incredible PBX

Remote Phone Meets Travelin' Man with The Incredible PBX

Continue reading Part II.

Continue reading Part III.

Continue reading Part IV.

Support Issues. With any application as sophisticated as this one, you're bound to have questions. Blog comments are a terrible place to handle support issues although we welcome general comments about our articles and software. If you have particular support issues, we encourage you to get actively involved in the PBX in a Flash Forums. It's the best Asterisk tech support site in the business, and it's all free! We maintain a thread with Information, Patches and Bug Fixes for Incredible PBX 2.9. Please have a look. Unlike some forums, ours is extremely friendly and is supported by literally hundreds of Asterisk gurus and thousands of ordinary users just like you. You won't have to wait long for an answer to your question.


Need help with Asterisk? Visit the PBX in a Flash Forum.
Or Try the New, Free PBX in a Flash Conference Bridge.

whos.amung.us If you're wondering what your fellow man is reading on Nerd Vittles these days, wonder no more. Visit our new whos.amung.us statistical web site and check out what's happening. It's a terrific resource both for us and for you.

 

Special Thanks to Our Generous Sponsors


FULL DISCLOSURE: ClearlyIP, Skyetel, Vitelity, DigitalOcean, Vultr, VoIP.ms, 3CX, Sangoma, TelecomsXchange and VitalPBX have provided financial support to Nerd Vittles and our open source projects through advertising, referral revenue, and/or merchandise. As an Amazon Associate and Best Buy Affiliate, we also earn from qualifying purchases. We’ve chosen these providers not the other way around. Our decisions are based upon their corporate reputation and the quality of their offerings and pricing. Our recommendations regarding technology are reached without regard to financial compensation except in situations in which comparable products at comparable pricing are available from multiple sources. In this limited case, we support our sponsors because our sponsors support us.

BOGO Bonaza: Enjoy state-of-the-art VoIP service with a $10 credit and half-price SIP service on up to $500 of Skyetel trunking with free number porting when you fund your Skyetel account. No limits on number of simultaneous calls. Quadruple data center redundancy. $25 monthly minimum spend required. Tutorial and sign up details are here.

The lynchpin of Incredible PBX 2020 and beyond is ClearlyIP components which bring management of FreePBX modules and SIP phone integration to a level never before available with any other Asterisk distribution. And now you can configure and reconfigure your new Incredible PBX phones from the convenience of the Incredible PBX GUI.

VitalPBX is perhaps the fastest-growing PBX offering based upon Asterisk with an installed presence in more than 100 countries worldwide. VitalPBX has generously provided a customized White Label version of Incredible PBX tailored for use with all Incredible PBX and VitalPBX custom applications. Follow this link for a free test drive!
 

Special Thanks to Vitelity. Vitelity is now Voyant Communications and has halted new registrations for the time being. Our special thanks to Vitelity for their unwavering financial support over many years and to the many Nerd Vittles readers who continue to enjoy the benefits of their service offerings. We will keep everyone posted on further developments.
 

Some Recent Nerd Vittles Articles of Interest...

  1. As part of the yum update process, you'll actually end up with CentOS 6.2 minus the 6.2 kernel. [↩]
  2. If you use the recommended Acer Aspire Revo, be advised that it does NOT include a CD/DVD drive. You will need an external USB CD/DVD drive to load the software. Some of these work with CentOS, and some don't. Most HP and Sony drives work; however, we strongly recommend you purchase an external DVD drive from a merchant that will accept returns, e.g. Best Buy, WalMart, Office Depot, Office Max, Staples. You also can run Incredible PBX 2.9 on a virtual machine such as the free Proxmox server. A security vulnerability has been reported in the Proxmox browser so be sure to run your server behind a secure, hardware-based firewall with no port exposure to the actual Proxmox server from the Internet. [↩]

The Ultimate VoIP Sandbox: PBX in a Flash 2 with CentOS 6

Monday, November 21, 2011 / 2 Comments on The Ultimate VoIP Sandbox: PBX in a Flash 2 with CentOS 6

Today we're delighted to introduce the new PBX in a Flash 2™ beta built atop the latest release of CentOS® 6. Featuring superior scalability, improved performance, better resource management, and unmatched device support, PBX in a Flash 2.0.6.0 brings you the most versatile Asterisk® platform on the planet with the latest and greatest releases of virtually every major open source product in the marketplace. In addition to providing your choice of Asterisk 1.8 versions or Asterisk 10, PIAF2™ also gives you a choice of FreePBX® 2.8, 2.9, or 2.10. For those wanting to experiment, PIAF2 also provides direct access to Asterisk's menuconfig system to customize the selection of Asterisk modules you wish to deploy. And, of course, PIAF2 continues to provide the only turnkey Google Voice solution providing immediate free calling throughout the U.S. and Canada. We'll walk you through the 2-minute drill to deploy Google Voice for inbound and outbound calling with FreePBX. Incredible PBX is not yet compatible!

NEWS FLASH: Looks like free Google Voice calling in the U.S. and Canada will be continued for 2012. See our Google+ post for details.


[iframe-popup id="6"]
Our special tip of the hat again goes to Tom King, who has spent the better part of four months integrating PIAF2 into the new CentOS 6 release. To suggest that this was not a job for mere mortals doesn't begin to paint the picture of this long and winding road. The good news is we think you'll be delighted with the results. The PBX in a Flash install process now has been streamlined into three distinct components. After downloading the ISO and burning a DVD to install your new server, here's how it works. First, you get to choose the file system for your new CentOS server. The PIAF2 installer will whir away for about 15 minutes installing CentOS6. When your system reboots, remove the DVD and Phase 2 begins. Here you get to choose your flavor of Asterisk to deploy. We continue to recommend PIAF2-Purple as the stable product for all but pioneers. Within a minute or so, your chosen Asterisk installer will load. In Phase 3 (the Config Module), you pick your flavor of FreePBX and choose a password for access, set your time zone, and decide whether you want to further customize Asterisk using menuconfig. Once you've made your selections, everything else installs on autopilot unless you opted to use menuconfig. If so, come back in 15 minutes and tailor away. Then press x to save your settings and finish the install. Depending on the speed of your server or virtual machine, the complete install usually takes 30-60 minutes.

After the final reboot, you'll have a working PIAF2 server. Open up FreePBX with a browser, enter your Google Voice credentials, create an extension, link an inbound route to that extension to accept calls, restart Asterisk from the command prompt, and you'll have a fully operational PBX in less than 2 minutes.

PIAF2 in the Cloud. We've been experimenting with several new (free) Cloud storage offerings. Because of the enormous size of the new ISO (1.79 GB), we've decided to host the PIAF2 beta ISO with two of these cloud providers in addition to some of our regular mirrors. This will let you judge the spectacular download performance of these new cloud offerings for yourself. Incidentally, you can sign up for your own free cloud storage at both sites. Our favorite is minus.com which offers 10GB of free cloud storage for life plus an extra gigabyte for you and for the PIAF Dev Team when you use our special signup link. You've got nothing to lose, and it helps the PBX in a Flash project as well. The other free offering is from one of our old favorites, PogoPlug. Just visit their site and grab your 5GB of free storage. Just a footnote that C|NET was offering 10GB of free PogoPlug storage last week, but you missed the window unless you're a PIAF Forum regular. HINT!

Creating a PIAF2 DVD. To get started, download the 1.79GB PIAF2 ISO. The MD5 checksum for the 32-bit ISO is 13d9302ef408feae726c2ca2b2c42a7c. The 64-bit MD5 is 3e7264e27099e35b631e7c7acca65c95. Here are the current download links.

Special Note: Upcoming Incredible PBX 2.9 only works with 32-bit ISO using PIAF-Purple (Asterisk 1.8) and FreePBX 2.9.

Minus Cloud (32-bit): Folder or ISO or Wget Link
Minus Cloud (64-bit): Folder or ISO or Wget Link
PogoPlug Cloud: Folder or 32-bit ISO
Google Cloud: Folder or 32-bit ISO
Vitelity: 32-bit ISO Download Link
SourceForge: Folder or 32-bit ISO or 64-bit ISO

Once you have the ISO image in hand, the next step is to burn the ISO image to a DVD. If you've never done it before, here's a tutorial that will show you how on either a Windows machine or a Mac.

Using PIAF2 with Proxmox. For those using Proxmox to host PIAF2 virtual machines, the easiest approach is to log into your server as root, change to the /var/lib/vz/template/iso directory, and issue a wget command using the Wget Link above. Once the download completes, don't forget to rename the ISO to pbxinaflash20601-i386.iso. The naming convention really matters with Proxmox! In building KVM virtual machines with Proxmox, you'll need to allocate at least 768MB of RAM (1024MB recommended) for each image. CentOS 6 has a much larger memory footprint than CentOS 5. Reminder: Be sure Proxmox is sitting behind a secure hardware-based firewall. It is NOT secure on the open Internet!

Atom-based PC Platform. Unless you're using PIAF2 on a virtual hosting platform, you'll need a dedicated PC. For the least expensive hardware alternative, pick up an Atom-based PC. We previously have recommended against an EEE PC because of the network driver incompatibility with CentOS 5. We'll have to leave it to the pioneers to tell us whether this still applies with CentOS 6. We do know that the refurbished Acer desktops work fine. Someone has actually tested them! And they can easily support a small business with dozens of phones.

FreePBX Setup. After the PIAF2 install finishes, your server will reboot once again. Log into the Linux CLI as root using your root password. Write down the IP address of your server from the status display and verify that everything installed properly. Note that Samba is disabled by default. If you want to use it for Windows Networking, run configure-samba once your server is up and running.

Most of your life with PBX in a Flash will be spent using the FreePBX web GUI and your favorite browser. The PIAF Web GUI (shown above) is undergoing some upgrades to assure compatibility with the new PHP release. If you point a browser to the IP address of your server and see no icons or RSS Feed (as shown above), then apply the update patch below.

Update: Here's the two-line patch to address the PHP 5.3 change in behavior. The PHP opening tag syntax of <? is no longer allowed by default. To force PHP 5.3 to conform to the prior (permissible) syntax, log into your server as root and issue the following two commands:

sed -i 's|short_open_tag = Off|short_open_tag = On|' /etc/php.ini
service httpd restart

This restores the PIAF GUI to its former operation. Be sure to check the RSS Feed daily by pointing your browser to the IP address of your server. The RSS Feed is displayed in the left column of the GUI and will alert you to any newly discovered security vulnerabilities.

You also can access the FreePBX GUI directly by pointing your browser to the IP address of your PIAF2 server: http://ipaddress/admin. When prompted for your username and password, the username is maint. The password will be the FreePBX master password you chose in Phase 3 of the PIAF install. Because of the PHP 5.3 issues mentioned above, we recommend FreePBX 2.9 which already is compatible with this new release.

To get a minimal system functioning to make and receive calls, here's the 2-minute drill. You'll need to set up at least one extension with voicemail and configure a free Google Voice account for free calls in the U.S. and Canada. Next, configure inbound and outbound routes to manage incoming and outgoing calls. Finally, add a phone with your extension credentials, and you're done.

A Word About Security. PBX in a Flash has been engineered to run on a server sitting safely behind a hardware-based firewall with NO port exposure from the Internet. Leave it that way! It's your wallet and phone bill that are at stake.

Extension Setup. Now let's set up an extension to get you started. A good rule of thumb for systems with less than 50 extensions is to reserve the IP addresses from 192.x.x.201 to 192.x.x.250 for your phones. Then you can create extension numbers in FreePBX to match those IP addresses. This makes it easy to identify which phone on your system goes with which IP address and makes it easy for end-users to access the phone's GUI to add bells and whistles. To create extension 201 (don't start with 200), click Setup, Extensions, Generic SIP Device, Submit. Then fill in the following blanks USING VERY SECURE PASSWORDS and leaving the defaults in the other fields for the time being.

User Extension ... 201
Display Name ... Home
Outbound CID ... [your 10-digit phone number if you have one; otherwise, leave blank]
Emergency CID ... [your 10-digit phone number for 911 ID if you have one; otherwise, leave blank]

Device Options
secret ... 1299864Xyz [make this unique AND secure!]
dtmfmode ... rfc2833
Voicemail & Directory ... Enabled
voicemail password ... 14332 [make this unique AND secure!]
email address ... yourname@yourdomain.com [if you want voicemail messages emailed to you]
pager email address ... yourname@yourdomain.com [if you want to be paged when voicemail messages arrive]
email attachment ... yes [if you want the voicemail message included in the email message]
play CID ... yes [if you want the CallerID played when you retrieve a message]
play envelope ... yes [if you want the date/time of the message played before the message is read to you]
delete Vmail ... yes [if you want the voicemail message deleted after it's emailed to you]
vm options ... callback=from-internal [to enable automatic callbacks by pressing 3,2 after playing a voicemail message]
vm context ... default

Write down the passwords. You'll need them to configure your SIP phone.

Extension Security. We cannot overstress the need to make your extension passwords secure. All the firewalls in the world won't protect you from malicious phone calls on your nickel if you use your extension number or something like 1234 for your extension password if your SIP or IAX ports happen to be exposed to the Internet.

In addition to making up secure passwords, the latest versions of FreePBX also let you define the IP address or subnet that can access each of your extensions. Use it!!! Once the extensions are created, edit each one and modify the permit field to specify the actual IP address or subnet of each phone on your system. A specific IP address entry should look like this: 192.168.1.142/255.255.255.255. If most of your phones are on a private LAN, you may prefer to use a subnet entry in the permit field like this: 192.168.1.0/255.255.255.0 using your actual subnet.

Courtesy of wordle.net

Adding a Google Voice Trunk. There are lots of trunk providers, and one of the real beauties of having your own PBX is that you don't have to put all of your eggs in the same basket... unlike the AT&T days. We would encourage you to take advantage of this flexibility. With most providers, you don't pay anything except when you actually use their service so you have nothing to lose.

For today, we're going to take advantage of Google's current offer of free calling in the U.S. and Canada through the end of this year. You also get a free phone number in your choice of area codes. PBX in a Flash now installs a Google Voice module for FreePBX that lets you set up your Google Voice account with PBX in a Flash in just a few seconds once you have your credentials.

Signing Up for Google Voice. You'll need a dedicated Google Voice account to support PBX in a Flash. The more obscure the username (with some embedded numbers), the better off you will be. This will keep folks from bombarding you with unsolicited Gtalk chat messages, and who knows what nefarious scheme will be discovered using Google messaging six months from now. So keep this account a secret!

We've tested this extensively using an existing Gmail account rather than creating a separate account. Take our word for it. Inbound calling is just not reliable. The reason seems to be that Google always chooses Gmail chat as the inbound call destination if there are multiple registrations from the same IP address. So... set up a dedicated Gmail and Google Voice account, and use it exclusively with PBX in a Flash. Google Voice no longer is by invitation only. If you're in the U.S. or have a friend that is, head over to the Google Voice site and register. If you're living on another continent, see MisterQ's posting for some tips on getting set up.

You must choose a telephone number (aka DID) for your new account, or Google Voice calling will not work... in either direction. You also have to tie your Google Voice account to at least one working phone number as part of the initial setup process. Your cellphone number will work just fine. Don't skip this step either. Just enter the provided confirmation code when you tell Google to place the test call to the phone number you entered. Once the number is registered, you can disable it if you'd like in Settings, Voice Setting, Phones. But...

IMPORTANT: Be sure to enable the Google Chat option as one of your phone destinations in Settings, Voice Setting, Phones. That's the destination we need for PBX in a Flash to function with Google Voice! Otherwise, inbound and/or outbound calls will fail. If you don't see this option, you may need to call up Gmail and enable Google Chat there first. Then go back to the Google Voice Settings and enable it. Be sure to try one call each way from Google Chat in Gmail. Then disable Google Chat in GMail for this account. Otherwise, it won't work with PIAF.

While you're still in Google Voice Settings, click on the Calls tab. Make sure your settings match these:

  • Call Screening - OFF
  • Call Presentation - OFF
  • Caller ID (In) - Display Caller's Number
  • Caller ID (Out) - Don't Change Anything
  • Do Not Disturb - OFF
  • Call Options (Enable Recording) - OFF
  • Global Spam Filtering - ON

Click Save Changes once you adjust your settings. Under the Voicemail tab, plug in your email address so you get notified of new voicemails. Down the road, receipt of a Google Voice voicemail will be a big hint that something has come unglued on your PBX.

Configuring Google Voice Trunk in FreePBX. All trunk configurations now are managed within FreePBX, including Google Voice. This makes it easy to customize PBX in a Flash to meet your specific needs. Click the Setup tab and choose Google Voice in the Third Party Addons. To Add a new Google Voice account, just fill out the form:

Phone number is your 10-digit Google Voice number. Username is your Google Voice account name without @gmail.com. NOTE: You must use a Gmail.com address in the current version of this module! Password is your Google Voice password. NOTE: Don't use 2-stage password protection in this Google Voice account! Be sure to check all three boxes: Add trunk, Add routes, and Agree to TOS. Then click Submit Changes and reload FreePBX. Down the road, you can add additional Google Voice numbers by clicking Add GoogleVoice Account option in the right margin and repeating the drill. For Google Apps support, see this post on the PIAF Forum.

Outbound Routes. The idea behind multiple outbound routes is to save money. Some providers are cheaper to some places than others. It also provides redundancy which costs you nothing if you don't use the backup providers. The Google Voice module actually configures an Outbound Route for 10-digit Google Voice calling as part of the automatic setup. If this meets your requirements, then you can skip this step for today.

Inbound Routes. An Inbound Route tells PBX in a Flash how to route incoming calls. The idea here is that you can have multiple DIDs (phone numbers) that get routed to different extensions or ring groups or departments. For today, we'll build a simple route that directs your Google Voice calls to extension 201. Choose Inbound Routes, leave all of the settings at their default values except enter your 10-digit Google Voice number in the DID Number field. Enable CallerID lookups by choosing CallerID Superfecta in the CID Lookup Source pulldown. Then move to the Set Destination section and choose Extensions in the left pull-down and 201 in the extension pull-down. Now click Submit and save your changes. That will assure that incoming Google Voice calls are routed to extension 201.

IMPORTANT: Before Google Voice calling will actually work, you must restart Asterisk from the Linux command line interface. Log into your server as root and issue this command: amportal restart.

General Settings. Last, but not least, we need to enter an email address for you so that you are notified when new FreePBX updates are released. Scroll to the bottom of the General Settings screen after selecting it from the left panel. Plug in your email address, click Submit, and save your changes. Done!

Adding Plain Old Phones. Before your new PBX will be of much use, you're going to need something to make and receive calls, i.e. a telephone. For today, you've got several choices: a POTS phone, a softphone, or a SIP phone. Option #1 and the best home solution is to use a Plain Old Telephone or your favorite cordless phone set (with 8-10 extensions) if you purchase a little device known as a Sipura SPA-3102. It's under $70. Be sure you specify that you want an unlocked device, meaning it doesn't force you to use a particular service provider. This device also supports connection of your PBX to a standard office or home phone line as well as a telephone.

Configuring a SIP Phone. There are hundreds of terrific SIP telephones and softphones for Asterisk-based systems. Once you get things humming along, you'll want a real SIP telephone such as the $50 Nortel color videophone we've recommended previously. You'll also find lots of additional recommendations on Nerd Vittles and in the PBX in a Flash Forum. If you're like us, we want to make damn sure this stuff works before you shell out any money. So, for today, let's download a terrific (free) softphone to get you started. We recommend X-Lite because there are versions for Windows, Mac, and Linux. So download your favorite from this link. Install and run X-Lite on your Desktop. At the top of the phone, click on the Down Arrow and choose SIP Account Settings, Add. Enter the following information using 201 for your extension and your actual password for extension 201. Then plug in the actual IP address of your PBX in a Flash server instead of 192.168.0.251. Click OK when finished. Your softphone should now show: Available.

Enabling Google Voicemail. Some have requested a way to retain Google's voicemail system for unanswered calls in lieu of using Asterisk voicemail. The advantage is that Google offers a free transcription service for voicemail messages. To activate this, you'll need to edit the [googlein] context in extensions_custom.conf in /etc/asterisk. Just modify the last four lines in the context so that they look like this and then restart Asterisk: amportal restart

;exten => s,n(regcall),Answer
;exten => s,n,SendDTMF(1)
exten => s,n(regcall),Set(DIAL_OPTIONS=${DIAL_OPTIONS}aD(:1))
exten => s,n,Goto(from-trunk,gv-incoming,1)

But I Don't Want to Use Google Voice. If you'd prefer not to use Google Voice at all with PBX in a Flash, that's okay, too. Here's how to disable it and avoid the chatter in the Asterisk CLI. Log into your server as root and edit /etc/asterisk/modules.conf. Change the first three lines in the [modules] context so that they look like this. Then restart Asterisk: amportal restart.

autoload=yes
noload => res_jabber.so
noload => chan_gtalk.so

Incredible PBX. Just a cautionary note that Incredible PBX 2 was not designed for use with CentOS 6. Don't try it! Give us a few weeks to make some needed adjustments, and we'll let you know when it is safe to have a go at it.

A Final Word About Beta Software. We take great pride in our software. Before it reaches beta stage, you can rest assured that it's not only been tested, but it actually works. That doesn't mean it's bug free. You can help enormously by reporting bugs. Just leave a comment here, or log into the PIAF Forum and let us know about any issues you encounter. We hope you're as thrilled with this new release as we are. Happy Thanksgiving!

Originally published: Monday, November 21, 2011


Need help with Asterisk? Visit the PBX in a Flash Forum.
Or Try the New, Free PBX in a Flash Conference Bridge.

whos.amung.us If you're wondering what your fellow man is reading on Nerd Vittles these days, wonder no more. Visit our new whos.amung.us statistical web site and check out what's happening. It's a terrific resource both for us and for you.

 

Special Thanks to Our Generous Sponsors


FULL DISCLOSURE: ClearlyIP, Skyetel, Vitelity, DigitalOcean, Vultr, VoIP.ms, 3CX, Sangoma, TelecomsXchange and VitalPBX have provided financial support to Nerd Vittles and our open source projects through advertising, referral revenue, and/or merchandise. As an Amazon Associate and Best Buy Affiliate, we also earn from qualifying purchases. We’ve chosen these providers not the other way around. Our decisions are based upon their corporate reputation and the quality of their offerings and pricing. Our recommendations regarding technology are reached without regard to financial compensation except in situations in which comparable products at comparable pricing are available from multiple sources. In this limited case, we support our sponsors because our sponsors support us.

BOGO Bonaza: Enjoy state-of-the-art VoIP service with a $10 credit and half-price SIP service on up to $500 of Skyetel trunking with free number porting when you fund your Skyetel account. No limits on number of simultaneous calls. Quadruple data center redundancy. $25 monthly minimum spend required. Tutorial and sign up details are here.

The lynchpin of Incredible PBX 2020 and beyond is ClearlyIP components which bring management of FreePBX modules and SIP phone integration to a level never before available with any other Asterisk distribution. And now you can configure and reconfigure your new Incredible PBX phones from the convenience of the Incredible PBX GUI.

VitalPBX is perhaps the fastest-growing PBX offering based upon Asterisk with an installed presence in more than 100 countries worldwide. VitalPBX has generously provided a customized White Label version of Incredible PBX tailored for use with all Incredible PBX and VitalPBX custom applications. Follow this link for a free test drive!
 

Special Thanks to Vitelity. Vitelity is now Voyant Communications and has halted new registrations for the time being. Our special thanks to Vitelity for their unwavering financial support over many years and to the many Nerd Vittles readers who continue to enjoy the benefits of their service offerings. We will keep everyone posted on further developments.
 

Some Recent Nerd Vittles Articles of Interest...

7 Steps to Skytopia: Pain-Free Calls with Skype and Asterisk

Tuesday, November 1, 2011 / 5 Comments on 7 Steps to Skytopia: Pain-Free Calls with Skype and Asterisk

As you probably know, Digium® announced that Skype for Asterisk® would not be available for sale or activation after July 26, 2011. Here we are in November. So what to do? If you're looking for a commercial solution, you're S.O.L. But, if you have a non-commercial PBX for personal use1, then keep reading. We'll walk you through, step-by-step, getting Skype integrated into your PBX in a Flash or Incredible PBX environment. It's easy, but it's a manual process. If you follow the steps below in order, you'll be up and running in about 15 minutes.

Prerequisites. For today's project, we're assuming you have an existing Incredible PBX server running CentOS 5.7. If not, here's our tutorial to get you up and running quickly. You'll also need a keyboard, mouse, and monitor. We strongly recommend a dedicated server such as an Atom-based PC. If you're using a virtual machine, then you'll need a sound card alternative. Try this: /sbin/modprobe snd-dummy.

UPDATE: We've revised this article a bit to accommodate PIAF2 with CentOS 6.2 and Incredible PBX 3. Keep in mind that Skype is a 32-bit application so we strongly recommend a 32-bit platform if reliability matters to you.

Step 1. For inbound Skype calling to work with other implementations including generic PBX in a Flash systems, you'll need to create a SIP URI for your Asterisk server: mothership@127.0.0.1. You do NOT need to expose the SIP port(s) of your Asterisk server to the Internet, and we strongly recommend that you don't! We've previously explained how to set up a SIP URI in this article. The Incredible PBX includes this SIP URI functionality out of the box.

Step 2. You'll also need Java 1.5. To see if it's included in your distribution, issue the following command: rpm -q jdk. If your particular Asterisk distribution doesn't have JAVA 1.5 or higher installed (rpm -q jdk), here's how to do it. Go to the Oracle Technology Network, sign up for a free Oracle web account and log in. While still logged in, accept the binary code license agreement, and click on this link to download jdk-6u12-linux-i586-rpm.bin. Then copy the file to /root on your Asterisk server. Make the file executable (chmod +x jdk-6u12-linux-i586-rpm.bin) and then run it. Scroll down the wordy license agreement AGAIN and type yes. Java 1.6 then will be installed on your system. Whew!

Step 3. You'll also obviously need a dedicated Skype account for your Asterisk server. If you don't have one to spare, download the Skype software for your Mac or Windows PC, and sign up for a free account. You can try out your account by calling our demo hotline: nerdvittles. Get this working on your Mac or PC before proceeding! Then be sure you log out and disable automatic logins on reboot, or you'll have a problem down the road with two machines trying to log in to a single Skype account.

Step 4. Now we're ready to install the remaining software components that your server will need to access Skype. Log into your Asterisk server as root and issue the following commands.

cd /root
mkdir skype
cd skype
wget http://download.skype.com/linux/skype_static-2.1.0.47.tar.bz2
tar jxvf skype_static*
yum -y install xorg-x11-server-Xvfb
yum -y install qt4
yum -y install xterm
yum -y install libXScrnSaver.i386 < == use this for CentOS 5.x #yum -y install libXScrnSaver <== use this for CentOS 6.x wget http://incrediblepbx.com/siptosis.tgz cd .. wget http://incrediblepbx.com/skype-start chmod +x skype-start cp skype-start skype/. cd / tar zxvf /root/skype/siptosis.tgz cd /root/skype

If you'd prefer to avoid all the typing, you can issue the following commands to download a script that will do all the heavy lifting for you. This is for CentOS 5.x systems only:

cd /root
wget http://incrediblepbx.com/skype-setup
chmod +x skype-setup
./skype-setup

For PIAF2 systems running CentOS 6.x, use this instead:

cd /root
wget http://incrediblepbx.com/skype-setup2
chmod +x skype-setup2
./skype-setup2

Step 5. Now there are a few steps to manually configure the software components so that the entire Skype startup process can be automated when your server boots in the future. To begin, you'll need to fire up X-Windows which puts your server in graphics mode. This is the only mode that Skype understands. While logged into your server as root, issue the following command: xinit

NOTE: If xinit won't start on your particular machine, you may need to create /etc/X11/xorg.conf. Here's a generic config file that should work fine for CentOS 5.x systems:

Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
EndSection

Section "Device"
Identifier "Card0"
Driver "vesa"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
SubSection "Display"
Viewport 0 0
Depth 16
Modes "800x600"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "800x600"
EndSubSection
EndSection

For PIAF2 users, some have reported issues on Atom machines with seeing a display at all after xinit loads. If this happens to you, don't panic. Simply log into your server from a PC or MAC using SSH. Then run: vncserver :1. Set a password for VNC, and then use a VNC client on your PC or Mac to access VNC at the IP address of your server on display port 1. Now you can continue with Step 6, below.

Step 6. Now we're ready to start up Skype, and get it properly configured. There are two important requirements. First, we want to make sure your credentials are saved for automatic login in the future. And second, we want to configure Skype to run in a minimized state each time it restarts. To begin, click in the white graphics window on your screen using your mouse and issue these commands:

cd /root/skype/skype_static-2.1.0.47
./skype

Click on the Accept button to accept the Skype license agreement. Once Skype loads, enter your Skype Name and Password. Before clicking on Sign In, be sure to check the Automatic Sign In box so that you'll be logged in automatically in the future. Once you're logged in, click on the blue S in the lower left corner of the window to access the Skype Main Menu. Then click Options. When the General tab displays, check the box which says Start Skype minimised in the system tray. Then click the Apply button. To test things out, click on the Sound Device tab and then Make a Test Call. Once you're sure everything is working, click the Close button. Now click on the blue S again and click Quit to shut down Skype.

Step 7. Now we're ready to integrate Skype into the SipToSis middleware so that Asterisk can communicate with Skype. Issue the following commands to start Skype in background mode and then start SipToSis. Be sure to write down the PID for Skype in case we need to kill the app if something goes wrong.

./skype &
cd /siptosis
./SipToSis_linux

A message from Skype will pop up asking if you want to authorize external use of Skype. Before clicking Yes, be sure to click the Checkbox to Remember This Selection for future connections! When you click Yes, you'll see the SipToSis CLI indicating that it's waiting for a Skype call.

If you've installed this on an Incredible PBX, Skype should now be functional. From another Skype account, just call the Skype Name that you used to set this up, and your Asterisk extensions should start ringing. To test outbound Skype calling, use an X-Lite softphone connected to an extension on your Asterisk server and dial *echo123 to access Skype's call testing service or *nerdvittles to access our demo.

All that remains is to configure your server to automatically start Skype and SipToSis whenever your system is restarted. Here's how. Press Ctrl-Alt-F2 to get a new login prompt on your server. Log in as root and issue the following command:

echo "/root/skype-start" >> /etc/rc.d/rc.local

Now reboot your server and make sure everything is working.

Navigation Tips. Here are a few navigation tips for managing your Asterisk console on CentOS systems once Skype has been installed:

1. Ctrl-Alt-F2 gets you a new login prompt for your server

2. Ctrl-Alt-F7 gets you back to the SipToSis/Skype session. You can kill SipToSis by holding down Ctrl-C for several seconds. To find the Skype PID: pidof skype. To kill Skype: kill pid#. To restart Skype: skype & and to restart SipToSis, just issue the command again: ./SipToSis_Linux

3. Ctrl-Alt-F9 gets you to the Asterisk CLI.

Setting Up Speed Dials for Skype Friends. One of the wrinkles with Skype is that Skype uses names for its users rather than numbers. If you don't have a SIP URI-capable softphone, there's still an easy way to place calls to your Skype friends using FreePBX®. Just add a Speed Dial number to your FreePBX dialplan. Choose Extension, then select the Custom type, provide an Extension Number which is the Speed Dial number (this could actually spell your friend's name using a TouchTone phone), enter a Display Name for your friend, and add an optional SIP Alias. Then insert the following in the dial field replacing joeschmo with your friend's actual Skype name. Save your entries and reload the dialplan when prompted.
SIP/joeschmo@127.0.0.1:5070

Security Warning. One final note of caution. Do NOT expose UDP port 5070 to the Internet unless you first secure this port with a username and password to avoid Internet intruders using your gateway as a free Skype dialing platform! You do not need 5070 exposed to the Internet to implement today's gateway solution for inbound or outbound Skype calling from your Asterisk server so we recommend you keep it securely behind at least a hardware-based firewall.

FreePBX Design. For those not using Incredible PBX, here is the FreePBX setup that Incredible PBX uses and that we recommend. For outbound Skype calls, you have two choices.

1. To place a call to a regular phone number using SkypeOut (which costs you money), you'll simply dial 8 plus the area code and number. Our foreign friends will have to adjust their dialplans and /siptosis/SkypeOutDialingRules.props accordingly. Today's setup assumes 10-digit phone numbers!

2. To place a call to a Skype username using a softphone that supports SIP URI dialing such as X-Lite, you simply precede the Skype username with an asterisk, e.g. *echo123 will connect you to the Skype Call Testing Service or *nerdvittles will connect you to the Nerd Vittles Skype demo.

For incoming Skype calls, the default setup routes those calls to a SIP URI: mothership@127.0.0.1. Whether you point this URI to an extension, ring group, or IVR is up to you. In the default Incredible PBX build, the mothership URI is pointed to the Stealth AutoAttendant, an IVR that plays a welcoming message and then transfers the call to a ring group if no digit is pressed by the caller.

Configuring FreePBX. To put this setup in place, use a web browser to access FreePBX on your Asterisk server. You'll need to create a Custom Trunk and then an Outbound Route.

1. Choose Setup, Add Trunk, Add Custom Trunk. Fill in the form so that it looks like the following using your own CallerID number obviously:

When you're finished, click the Submit Changes button and then reload the dialplan when prompted.

2. Next choose Setup, Outbound Routes, Add Route. Fill in the form so that it looks like this:

When you're finished, click the Submit Changes button. Be sure to move this new OutSkype route to the top position in your Outbound Routes listing in the right margin! Then reload the dialplan when prompted.

3. If you're not using Incredible PBX, add a new DayNight Control 1 option while you're still in FreePBX. Just specify where you want calls routed for Day mode and Night mode. Then, here's the easy way to activate SIP URI support on your Asterisk/FreePBX server. Copy the [from-sip-external] context from the extensions.conf file in /etc/asterisk. Now copy the content into extensions_override_freepbx.conf. Be sure to preserve the context name in brackets! On a FreePBX 2.8 system, make it look like the following. The additions we're making are shown in bold below:

[from-sip-external]
;give external sip users congestion and hangup
; Yes. This is _really_ meant to be _. - I know asterisk whinges about it, but
; I do know what I'm doing. This is correct.
exten => _.,1,NoOp(Received incoming SIP connection from unknown peer to ${EXTEN})
exten => _.,n,Set(DID=${IF($["${EXTEN:1:2}"=""]?s:${EXTEN})})
exten => _.,n,Goto(s,1)
exten => s,1,GotoIf($["${ALLOW_SIP_ANON}"="yes"]?from-trunk,${DID},1)
exten => mothership,1,Goto(app-daynight,1,1)
exten => s,n,Set(TIMEOUT(absolute)=15)
exten => s,n,Answer
exten => s,n,Wait(2)
exten => s,n,Playback(ss-noservice)
exten => s,n,Playtones(congestion)
exten => s,n,Congestion(5)
exten => h,1,NoOp(Hangup)
exten => i,1,NoOp(Invalid)
exten => t,1,NoOp(Timeout)

Finally, reload your Asterisk dialplan, and we're finished with Asterisk and FreePBX setup:

asterisk -rx "dialplan reload"

Fedora Builds. For those using recent Fedora builds, these systems have a full implementation of X-Windows and KDE. Just start the system in mode5 (graphics mode), log in, run Skype in one window and start up SipToSis in a terminal window using the commands in Step 7 above. Authorize external use of Skype when prompted.

Where To Go From Here. Well, those are the basics. You now can make one outbound Skype call at a time from your Asterisk server, and you can receive an inbound Skype call on any Asterisk extension when Skype users call your regular Skype name. If you want multiple Skype account support, then you'll need to do some tweaking. What you'll need is the STS Trunk Builder toolkit which is free, but proprietary. Enjoy!

Originally published: Tuesday, November 1, 2011

Great News! Google Plus is available to everyone. Sign up here and circle us. Click these links to view the Asterisk feed or PBX in a Flash feed on Google+.


Need help with Asterisk? Visit the PBX in a Flash Forum.
Or Try the New, Free PBX in a Flash Conference Bridge.

whos.amung.us If you're wondering what your fellow man is reading on Nerd Vittles these days, wonder no more. Visit our new whos.amung.us statistical web site and check out what's happening. It's a terrific resource both for us and for you.

 

Special Thanks to Our Generous Sponsors


FULL DISCLOSURE: ClearlyIP, Skyetel, Vitelity, DigitalOcean, Vultr, VoIP.ms, 3CX, Sangoma, TelecomsXchange and VitalPBX have provided financial support to Nerd Vittles and our open source projects through advertising, referral revenue, and/or merchandise. As an Amazon Associate and Best Buy Affiliate, we also earn from qualifying purchases. We’ve chosen these providers not the other way around. Our decisions are based upon their corporate reputation and the quality of their offerings and pricing. Our recommendations regarding technology are reached without regard to financial compensation except in situations in which comparable products at comparable pricing are available from multiple sources. In this limited case, we support our sponsors because our sponsors support us.

BOGO Bonaza: Enjoy state-of-the-art VoIP service with a $10 credit and half-price SIP service on up to $500 of Skyetel trunking with free number porting when you fund your Skyetel account. No limits on number of simultaneous calls. Quadruple data center redundancy. $25 monthly minimum spend required. Tutorial and sign up details are here.

The lynchpin of Incredible PBX 2020 and beyond is ClearlyIP components which bring management of FreePBX modules and SIP phone integration to a level never before available with any other Asterisk distribution. And now you can configure and reconfigure your new Incredible PBX phones from the convenience of the Incredible PBX GUI.

VitalPBX is perhaps the fastest-growing PBX offering based upon Asterisk with an installed presence in more than 100 countries worldwide. VitalPBX has generously provided a customized White Label version of Incredible PBX tailored for use with all Incredible PBX and VitalPBX custom applications. Follow this link for a free test drive!
 

Special Thanks to Vitelity. Vitelity is now Voyant Communications and has halted new registrations for the time being. Our special thanks to Vitelity for their unwavering financial support over many years and to the many Nerd Vittles readers who continue to enjoy the benefits of their service offerings. We will keep everyone posted on further developments.
 

Some Recent Nerd Vittles Articles of Interest...

  1. Excerpt from the Skype Terms of Service: "Subscriptions are for individual use only. Each subscription is to be used by one person only and is not to be shared with any other user (whether via a PBX, call centre, computer or any other means). Each subscription is to be used for your own personal communication purposes only, to make calls to another individual. The use of the subscription for commercial gain, such as calling numbers specifically to generate income for yourself or others by placing such calls, is not permitted. Unusual call patterns may be considered indicative of such use and may result in us terminating your subscription and blocking your User Account in accordance with paragraph 11.2." [↩]

Post navigation

← Older posts Newer posts →

Support Nerd Vittles



Free Asterisk Solutions

free counters